Register now to get rid of these ads!

Dumbest thing an "EXPERT" has said about your ride?

Discussion in 'The Hokey Ass Message Board' started by SOHC427, May 8, 2009.

Thread Status:
Not open for further replies.
  1. melsfine39
    Joined: Apr 24, 2009
    Posts: 235

    melsfine39
    Member

    I had my 39 Chevy at a show when two small kids climbed on the running boards and hung on the door to look at the inside, I didn't yell, but asked them not to hang on the car and please step off the running boards,The mother than said to me rather nasty "Whats the problem its just an OLD CAR!":mad:
    I have had people come up to my car at shows and open the doors or the hood and look at me like I have a problem when I say :eek: "HEY don't do that!"
    Mel
     
  2. D-fens
    Joined: Aug 30, 2007
    Posts: 367

    D-fens
    Member
    from Huntsville

    Here's where the new guy gets to be Mr. Popularity.

    How about some of the stupid shit you get from the gold chain smoothie billet street rod crew? I used to try talking to those guys, before I learned most of them don't know dick about their own cars.

    "Yeah son, it's all real steel, one of only "X" left in the world"
    (Right, Pops. Guess you went to a lot of trouble to make it look like a glass body on the inside)

    "I've got over $100,000 in this car"
    (did you get your money's worth?")

    "Gonna be featured in Hot Rod magazine next month"
    (Car disappeared without a trace)

    "Boyd Coddington wanted to build it for me, but I told him I could do better myself"
    (Wow)

    "I built it myself"
    (Uh, yeah you did)

    Then there's the guys who got some semi-desirable car rotting away in the yard / garage / barn / whatever - been there for 10 or 15 years.

    Q: What're you gonna do with that 'XX Xxxxx? Wanna sell it?
    A: Naw, we gonna fix it up!!!
    (Better get on it, brother. You ain't getting any younger)
     
  3. RichG
    Joined: Dec 8, 2008
    Posts: 3,919

    RichG
    Member

    ...I hate to bring this up, but didn't you, ah, miss the spaceship already?:D
     
  4. trad27
    Joined: Apr 22, 2009
    Posts: 1,217

    trad27
    Member

    i know its not american, but when i had my chopped volkswagen people always asked me if i had a set of paddle tires and if i ever took it to the sand dunes. ITS FUCKIN TWO INCHES OFF THE GROUND.



    [​IMG]
     
  5. 50Fraud
    Joined: May 6, 2001
    Posts: 10,099

    50Fraud
    Member Emeritus

    "I just love Studebakers!"

    ...and, of course, "I used to have one just like that."

    [​IMG]
     
  6. snelson57
    Joined: Jun 3, 2008
    Posts: 544

    snelson57
    Member

    Wow - neat car. They should have built it.....

    [​IMG][/QUOTE]
     
  7. 296ardun
    Joined: Feb 11, 2009
    Posts: 4,698

    296ardun
    Member

    In parking lot at Blair's Speed Shop, 1962

    "So what year Chrysler is that?"
    "It's not a Chrysler, it's a flathead with Ardun heads"
    "What?"
    "Ardun heads, the guy who inspired the Corvette designed and built them"
    "You wiseass kid, don't try to bullshit me!"
    walks away
     
  8. Silhouettes 57
    Joined: Dec 9, 2006
    Posts: 2,791

    Silhouettes 57
    Member

    While working on my '40 Chevy P/U one day.
    Me: Hey! Put your foot on the brake pedel so I can break lose the lug nuts on the raised front wheels.
    Buddy: OK.
    Another buddy: Just put the emergency brake on.
    Me & Buddy: Laugh!!!
    Another buddy: You don't need to hold the brake pedel if you use the E brake.
    Me & Buddy: Laugh again, real hard this time because we think Another buddy is kidding!
    Another buddy: Insist all we need to do is use the E brake and goes to apply it but to his surprise the e brake does not hold the front brakes. His quote "if it wasn't a rod it would have worked"!
    It's a good source of laughter still to this day for us.
     
  9. 50Fraud
    Joined: May 6, 2001
    Posts: 10,099

    50Fraud
    Member Emeritus

    Thanks, that's what I thought too.
     
  10. 61TBird
    Joined: Mar 16, 2008
    Posts: 2,640

    61TBird
    Member

    nice "Dune Buggy".....:D
     
  11. Dynaflash_8
    Joined: Sep 24, 2008
    Posts: 3,038

    Dynaflash_8
    Member
    from Auburn WA

    I had someone yell at me when i was gettin in my buick at a show

    " dont slam the damn door, it aint a chevy!"
     
  12. VonKool13
    Joined: Feb 16, 2008
    Posts: 1,039

    VonKool13
    Member

    A smart guy told me, "You ought to put a '59 Ford front-end on your Edsel!"
     
  13. manyolcars
    Joined: Mar 30, 2001
    Posts: 9,363

    manyolcars

    I want the Edsel front sheetmetal for my 59 Ford!
     
  14. Motorbreath
    Joined: Nov 14, 2006
    Posts: 539

    Motorbreath
    Member


    no, this is a deuce coupe, i was told so by an expert. :D
    he must know what he was talking about, he did have a late 80's t bird with neon in the hood scoop.
     
