Register now to get rid of these ads!

Customs deal or no deal on 63.5

Discussion in 'The Hokey Ass Message Board' started by ahshoe, Oct 3, 2017.

  1. ahshoe
    Joined: Sep 12, 2012
    Posts: 1,055

    ahshoe
    Member

    I have a chance to pick up another project( like I need one).I believe it is a great deal but not sure about pulling the plug. It is a 63.5 Galaxie. No motor,trans.,interior except the dash and front seat frame. It will need both lower quarters,lower fender patches,all gl*** but 1 quarter window ,all trim,wiring, hood,grill taillights,etc. Has excellent trunk floor,floor boards,and roof. I think the frame is wlso good. Was a 4 speed car ,but no pedals...no ***le. Was a Z code. Now here is the, I think ,good news....$500. Should I get it? Talk me out of it will you lol.
     
  2. flatford39
    Joined: Dec 3, 2006
    Posts: 2,799

    flatford39
    Member

    Any paperwork with it???
     
  3. ahshoe
    Joined: Sep 12, 2012
    Posts: 1,055

    ahshoe
    Member

    No paperwork but I can get a ***le with the receipt in my State.
     
  4. clunker
    Joined: Feb 23, 2011
    Posts: 1,609

    clunker
    Member
    from Boston MA

    No question, without a doubt get it. Without projects we wither and die.


    Sent from my iPhone using H.A.M.B.
     
  5. Sounds like a maybe decent re-body donor.... but as a project would be a steep hill.
     
    Hnstray likes this.
  6. BJR
    Joined: Mar 11, 2005
    Posts: 11,369

    BJR
    Member

    P*** it up and finish the projects you already have. Sounds like a money pit.
     
  7. Mr48chev
    Joined: Dec 28, 2007
    Posts: 36,046

    Mr48chev
    ALLIANCE MEMBER

    I like 63-1/2 Galaxies but unless you are going to build it as a drag car it is going to get real spendy real quick finding the right pieces to put the interior and other trim back together. I'd first figure what that 500 bucks would do on one of the projects I have now.
     
    lothiandon1940 likes this.
  8. lothiandon1940
    Joined: May 24, 2007
    Posts: 32,488

    lothiandon1940
    Member

    .............................Emphasis here on the word was.:D:rolleyes:
     
  9. belair
    Joined: Jul 10, 2006
    Posts: 9,036

    belair
    Member

    Save your money.
     
    lothiandon1940 likes this.
  10. Hnstray
    Joined: Aug 23, 2009
    Posts: 12,357

    Hnstray
    Member
    from Quincy, IL

    It is a cadaver donor, not a project. Ask yourself, "how will my life be better if I buy this hulk?".

    Ray
     
    metlmunchr and lothiandon1940 like this.
  11. Rocky
    Joined: Mar 3, 2001
    Posts: 17,630

    Rocky
    Classified Editor

    NOOOOOOOOOOOOOOOOOOO
     
    scrapiron and lothiandon1940 like this.
  12. corncobcoupe
    Joined: May 26, 2001
    Posts: 8,883

    corncobcoupe
    SUPER MODERATOR
    Staff Member

    NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
     
    upspirate and lothiandon1940 like this.
  13. KoolKat-57
    Joined: Feb 22, 2010
    Posts: 3,092

    KoolKat-57
    Member
    from Dublin, OH

  14. bobss396
    Joined: Aug 27, 2008
    Posts: 18,754

    bobss396
    Member

    My '59 Ford was missing a lot of interior pieces and all the trim. Which I tracked down, to the tune of $2200 or more over the cost of the car.
     
  15. If you are contemplating building a vintage NASCAR clone, that may be a viable choice.
     
    lothiandon1940 likes this.
  16. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 34,098

    Jalopy Joker
    Member

    send me the $500 and I will keep it for you until the fever p***es
     
  17. LM14
    Joined: Dec 18, 2009
    Posts: 1,936

    LM14
    Member Emeritus
    from Iowa

    Last time I checked into a car without a ***le it was a h***le. IDOT inspection, bonded ***le 3 years, pay for ***le history search.....have things changed?
    SPark
     
  18. impala59
    Joined: Jun 21, 2010
    Posts: 590

    impala59
    Member
    from vallejo,ca

    Sounds like it belongs to a demo derby guy. There still hoarding them early 60"s fords.
     
