Need help looking to buy 67 327 cast #3903352 suffix k01 11 k11 can anybody help I figured out everything but the k11 # thx
KH is a vette motor, KM is a full size car motor. Figure out which it is, connecting those 1s. test your photography skills, post a clear, large picture of it
Aren't they all Squirrel? I have yet to find a "vette" motor in a hotrod locally that hasn't been decked and stamped. No broach marks, no vette motor OP. Make sure you don't pay extra for something its not. Post a close up of the pad. Happy hunting hamber!
From my MSA-1 codes book, there are no K_ _ suffix codes.....there are some K _ two-letter codes but no three letter codes starting with K. IF there is a number in the three letter code, it is almost always in the center.....except almost all marine small block codes start with a number followed by two letters. I checked Buick, Olds, and Pontiac....no K** codes
I'm going on the hypothesis (big word!) that the "11" is really a single letter, that has a vertical bar on each side, such as an H or an M.
If I am right, which doesn't seem to be happening much these days. It looks like that engine was built or at least the block was cast in Canada. Could it be a code for up there??
Casting # 3892657 is the only one used in 67 vette... KH suffix used per NCRS.. KE 67 full size, with 4 speed, used the 352 cast #...that's what I find in my library...
a bit of trivia...in addition to the Corvette KH suffix blocks, there was a KH suffix for a 1956 265 205hp manual trans 4bbl C-60 RPO 410