Register now to get rid of these ads!

1952-59 Ford 54 Parts

Discussion in 'Off Topic Hot Rods & Customs' started by firerod63, Oct 4, 2011.

  1. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    So I ran into a guy the other day when I was out drivin Thunder. He said he had a bunch of parts for his 54 that he would be willing to get rid of if I just showed up to get em. I got to looking through the 3 boxes of stuff he gave me. I think I can use some of the stuff on my 52, but some I can't. So, I thought I'd see if any of you guys might need some stuff. Most notable are a set of tail light lenses, and dash cluster surround (no gauges) including the gl*** dash top piece. If anyone wants this stuff, lemme know and I will try to get some pictures up of requested parts.
     
  2. baker53
    Joined: Jan 17, 2003
    Posts: 329

    baker53
    Member

    I'm looking for a headlight switch with bezel and knob/shaft. Any of those parts there? Bill, Spring, TX
     
  3. 54HotRod
    Joined: May 31, 2010
    Posts: 509

    54HotRod
    Member

    I'm looking for the inner fender splash aprons for both sides if you happen to have those.
     
  4. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    baker53 I know theres some switches in there. I will pull the boxes down either thurs or fri and get you some pics and you can see if you like them. they are black knobs with a chrome bullet like end.

    54hotrod, unfortunately, I don't think there are any splash aprons in the boxes. if you want, shoot me a pic and I will see what I can find in the boxes. pretty sure theres nothin like that, but I'm gettin em down anyway so I might as well check it out.
     
  5. Retro Jim
    Joined: May 27, 2007
    Posts: 3,853

    Retro Jim
    Member

    Baker63 , Macs has the headlight switch , knob with shaft and bezel for the 54 . I made that post on another post that someone was looking for the headlight switch . If you go to MACS it's easy to find !

    Jim
     
  6. baker53
    Joined: Jan 17, 2003
    Posts: 329

    baker53
    Member

    Firerod63: Thanks, I am also looking for the Bezel for the ignition switch. I have as aftermarket ignition switch but no bezel for it. I believe it will have lettering on it like ACC OFF ON START, but don't know for sure.
    Retro Jim: I checked the Mac's on-line catalog and found the light switch, but did not see the ***ociated knob/shaft and the bezel for a 54 Ford.
     
  7. JeffB2
    Joined: Dec 18, 2006
    Posts: 9,665

    JeffB2
    Member
    from Phoenix,AZ

    I have a drivers side inner fender,send me an email and I can send you a picture.
     
  8. slim53
    Joined: Apr 24, 2005
    Posts: 399

    slim53
    Member

    I need the gl*** for the Speedo on my '54 (windshield side).

    Slim in Bloomington MN
     
  9. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    I will get the boxes down later tonight and get some pics up (hopefully). You guys can pick though whats there and see if you want anything. I'm pretty sure the speedo top is already spoken for by one of you guys, I will snap some shots of the switches I have, the tail light lenses, gauge cluster surround, and anything else that looks like it can be used. I can't use this stuff so I figure I'd see if anyone else could before it ends up in the trash.
     
  10. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    OK, so here's a few shots of the highlights of the boxes I got. Sorry the pics aren't the greatest, but I had to take em with my phone because I couldn't find my camera (wife has it hid somewhere). The working condition of all the switches is unknown, however I would ***ume they are working because the guy I got them from said he just switched to a different style knob and replaced all the switches while he was at it. I, however, have not hooked them up to verify thier working condition.

    First up is the tail lights. These are the lenses and buckets. Lenses are in good shape. Not sure if theres bulbs in em or not. Trim rimgs are a bit rusty, but would be good for a driver if you don't have any, or are goin for that look. Macs has the housings listed at $63.95 each and does not include the socket. I'd take $50 for both plus shipping.
    [​IMG]

    [​IMG]
     
  11. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next up is a head light switch WITH bezel. Unknown if working. Switch is black with a chrome bullet in the center. Macs has it listed for $52.95 for the switch and $19.95 for the knob. I'd take $25 plus shipping.

