Bad ass man...you should hold your head up doing what your doing at your age. Sent from my SM-G900V using The H.A.M.B. mobile app
Steering done. Gonna start on the flip front, pedals and a few other small things so that the body will ready too be taken off and primered. The frame will be final welded then aswell. Sent from my iPhone using H.A.M.B.
Yeah that is the block I’m using for mock up and have built aswell. I have a stock 302 too throw in while that ones being built but it’s gonna be a 331. Sent from my iPhone using H.A.M.B.
Making progress! More than some of us can say about our stuff lol Sent from my iPhone using The H.A.M.B. mobile app
We should both be embarrassed after seeing what Squirrel accomplished in 9-1/2 months Sent from my iPhone using H.A.M.B.
It’s not a whole lot of weight but I cut that main support that runs from the top too the bottom at the far rear of the fender Sent from my iPhone using H.A.M.B.
I’d love to see detailed pic or get more info on your DIY tilt front end. Sent from my iPhone using The H.A.M.B. mobile app
We will get you all the details when it’s finished. We haven’t exactly figured out how we want to hinge it. Hoping to steal some ideas at the fallout. I do believe for all steel this car is going to be light. Sent from my iPhone using H.A.M.B.
Got the door bars in place, made a head rest, and started on the brake and clutch pedal assembly. We cut a driveshaft loop in half for the pedal arms because we don’t have a tubing bender and it turned out well. Next is going too be making the linkage too the master cylinder and getting the front down bars and the rocker bars for the cage. Sent from my iPhone using H.A.M.B.
The cage is all in place ready too be final welded, the body will be off soon Sent from my iPhone using H.A.M.B.
Illinois, we’ll be doing some traveling too there races. Planning on making a few a year Sent from my iPhone using H.A.M.B.
Crazy kid. You won’t see me flopped on the floor welding unless I have to [emoji23] Sent from my iPhone using H.A.M.B.
Finished up the brake and clutch pedal linkage,might do some adjusting later but for now it’s done,got the master cylinder mounted, radiator mounted and did a bit rust repair over the weekend. Sent from my iPhone using H.A.M.B.
Spent the thanksgiving break patching rust holes and other metal work, very time consuming and no visual progress but did get the wheelie bars put on. Sent from my iPhone using H.A.M.B.
I have 100's of pictures of the metal work on mine. Countless hours. And you can't tell without a sharp eye, lol. But that crap needs done and done right. We know what you're going through. Now get back to work! I want to see this thing making passes.
The Jalopy Journal
