1955 354 Hemi, that been bored .030 over, and has a Bryant billet crank with a 4 inch stroke. 4 bolt main billet main caps, and all machine work is done. 2 sets of Hemi hothead aluminum heads, ported by Roger Lechtenburg, the guy that originally desinged the aluminum heads. Comes with Manley valves and Manton pushrods, and Johnson high lift lifters. I have 3 sets of copper head gaskets different thickness. Multiple sets of valve cover, and intake gaskets made by Cometic. It also comes with a very rare magnesium blower intake, that has also been ported and machined by Roger. I have new GRP aluminum rods, with pinned chevy main bearings and Ross racing pistons, rings have not been fit yet. with a Racer Brown solid roller cam, specs in pic. I have Missel rockers, and new missel oil pump. Heads and block have been o-ringed already. Comes with a newly rebuilt MSD distributor, and a milodon gear drive. I have 2 sets of zommie 2.5" headers, 1 has baffles and one don't. Cam bearings are installed, and have main and rod bearings. Crank has been fit and everything has been balanced. I am sure there is something that I am missing, so I might add more. I also have the polished valve covers, breathers and oil pan. I have a new in box Littlefield 8-71 blower polished blower, and some electronics that will be offered to buyer first. I will NOT sell until motor is gone. This motor was being built to run Nitro if I wanted to. All the parts are some of the best around. I have alot of extra parts for it also that will go with motor. I can answer most questions and have more pics if needed.
The Jalopy Journal
