Hot Rods 327 Oil Pan (Small Journal)

I am trying to straighten out a mess caused by a backyard mechanic. He put a late model SBC oil pan on an early block ('64) with the original timing cover and THIN one-piece felpro gasket. Naturally oil, EVERWHERE. I need help locating an early oil pan. I tried all the usual outlet but no one either knows what I'm talking about, or doesn't make one. It is the pan that measures 2 1/4" from the base of the block to center of the sealing lip on the front of the pan. Someone surley has one they can part with???? Thanks for helping, Scott

 

I have one from a 57 283 but not sure when I could ship it

 

Just put a thick gasket with the pan you've got.
The original mechanic's mistake was using the thin front seal with the '74-85 pan lip.
Rear seal size and timing cover groove are the same across all years of 2-piece rear main seal blocks '55-85. doesn't matter small or large journal..
Front pan lip size and which side for dipstick are the only other changes that effect gasket fit.
Why a different pan when all you need is the correct gasket??