365 caddy crankshaft brgs

The crank I have has .050" under connecting rod brgs and .025" under main brgs and it needs a grind to clean up.Would anyone know who could supply brgs around these sizes.
I thought these were down alot so I measured up a second crank I have only to find not alot of difference in this one also.
They both had brgs to suit these grinds so they must be out there.
I have tried Falcon spares with no luck and am waiting to hear from Kanters.
Any Idea's?

Thanks

 

Egge Machine

http://www.egge.com/PDFs/CADILLAC-LASALLE_Kits.pdf

 

If it is a forged crank why not weld it up and start over?

.

 

Thanks for the replies,treb11 I tried egge and they only go to .040" for the connecting rods,any other idea's?
73RR,yeah as you would know it can be done but at present a last resort,I would
probably go for another crank nearer to standard but thanks for the input.

Still looking if anyone else can help,everything is light on the ground down here for caddys.
Thanks

 

http://www.kanter.com/p17-can.html

Kanter appears to go to .060