Register now to get rid of these ads!

Features 41-48 Ford and Merc Picture Thread!

Discussion in 'Traditional Customs' started by nitrobrother, May 1, 2013.

  1. 504640
    Joined: Aug 8, 2011
    Posts: 533

    504640
    Member

    10325635_10201861074763221_8851510972556896967_n.jpg 480_270_csupload_25433159.jpg 480_270_csupload_25433212.jpg Here is my 46 Super deluxe fordor, Dixie Delux. It runs the stock flathead through open exhaust. The already nosed hood will be louvered and the side trim removed, replaced with a 51 ford CUSTOM fender spear. I have had some new "old" pinstriping added to the original patina'd fenders. I hope to have the distinct body line on the front fenders scalloped. I have 53 buick headlight rims for it. Presently, my fog lights are the turn signals. They'll be removed because the buick parking light will act as turn signals.
     
    DRUGASM, Greaser Bob and Model T1 like this.
  2. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 32,271

    Jalopy Joker
    Member

  3. DrivenDead
    Joined: Apr 21, 2009
    Posts: 417

    DrivenDead
    Member

    My 48 and my plans
     

    Attached Files:

    DRUGASM, Greaser Bob and Scooterville like this.
  4. DrivenDead, what are those headlight rings?
    I like it!
     
  5. ...to my eye, this car is flat out beautiful
    [​IMG]
     
    DRUGASM, Greaser Bob, BigO and 3 others like this.
  6. DrivenDead
    Joined: Apr 21, 2009
    Posts: 417

    DrivenDead
    Member

    T-bird
     
  7. eric54chevy
    Joined: Jun 3, 2009
    Posts: 988

    eric54chevy
    Member
    from TEXAS!

    Here's one of my 41 Mercs
    ImageUploadedByH.A.M.B.1429014152.145172.jpg
     
  8. Tim
    Joined: Mar 2, 2001
    Posts: 18,189

    Tim
    Member
    from KCMO

    image.jpg Here's our 46
     
    DRUGASM, Greaser Bob, e z i and 6 others like this.
  9. magoozi
    Joined: May 20, 2009
    Posts: 1,796

    magoozi
    Member
    from san diego

    For some more pics, check out a thread I did a couple of years ago, A tale of 3 chops and the revival of the 41 to 48 fords
     
  10. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,698

    Bigcheese327
    Member

    Dang, that's tasty. What's under the hood? How'd you get it so low?
     
  11. Tim
    Joined: Mar 2, 2001
    Posts: 18,189

    Tim
    Member
    from KCMO

    Tall grass ;) haha its as low as I can get it with out scrub line issues, or shorter tires.

    The bottom of the front bumper gaurds are 8.5 inches from the ground with a 27 inch tall tire.

    Front: stock cross member, posies 3 inch drop spring with reverse eyes, longer shackles, pan hard bar modified to work with the changes and a dropped stock axle from Sid. Havnt measured how much drop is actualy there. I could get it lower with a shorter tire but I'd rather have the tire tuck up in there a little.

    In the back I have a tci parallel spring set up with no blocks or anything and the same 27 inch tall tire in back.

    Still have the stock front sway bar but we did end up putting tube shocks in front.

    This summer I might borrow a pair of taller tires to try on back, and I plan on eventually putting a fatter sway bar on front and adding one on the back but those don't have anything to do with ride height haha
     
    Olson and Bigcheese327 like this.
  12. Tim
    Joined: Mar 2, 2001
    Posts: 18,189

    Tim
    Member
    from KCMO

    Shot of it with no grass, no caps and very dirty.

    image.jpg
     
    MO_JUNK, DRUGASM, Greaser Bob and 2 others like this.
  13. Tim
    Joined: Mar 2, 2001
    Posts: 18,189

    Tim
    Member
    from KCMO

    Oh and @Bigcheese327 it's got a little baby stroker sbc in it
     
  14. fibben
    Joined: Feb 22, 2009
    Posts: 10

    fibben
    Member
    from sweden

    Im almost done with my -47
     
  15. 345winder
    Joined: Oct 27, 2010
    Posts: 1,059

    345winder
    BANNED

    47ford.jpg 47ford1.jpg

    here's my 47 super deluxe...I just got it on the road a couple weeks ago.
     
    Kelly Burns, lucky, DRUGASM and 13 others like this.
  16. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,776

    1-SHOT
    Member
    from Denton

    Magoozi how about a link to the thread you mentioned. Thanks Frank
     
  17. svodoc
    Joined: Jan 1, 2010
    Posts: 44

    svodoc
    Member

    345winder...that is a damn good looking ride
     
    345winder likes this.
  18. 50Fraud
    Joined: May 6, 2001
    Posts: 10,099

    50Fraud
    Member Emeritus

    ...and?
     
  19. Tim
    Joined: Mar 2, 2001
    Posts: 18,189

    Tim
    Member
    from KCMO

    345 what's under your 47? That things down there!
     
  20. Tim
    Joined: Mar 2, 2001
    Posts: 18,189

    Tim
    Member
    from KCMO

    image.jpg Another of Mine because it's finaly out and about for spring :)
     
  21. 345winder
    Joined: Oct 27, 2010
    Posts: 1,059

    345winder
    BANNED

    S10 clip with a rack& pinion , parrell leafs in the back with blocks
     
    Tim likes this.
  22. fibben
    Joined: Feb 22, 2009
    Posts: 10

    fibben
    Member
    from sweden

    My -47 from sweden almost done!
     

    Attached Files:

    Kage, Greaser Bob, BigO and 4 others like this.
  23. Jersey Joe 67
    Joined: Jun 12, 2008
    Posts: 427

    Jersey Joe 67
    Member
    from J Town

    I know this is a picture thread so I was wondering if one of you guys can post a pic of the tool tray in the trunk of a 46 coupe.
    I'm in the process of having floors put in and wanted to see what it looked like.
    Thanks.
     
  24. Fibben, that is very cool...nice job![​IMG]
     
    Kage, DRUGASM, Greaser Bob and 3 others like this.
  25. matchinthebox
    Joined: Nov 2, 2013
    Posts: 5

    matchinthebox
    Member


    I love these bumpers. Anyone know what car they might be from?
     
    Greaser Bob and Model T1 like this.
  26. Some more from NZ. JW[​IMG]
     
    Greaser Bob likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.