  19. southcross2631
    Joined: Jan 20, 2013
    Posts: 4,412

    southcross2631
    Member

    Sounds like a good start to a nostalgic super stock. the good news is you don't need a clutch pedal,just run an automatic.
    Don't need a ***le either. Just a bill of sale.
    Go for it ! Loved my 63 1/2 406 tri power super stock car.
    The best way to make a small fortune racing is to start with a large one.
     
  20. Malcolm
    Joined: Feb 9, 2006
    Posts: 8,179

    Malcolm
    Member
    from Nebraska

    I'd p*** on it. Part of the reason it's cheap is that you'll spend $500 many times over trying to make it a somewhat complete, running/driving car.
     
  21. s55mercury66
    Joined: Jul 6, 2009
    Posts: 4,367

    s55mercury66
    Member
    from SW Wyoming

    Sounds like it was someones parts car, and they already unbolted 90% of the good parts. I have a '64 XL 4speed car here in the same shape. No ***le, but the roof is still there. If you really want it, be prepared to spend a lot of dollars to get it back together.
     
  22. sunbeam
    Joined: Oct 22, 2010
    Posts: 6,396

    sunbeam
    Member

    Cheap cars are usally not that when finished. Look at it this way someone pulled the stuff out of the car because it was the cheapest way for him to go.
     
  23. 56don
    Joined: Dec 11, 2005
    Posts: 10,333

    56don
    Member

    I love 63-64 Galaxies but I would p*** on that. Its just a parts car and other than a trunk floor which rusts out on most of them, it sounds like it doesn't have many parts, in fact, has already been a parts car, not a project. Z code is desirable, but isn't all that rare enough to sink bundles of money into it. My 2¢
     
    Hnstray likes this.
  24. rjones35
    Joined: May 12, 2008
    Posts: 865

    rjones35
    Member

    I think keep shopping.
     
  25. bobss396
    Joined: Aug 27, 2008
    Posts: 18,754

    bobss396
    Member

    The good floors and trunk are a plus. Most of there are Flintstone cars by now. If you have the patience to track down what's not there it may be a good deal. A complete car with the rust you describe might go for $2500 to $3000.

    My '59 Ford was part of a divorce settlement... sold by the wife to me through a 3rd party. Somewhere these is a pile of parts that she/I didn't get.
     
  26. alchemy
    Joined: Sep 27, 2002
    Posts: 22,774

    alchemy
    Member

    No, things haven't changed here in Iowa. All you are going to get with a bill of sale is a bunch of blank forms from the clerk, and instructions on how to start the bonding process (if you are lucky to find a clerk who knows what they are doing).
     
  27. southcross2631
    Joined: Jan 20, 2013
    Posts: 4,412

    southcross2631
    Member

    You could always get one of your friends register that live in a non ***le state to register it there and then sell it to you. Have done that before.
    I went through that with a Morris Minor. Sold it to my buddy in Ga. He got a tag and then turned around and sold it back to me with the registration and a bill of sale . Went to the DMV in Tn and they issued me a new Tn. ***le. The car had been off the road for 20 years and they had dropped the car from the system and would not recognize my old Tn. ***le that I showed them so I had to do something.
    Just had to get a cop in Ga. to run the numbers to see it wasn't stolen.
    I grew up in northern Michigan where rust never sleeps and saving rare old cars was harder to do.
    I think people are getting spoiled. My shop survives on repairing rusty iron. Even down here in Florida you would think they would be rust free ,but not so. Many snow birds came down and brought cars and the salt air in the dew settles on these cars and gives them a salt bath.
    If you feel it is worth fixing, then fix it.
     
  28. lothianwilly71
    Joined: Apr 6, 2008
    Posts: 2,925

    lothianwilly71
    Member

    Could be a good parts car for some one.
     
  29. chargin03
    Joined: Jan 8, 2013
    Posts: 518

    chargin03
    Member

  30. pit-hole.jpg there you are..........
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.