I'm just about to start carving one out of wood so I can cast some, But I need more pix of them. A little help would be thanked greatly. sorry if I hijacked your post 1 low.
[ QUOTE ] I'm looking for one or someway to make it. Any idea's? [/ QUOTE ] Uhh, maybe get some brass knuckles, tap & thread the bottom, and screw them onto a shifter? Are you really a machinist?
you used to be able to buy them at army/navy surplus store, and gun shows here in oklahoma. i doubt arkansas is any different.
[ QUOTE ] [ QUOTE ] I'm looking for one or someway to make it. Any idea's? [/ QUOTE ] Uhh, maybe get some brass knuckles, tap & thread the bottom, and screw them onto a shifter? Are you really a machinist? [/ QUOTE ] There hard as hell to find here. Being that they are illegal. I have to change my shifter too.....thanks guys.
27kid; buy these and cast them: unless you just like whittlin' http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2984639793&category=3204
[ QUOTE ] http://www.donrearic.com/brassknuckles.html [/ QUOTE ] The rest of dons site is pretty decent too!
[ QUOTE ] There hard as hell to find here. Being that they are illegal. I have to change my shifter too.....thanks guys. [/ QUOTE ] They are sold legally as paperweights. Do an internet search of "brass paperweights" or "brass knuckle paperweights" and you should be able to find some.
here is an easy way to do it , use one of these knife handles , they cost about 20 bucks , put a clip on the end of the shaft with a safety wire , in case you need to use it. LINK YO KNUCKLE KNIFE SITE Also makes a great kickstart peddle for a motorcycle.
[ QUOTE ] here is an easy way to do it , use one of these knife handles , they cost about 20 bucks , put a clip on the end of the shaft with a safety wire , in case you need to use it. LINK YO KNUCKLE KNIFE SITE Also makes a great kickstart peddle for a motorcycle. [/ QUOTE ] That's what I'm talking about! Thanks man
[quote There hard as hell to find here. Being that they are illegal. I have to change my shifter too.....thanks guys. [/ QUOTE ] Not too hard to find on ebay . They are only illegal if you punch someone with them and get caought , or you get frisked and they are in your back pocket . Otherwise as a shifter handle you should be safe . Brass Knuckles on EBAY
Did she say nipples... are you guys dead or just that much of car freaks that you only hear cartalk? heheh damn! I am making a nipple knuckle for her right now. haha! bp
I think Burndup is a guy And since only 10%-20% of Hambers are gay (not that there is anything wrong with that) and most of those are in the closet still. Thus the lack of interest in Burndups nipples. So give it time and maybe some of the gay hambers will comment.
Welll that totally explains the whole deal... I just quit makin the nipple knuckles haha... not gay here... thought there was a lady in distress. haha thanks for the insight! Back to hotrods men nothin to see hare... bp
i have some really cool antique ones that i was gonna make a shift knob out of.....untill i saw that everyone is doing that now...maybe i'll just go back to hitting people with them
[ QUOTE ] And since only 10%-20% of Hambers are gay (not that there is anything wrong with that) and most of those are in the closet still. [/ QUOTE ] Some states are gayer than others. GMB local 300.
just go to an army/navy surplus shop and get a set of brass knuckles that're labled as a "paper weight".i got a set and hung em up on my wall. ~creepy
Around here they are "belt buckles" they have a little brass pin that screws in between the 2 center finger holes to put through the hole in your belt... of course they come "some assembly required"!
[ QUOTE ] 27kid; buy these and cast them: unless you just like whittlin' http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2984639793&category=3204 [/ QUOTE ] Just a heads up. Some of the ones advertised on ebay as plastic are actually aluminum. I picked up one a few months ago to convert into a shift knob myself. When it got here something seemed, a bit off. After a quick scratch and polish my theory was proven. Although they are pretty thin. It not enough to fit over the shifter.
you muthafuggas, you blew up the spot! I was gonna use the trench knife knuckle handle for my 50 chevy - with 3 on the tree it will look like you are trying to punch the window!
Yes, I was in fact kidding... I'm just very interested lately on how the hell large pieces of metal can stay attached to female glandular tissue...
Does anyone have a dummy grenade lying around? I want to make a shifter outa one as well. They are against the law here in Cali so the army surplus does not have em. bp
The Jalopy Journal
