Hey guys, I have a Chevy 235, possibly a 261, not real sure about these little engines, but was told its possibly a 261 .. It has had all the machine work done, and has all the parts to put it together, except, the cam and lifters. Have had the following done. Rotating ***embly was balanced. New valves,as needed, new guides and springs, head was decked, and valve job done, head is ready to bolt on. Crank was ground, Block was magnafluxed, decked, and bored and honed, cam bearings put in. Rods done. I have new pistons, rings, and new rod and crank bearings in the box's . Have new water and oil pumps, complete gasket kit New timing gears.. Have flywheel, and new clutch disk and pressure plate, and throw out bearing . Good, inspected and resealed transmission .. All this engine needs is a cam and lifters and its ready to build. Id take 1500 for everything ..OBO .. Have right at 1000 in the parts and machine work ..
The Jalopy Journal
