Technical All exhaust pushrods bent?!

bobss396 · Aug 28, 2019

Desoto291Hemi said: ↑

Tell your friend not to beat himself up too bad,,,mistakes happen sometimes.
Where many of us have done this so much it is old hat to us,,,,seems elementary.
But to some guys that are a little less experienced,,,,especially with a multi key sprocket like that ,,,it could happen.
Always,,always,,,,gently cycle it through the motions and feel for any binding.
The best way if you plan to use a multi key sprocket is to take a paint marker and mark the key you intend to use,,,,the key slot and the corresponding O mark for that slot.
I am getting older and it is easier to do while I have it up close in my hands before I put it on the crank.
Tommy
Click to expand...

That's what SHE said...

2OLD2FAST · Aug 28, 2019

2OLD2FAST said: ↑

Crank for at 12 , cam for at 6 IS dot to dot .....
Click to expand...

I apologise , I did not proof read the post , crank dot at 12 , cam dot at 6 IS dot to dot is what I meant to say. I 'm on a tablet ,it seems to write whatever it thinks I'm trying to say , again, sorry !

Log in or Sign up

Technical All exhaust pushrods bent?!

bobss396
Member

from Long Island, NY

2OLD2FAST
Member

from illinois

Share This Page

Archive

Atomic Industry

Support

Subscribe

Log in or Sign up

Technical All exhaust pushrods bent?!

bobss396 Member from Long Island, NY

2OLD2FAST Member from illinois

Share This Page

Useful Searches

Archive

Atomic Industry

Support

Subscribe

bobss396
Member

from Long Island, NY

2OLD2FAST
Member

from illinois