    GONE

    [​IMG]

    [​IMG]
     
  12. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next up, we have the gauge cluster surround. I have all 4 pieces for this and would prefer not to separate if I don't have to. There's the gauge surround, dash top, tinted plastic dash top insert, and bottom plate. Macs lists the dome for $31.95, but I can't seem to find the other pieces, so I'm gonna go out on a limb here and say $50 for all plus shipping. Again, or best offer.

    [​IMG]

    [​IMG]

    [​IMG]
     
  13. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a blower switch with wire. Unknown if working. Macs has it listed for $18.95 and that doesn't include the knob. I'd take $15 plus shipping.

    GONE

    [​IMG]

    [​IMG]
     
  14. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a cigar lighter. Unknown if working. Has broken knob, but I will throw in 3 extra knobs. Macs has it listed for $22. I'd take $10 plus shipping for all.

    [​IMG]

    [​IMG]
     
  15. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next, we have a See Clear washer fluid bag. Should clean up relatively nice. Macs has it listed for $32.95 without all the tubing. I'd take $15 plus shipping.

    GONE

    [​IMG]
     
  16. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Unfortunately, all I have for an ignition sswitch is this bezel. If you want it, I'll drop it in the mail to you. Just send me your address.

    GONE TO BAKER53

    [​IMG]
     
  17. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next up is 3 hood/trunk ornament bezels. Some very mild pitting, but very good for a driver or replacement if you need one. Macs has these listed at $50.95 each. I'd take $25 each plus shipping and I'll even throw in one of the faded out emblems for free! :p

    [​IMG]
     
  18. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a choke with cable and bezel. I can't find a listing in Macs, so how about $10 plus shipping.

    GONE

    [​IMG]

    [​IMG]
     
  19. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a turn signal lever with knob. $10 plus shipping.

    GONE

    [​IMG]
     
  20. baker53
    Joined: Jan 17, 2003
    Posts: 329

    baker53
    Member

    I sent you a PM on the Ignition Switch Bezel. Bill, Spring, TX
     
  21. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is 3 trim rings. Not really sure if these are for head lights or tail lights. Chrome seems to be in good shape. $20 plus shipping.

    [​IMG]
     
  22. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a misc bunch of light sockets. There are 6 of the larger ones, which I would guess would be for head lights, tail lights and turn signals. There are about a dozen of the smaller ones, which I would ***ume would be for the interior lights. If you want this, you pay only for the shipping and they're all yours. I will also throw in the 2 odd ball bezels shown if you want em. They look like radio knob bezels to me.

    GONE

    [​IMG]

    [​IMG]

    [​IMG]
     
  23. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Lastly, there's an ***ortment of hood latches. The big one doesn't look like it belongs on one of these cars, but I can't tell. $10 plus shipping for the whole lot.

    GONE

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  24. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Again, I'm sorry for the low quality of pictures. If you need better ones, just let me know and I will see what I can do for you. If you buy more than 1 item, I will do my best to combine shipping (as in for 1 low price).

    And all the listed prices above are or best offer. If you see something you like, but don't like the price, don't be afraid to shoot me an offer. I'm always open to consideration! Also open to trades as well!
     
  25. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    I found some more goodies! First is an oil filter canister. No top, needs cleaning. Make me an offer.

    GONE

    [​IMG]
     
  26. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Not really sure what this piece is. Looks like a chrome piece for the bottom of the seat. Chrome in good shape, only a couple small pits here and there. Make me an offer.

    [​IMG]
     
  27. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a pair of metal Auto Lite sea shell style horns. Give these babys a quick coat of paint and they're show ready! Macs has the plastic ones listed at $89.95 a pair. I'll take $50 plus shipping for these.

    [​IMG]
     
  28. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Next is a heater control with both cables AND light. Chrome and control levers look to be in good shape. Face of control looks good. Cables look decent, but not sure if they move freely or not. Macs has the cables listed at $20.95 each, but I can't seem to find the controls anywhere. I'll take $50 plus shipping for the whole lot.

    [​IMG]

    [​IMG]
     
  29. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Just a quick bump to the top to see if anyone still needs any of these parts. Make me an offer on any or all prices folks! I'm not dead set on any of them.
     
  30. firerod63
    Joined: May 11, 2010
    Posts: 38

    firerod63
    Member

    Seriously guys, don't be afraid to make me offers. I would hate to see this stuff just get thrown away when I know theres people out there that could use it.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.