Calling all Metal-men - HAMB Chop '06 - So. Cal.

Yep, you read it right.

I got permission from the man up stairs, (Thanks Ryan) so lets go!

I would like to request some HAMB'r metal smith's, grinders, wipers or a few "stand arounder" observers to come together to help me chop my 50 Ford. I dont want anything too radical, still unsure how much to drop the lid, so recomendations are welcome. (anyone have a picture of Weesner's Shoebox?) Ill post some picts of some examples that I have been liking.

I have all the necessary tools, planishing hammer, metal and parts needed for this upcoming event. (except an english wheel.)

I will be providing lunch and dinner (BBQ), drinks and any other necessity items to keep this eventful.

I also have on the table (working on design and submitting for approval) a plan to print up a large sum of T-shirts and other goodies for all that come down. Considering the price of each to print, I may be looking to print from 25 - 40 shirts if needed.

To give back and a Huge "Thank You"... for all that show up; I will give away (pull a name from the Hat) something cool to one or two persons away for thier rides. I have not decided what that will be; but I dont want anyone to think I am looking for a free hand out. More than likely, it will be one of the following: "Gift Certificate" for one or two custom mods on your ride (french, shave, nose, deck), Paint your roof with some pearl, flakes or color of your choice that I have and/or re-wire of your whole car uusing a 6-post fuse block.

The tentative date is Saturday, 11-18-06.

If that weekend is a bad one, then the only time after would be Saturday, 12-2-06.

I want to invite everyone that can make it and help out.

Please PM me if you know for sure you can make it and Ill forward my address and phone number.

Its been a while since one of these have gone down. Lets make it a good one.

If you have any questions, throw them down and Ill try to answer all of them. Here is a picture of the victim that I want to improve.

 

Here are a few example cars that I like.

 

anyone want to carpool from Nor-Cal?
i'll be there,if i have to hitchhike...

 

XXL T-shirt please.

 

This is cool!!! It has been a long time, has any of the previous host cars been finished??

I hope this goes well. I plan on doing this to a shoebox , if I ever get one!


jeff

 

George is not allowed to show butt crack, I got work to do!

 

Sorry I couldn't meet up with you today Norm.... Sick as a dog. Count me in for any bitch work needed.....

 

I have none of the prerequisites noted in your thread, but It would be awesome to have cheerleaders (support). I can also cook up a mean carne asada.

 

Lets do it, I'll be there with bells on.

Better make some XXL shirts for us "big boned" guys that will be there.

 

I could make it on either day.
Based on lessons learned from the last HAMB Chop, I offer up the following considerations:
- an air compressor of sufficient size to handle simultaneous use of a couple of die grinders/cutters
- a stack of SATA cutting disks
- extra gas for the MIG (I have a MIG that I could bring if needed)
- a back window that will fit your new top design
- non-alcoholic beer for those of us who work til the end
- car must be stripped of all glass and interior trim, seats, etc. beforehand.

Not sure what you set up is but the more room the better, the first couple of HAMB Chops were hosted at a commercial garage...I guess it could be done in less space but more is always better.
If I missed anything I'm sure that Jason will chime in...it will be good to revive the HAMB Chop especially since we can forgo all the politics of picking a "deserving" victim...er, future custom car owner.

 

i can lend a hand....um...lifting the top off...count me in!

 

I'd love to do something like this on the East coast. maybe in the spring I'll chop my truck or i'll have bought another car to cut. it's becoming an issue with me, i can't stop buying cars.

 

Chop50 Ford....Why do you want to do it like Weezie's, I'm sorry but that top isn't the greatest, look at tops like Job's Shoebox. Weesners is cool don't get me wrong, but the porportions are off quite a bit, this is a look that would have been done decades ago, you can do better than that...Now where exactly are you located? If I have time, I will attend and help give your top a makeover with the rest of these dudes.

 

I have two jobs and a new baby . . so it's up in the air until the last minute. . .but I'll be there if I can. No door prizes/incentives required. Should I bring my welder (gas mig 220v) or any tools?

 

I would love to be there. Let me know what I can bring. I have a friend at Rutlandtool.com and can get anything (within reason) we need i.e. SATA cutting discs, etc.

