6-8 deuces: let's see your 6x2, 8x2 setups!?

here is mine

 

Not mine, but I'm helping a buddy with his 32 Sedan.

 

Here is a different 8x2,

 

guess I never got around to posting a completed picture of my set up..



would love to have the motor back to set on an engine stand in the garage so I can look at it...

 

"Jalopykid, is that a Zip's riser? Would you like to sell it?"

Druss32, it is a zips waterpump riser. Its gonna work slick on the fordor so I'm gonna use it.

 

Hello all

We utilized four Weber IDA's on our 2009 Engine Masters Challenge early hemi. Don't know how to post the pix, so if someone can 'splain it to me, I'd appreciate it. Or, I could send the pix to someone and they could post it.

I'm in the middle of a Holley 8X2 manifold utilizing Holley 80583's (Keith Dorton HP series 2300's). Have the carburetors in hand, and the manifold and carburetor plate drawings almost ready to go to the water jet cutter. Working on how to configure the runners, might "bite the bullet" (way expensive) and have Tim Hogan fabricate some.

Danny

 

I'll take care of it for you Dan

 

My six other women.........Littleman

 

My Latest Setup .

 

here is my dragstar on a hemi, i kno old post, not the only thing on here that is old

 

Before I sold the car, I was using four of the 94's. Most of the time I was only using two. Way too much fuel for the little 283. And those power valves were a ***** to get sorted. They looked real cool though.
Not the best pic of the manifold but, you get the idea.

 

One of mine Gary

 

Here is a pic of mine rochester 97's

 

One of my Old setups.

 

to the left in photo is my 303 olds going in a 31 coupe

 

Here is our setup on your typical SBC.

 

Does anyone know were I can get another eight top? This one came off my friends car,it's a Scotty's it is on my brother's coupe. I'm getting ready to start a coupe for my friend and he wants an eight top, if anyone knows were i can get one please let me know.

 

I got this 6 top from a guy in the grocery store parking lot that was waiting by our coupe when I walked out from shopping. Said his dad had run it on a blown flat bottom drag boat back in the day and it had been hanging on his wall since his dad p***ed. He said he waited cause he thought the carbs I was running looked familiar to him.

So you never know when or where you will come across something.

Irony, it now hangs on my shop wall....waiting for me to do something with it.

Cheers

 

SPAM ALERT!

Anyone looking for a 4-71 carb adapter?

http://www.obrientruckers.com/ecom/product/244/2627/

Dennis

 

VERY, VERY cool eye-candy guys, I'm big time jealous!
The closest I ever got was a '65 Corvair Corsa with 4 carbs.

 

Mine

 

Here is my setup.

 

Built this 312 three deuce setup to run in 53 ford pickup but after selling the pickup to build another project, I sold this block to a buddy of mine.

 

my 392 when it was first rebuilt and all shiny and clean (5/2007). Crower style U-Fab manifold.

 

Just ran a couple of 50 mile loops to local car show and shake-down. Surprised that initial tune on carbs resulted in 15.3 mpg! Not bad if i do say so myself.

 

I've got a Chrysler hemi high-rise Edelbrock 6x2 with Holley 94s I could be talked out of.

 

The 6x2 setup we currently have running in Miss Taboo Offy manifold and handmade adapters to mount 2GC's instead of 94 or 97.

 

Say-why-and 8-671 in my 1931 Chrysler cm-6. This was one of 20 made in 1959. Eight 97s were a tight fit. The car ran great. Thousands of street miles and lots of p***es on this one.