Just got it back from machine shop. Fluxed and found 2 cracks not detrimental and those were fixed Sleeved standard bore. New cam bearings installed. Comes with all parts that were removed, tip to stern. Crank is .020 mains, .010 rods under, just needs a polish but miced out great and even. To be ready for assembly, needs a valve seat grind, and a deck of the block. May need a minor polish on the crank but everything seems real good and the bearings were stellar that I removed with barely any wear etc. Same with rods, the bearings were great, and Id just swap pistons. I am selling it for what I have in it. All work done by Teds Machine in Conroe Tx. Has a older petronix in stock distributor. Here it is before being stripped down to see if it was any good. Located in 77373, can help load here, or can deliver to Prewar Pileup in Tulsa Ok. 6/10/23 or cities within a certain distance of my path from Houston to Tulsa for a additional fee.
Bump, comes with a set of standard bore pistons now. New PRICE 1500. for the motor, With the new valves, and the set of pistons etc and all parts off it shown in first photo. I also have a Mallory Dizzy for additional 300 bucks. I also have a 39 generator in a rebuilders box, NOS for an additional 200 Can deliver within 300 miles of 77373 for a fee or ship on your dime.
The Jalopy Journal
