Technical 49-51 Merc door window garnish chop help

Thanks for posting pics. Btw is that a Kenny Kent dealer emblem on ur wall? If so that's from my hometown. Anyway advice on how to remedy this? Without taking two steps back? I did have the whiskers for the trim, but they were in bad shape. I guess I for sure need to take this out to finish chopping the trim. I don't like the outside trim, but this is a driver.

Sent from my SM-A102U using The H.A.M.B. mobile app

 

Also there current are no whiskers or dew wipes on the outside

Sent from my SM-A102U using The H.A.M.B. mobile app

 

That's an old Kenworth truck badge. Part is broke off and missing. I don't know how to tell you to fix what you have without you going backwards a bit. What it looks like you have there is all wrong according to what the factory did. It's just to much stuff. The wipers that fix on the door opening should be exact to what goes on the trim molding. The piece that goes on the door frame B post and across the top of door is just flat thin rubber. The only U channel piece I know of is in the metal guide on the B side of the door below the window opening.