Projects 36 ford custom build (MISS SCARLET)

Kipp, I was in the shop until about 30 minutes ago myself. On my knees installing carpet pad, ouch. It has taken most of the day, except for couple rest stops to catch up with the playoff games, neither of which came out to my liking. But the padding came out ok, an awful lot of cutting, fitting and glueing. While I was out there plugging along, I thought about you and how you were doing, painting a car is a damn lot of work. If you do it right, to get into all the crev***es it can really take a lot time. So I was not surprised to see that it took all day and night to get done what you have. You probably have one sore arm holding that gun out there for hours. Too me that is another indicator that the results will be spectacular. I'm betting your whipped. Congratulation! Go ahead and sleep-in, it's Sunday and you're almost done!
Best Regards and good luck with all your endeavors, KB.

 

Thanks everyone for the support. Eric, Ryan, Kenneth, K B, Longoner, and everyone else. Yesterday was very long. Hopefully today goes a little smoother(and quicker) only time will tell. I think I wore pore Milkweed out yesterday by the time we were done he looked like a zombie but she looks stellar so I am very happy.

 

We started the day yesterday with cleaning the spray booth. Then it was on to cleaning the body over and over and over and over until Milkweed was happy with her. Friday while I was at work john (the prep and painter at Euro Sport) went over the body looking for flaws and fixing any he found then cleaned her off. Thanks John. So she was very clean by the time we were done.

1936 Body Paint 001 by kippers 34 posted Jan 11, 2015 at 7:30 AM

1936 Body Paint 002 by kippers 34 posted Jan 11, 2015 at 7:30 AM

 

Now it was time to prime. With the trunk, rear fenders, skirts, and body ready we tinted the sealer and then started to spray.

1936 Body Paint 003 by kippers 34 posted Jan 11, 2015 at 7:30 AM

1936 Body Paint 004 by kippers 34 posted Jan 11, 2015 at 7:30 AM

 

When we were done priming we went over everything again with a fine tooth comb. We found a few pinholes in both rear fenders and a couple tiny flaws on the lip of the trunk so we needed to address them before we moved forward. After fixing every thing to satisfaction we were ready to move on to base when at a angle I noticed a slight ripple at the top of the deck lid so we pulled it from the booth and started to base the body.

1936 Body Paint 005 by kippers 34 posted Jan 11, 2015 at 7:30 AM

1936 Body Paint 006 by kippers 34 posted Jan 11, 2015 at 7:30 AM

 

While Milkweed was spraying base I kept a cup of paint mixed and ready and I wet sanded the deck lid so we could re spray it today.With the body totally based and drying it was time to get the clear ready to spray. Between base and clear we inspected every thing again and I was very pleased with the results so it was time to clear.

1936 Body Paint 008 by kippers 34 posted Jan 11, 2015 at 7:32 AM

1936 Body Paint 007 by kippers 34 posted Jan 11, 2015 at 7:30 AM

 

Milkweed spent several hours spraying clear and put over a gallon down so she will be very deep even after color sanding and buffing. we finished up at about 100 am witch made for a long day but I am extreamly pleased with the results.

1936 Body Paint 009 by kippers 34 posted Jan 11, 2015 at 7:32 AM

1936 Body Paint 010 by kippers 34 posted Jan 11, 2015 at 7:32 AM

Now it is time to go pull her from the booth and get the rest painted so I am off to the paint shop for another long day.

 

I'm enjoying this build, really good work.

 

The minute the clear hit she came alive! Always the most exciting part of paint in my opinion.

 

Love the color. I may have missed it in the thread but what are the plans for interior/color?

 

Wow. Simply stunning.

 

Thanks.

The most exciting part is when the paint is completely done. But yes Ryan she glows!

That is funny ****!

The interior has to be white for this build.

Thanks. She came out beautifull.

 

This morning I went in and rolled her out of the paint booth to get a good look.

1936 Ford Paint 2 002 by kippers 34 posted Jan 11, 2015 at 8:29 PM

1936 Ford Paint 2 001 by kippers 34 posted Jan 11, 2015 at 8:29 PM

She looked simply stunning!

 

Three stunning rods in a row.

1936 Ford Paint 2 005 by kippers 34 posted Jan 11, 2015 at 8:29 PM

Or three fat ***es!

1936 Ford Paint 2 008 by kippers 34 posted Jan 11, 2015 at 8:32 PM

 

Today went well. Most of the paint is complete and ready for cut and buff. Will post more pic's tomarrow.

 

Stunning indeed. The color is so deep, well done!

 

That's a nice deep rich color . Looks awesome . I'll be watching for ***embly like so many others .

 

Great colour selection, you must be pumped at this stage!

 

Beautiful - color as well as workmanship. I only wish mine were at that stage !

 

Damn! Milkweed IS good for something after all! And his pickup is pretty cool too!

 

Beautiful, very nice color. Great work guys.

 

Awesome work guys!

 

Looks great!

 

So cool. I can't wait to see it start to go together.

 

Now the fun begins. Nothing like the final ***embly when building these cars....paint looks great.

 

Thanks. And aero strait to.

Thanks. As soon as I can get her polished the ***embly is on.

She came out better than I could have imagined.

Thanks. i'll be happy when she is done.

 

Whod a Thunk ?

Thanks. She came out absolutely stunning!

Thanks Eric.

Thanks.

Soon I hope.

It's all down hill from here.

 

Sunday morning came far to early. I met **** at the paint shop and started the day. After cleaning the booth out and unhanging the rear fenders I hung the hood and re filled the booth with parts.
After the booth was full I started to clean every thing. Then I inspected for any flaws that remained. There were a few little things that needed addressing before paint begins.

1936 Ford Paint 2 006 by kippers 34 posted Jan 11, 2015 at 8:29 PM

 

Upon final inspection before paint I found I spot on the p***enger front fender that was damaged in transportation. As bad as I wanted to finish all the painting I pulled the fender for repair and tacked the remaining parts for sealer.
Everything was primed and then painting started.

1936 Ford Paint 2 009 by kippers 34 posted Jan 11, 2015 at 8:32 PM

By now the paint gun was starting to get heavy but Milkweed kept spraying

1936 Ford Paint 2 013 by kippers 34 posted Jan 11, 2015 at 8:34 PM

And spraying. There was a lot of surface area on her to cover. finaly at around seven(eleven hours later) We finished. All but the front fender are now in paint.

1936 Ford Paint 2 014 by kippers 34 posted Jan 11, 2015 at 8:34 PM

I can now breath for a moment before the next hurtle.