 

He said victim. I like it. Maybe that will be the new name for the 'box. "The Victim"

#1 - Consider it done....you say 12 a good number? or a pack or two?
#2 - I got a mig and a Tig machine...both will have full bottles
#3 - All I have is a stock window...that will work for me unless someone has a cool one up for sale? What would be cool is a '49 Mercury 3-piece rear window. But not sure on the fitment.
#4 - Non-alcoholic beer....what type do you drink? Ill have it.
#5 - Car will be stripped down to the bare body.

AS for Weezner's shoebox, its merely for example. Basically, I really want it to look traditional, clean and proportional too. Im up for any suggestion. Got any pictures of Job's shoebox? The black one above looks to be one my favorite. 5051's and Bad Bobs 'boxes are cool too.

As for those who want to cheer and cook...bring it. All are invited. I have a large BBQ grill and smoker that can be used.

As for space...I dont have a commercial place but mine has sufficient room...or rather, Ill make sure there is. Parking may be a problem, but no worries, Hot rods can be put up at the house and newbie cars on the street.

Example of tooling that I have:

Air:
Couple die grinders
Angle grinders and plenty of 36 grit roll-oc disks
Body saw
grinding wheel
Sheetmetal cutter
Planishing Hammer w/ lots of dies.
Staple gun

Electric: got both 110v and 220v hook ups
Couple angle grinders
Sawzall
Chop saw
Sheetmetal cutter
High speed buffer w/ shrinking disk

Other:
Shrinker/stretcher
42" Shear
48" Roller (at buddies house, but can get if needed)
48" Brake (at buddies house, but can get if needed)
Beverly shear
PLenty of hammer and dollies of different sorts
Bulls eye pick (heh, never used it, but I got it.)
Lead

I hope Im covered.

My address:

33938 Avenue I, Back House
Yucaipa, Ca 92399

 

we did the first HAMB chop in my garage... we'll be fine at your house.

stock rear window will be ok too.

 

This is the way they are supposed to happen.
I like your attitude........

 

Hey Norm,

You gonna go with a vertical or canted B-post?
Do ya have extra sheet for fabbin filler pieces, yeah, you can cut
them from scrap, but fresh makes for a cleaner job.

Swankey Devils C.C.

 

Count me in Norm. Anything to help ya out. You do alot for others so I believe it is Karma for this to happen for you now. KNUX!

 

I have a 1/2 sheet of 20 ga. metal.

I will pickup another full sheet....20 ga. or 18 ga. ?

Slanted or upright...I like the upright look.

Any pinstripers coming?

 

I could ask Scratch to come over and lay some lines down on it. I will get back to ya on that!

 

Norm. Check yer pm's!!!!!!!!!!!!! KNUX!

 

Norm give me something to do. I want to feel needed.

 

PM me when and where and me and 5051 will be there. I'll bring my sons '49 shoebox.

 

I was at Johnson's Garage all day today, and Killer said he is gonna grab me by the ear and drag me there. So, it looks like you will have one more cheerleader/grunt, I don't cook so you're SOL on that one.

 

are you going to auction the car off later?lol......

no really.i want to swing by.so,count me in for a couple hours..

weesner should be on here somewhere...he cut that car with a torch.

i hope you get it all the interior out and braces in.

hard top?

 

Norm, would love to come and help. I have plenty of tools, let me know if you need something. I also have a 3 piece rear glass out of a 52 Lincoln hardtop. Its still in the car, so let me know if you want it and I'll cut it out real large. Have you firmed up a date yet? I need to get out of work. Mike.

 

Im banking on November 18, 2006.

Will that work for everyone?

Auction the car; now that's funny Skratch.

5051, come for moral support, bring some SATA cutting wheels. Cheerleading and cooking is important too. Hell, just hang out, watch, learn and have fun....that's what its supposed to be about.

Cornernfool, I wouldn't know what to ask you to bring...bring what you can...if not bring some food.

Thanks for the cool support thus far; with everyone so far...Its going to be a blast.

 

I will be there if work and my son allow. I live in orange and will carpool with somebody. I can bring a welder and all that happy horseshit if you need it. Jared