  15. chickenwire
    Joined: Oct 17, 2006
    Posts: 275

    chickenwire
    Member
    from New Jersey

    Just last week a guy and his buddy were looking at my motor as I was standing close by and heard them saying how nice the Caddy valve covers fit on the 350 Chevy! Um, it is a Caddy motor!
    And my favorites are "nice rat rod" and "why do have those pinstripes on the car before you painted it"!
     
  16. flatheadgary
    Joined: Jul 17, 2007
    Posts: 1,040

    flatheadgary
    Member
    from boron,ca

    i had built a t bucket once and took it to an alignment shop. the expert meckanick told me it couldn't be aligned because there was to much backyard building and not enough real engineering with the front end. it was just a regular dropped axle.
    when it comes to stupid questions you should drive a henry j gasser like me.
    how fast is it? that must be hard to drive with that straight axle.
    what is it? studebacker, vw, volvo, ford, chevy,datsun, mustang you name it i have been asked it.
    it would take a whole page to tell it all.
     
  17. RayMiller
    Joined: Aug 9, 2005
    Posts: 462

    RayMiller
    Member

    is that a 57' camaro? yeeeaaah???
     
  18. Retrorod
    Joined: Jan 25, 2006
    Posts: 2,034

    Retrorod
    Member

    Every time I'm anywhere with my '35 tudor slantback I get "....nice Vicky!!". Quite often I hear "is that a Plymouth????". They always think it's a Plymouth, I haven't begun to figure that one out yet.

    At Bob's Big Boy one Friday night a guy says to his buddy..." this is a '37 because it doesn't have the door hinges sticking out". ( I put hidden hinges on it 5 years ago)
     
  19. merc-o-madness
    Joined: Aug 23, 2004
    Posts: 1,544

    merc-o-madness
    Member

    i had some one mistaken my 54 mercury for a mustang...
     
  20. Silhouettes 57
    Joined: Dec 9, 2006
    Posts: 2,791

    Silhouettes 57
    Member

    Overheard a guy while looking at my '60 Thunderbird Coupe tell his friend "that has one of those tops that fold down into the trunk"!!!
    Could be an honest mistake....maybe?
     
  21. zman
    Joined: Apr 2, 2001
    Posts: 16,775

    zman
    Member
    from Garner, NC

    I found out this weekend that the Jaguar wire wheels on my Buick are in reality Lincoln wires. Wow, I'm glad I was told, I would have never known. I had fun standing between my car and Caddyman65's Rivullac and hearing the talk.

    [​IMG]
     
  22. onlychevrolets
    Joined: Jan 23, 2006
    Posts: 2,307

    onlychevrolets
    Member

    I agree, I have a buddy with a 50 "shoebox" with a 440 mopar in it. He didn't do the swap but its still a cool car.
     
  23. belair
    Joined: Jul 10, 2006
    Posts: 9,020

    belair
    Member

    Now that's a pair to draw to!
     
  24. onlychevrolets
    Joined: Jan 23, 2006
    Posts: 2,307

    onlychevrolets
    Member

    I had a kid open my car and get in , he started yanking the shifter and turning the wheel. I walked over and said get out of my car, the parents where just standing there watching? WTF? In my childhood days if I had done something like that my dad would have beat my ass in front of GOD and everybody! This "NEW" style of teaching children how to act don't f--ing work. Whoop that ass....worked for me!
     
  25. white64
    Joined: Sep 15, 2008
    Posts: 680

    white64
    Member
    from Maine

    ok.. In defense of those who "know" no better.. we all have our areas of expertise'. Some may have their expertise in old cars, some in milking cows, some in plumbing, some in computers, some in hardware, some in software, some in DOS, some in Oracle, and some may still be looking for it.
    I guess the point is we aren't born knowing what a Duece coupe is, or an external join between databases by a primary key.
    It's easy to sit back and laugh at someone, but it's 100 times more fun to teach someone about something that interests them (or they wouldn't have said "stooopid" crap in the first place).
    I'm sure there have been times when I have been the statue and times when I've been the pigeon.....
     
  26. onlychevrolets
    Joined: Jan 23, 2006
    Posts: 2,307

    onlychevrolets
    Member

    White64, I see what your saying , this is what my dad told me when I was young, " stand there and make them think your stupid, instead of opening your mouth and letting them know you are" gee dad......that really helped me . hahaha
     
  27. George
    Joined: Jan 1, 2005
    Posts: 7,823

    George
    Member

    Along those lines....The people are divided up between "car" & "non car" people. The non car people, like the lady who said "It's just an old car". Are the ones who'll support scapping bills & other stuff to "Save the world" or "reduce dependence on foriegn oil". Us car people need to stick together regardless of intrests, Track T, S10, or dusters. As someone once said, either we hang together, or we'll all hang seperatly. Do we want to be driving this?
     
  28. onlychevrolets
    Joined: Jan 23, 2006
    Posts: 2,307

    onlychevrolets
    Member

    I don't think its so bad, take about 5 inches out of the top, weld on some 59 Cadi fins , and drop the axel a few inches....oh hell never mind it is a POS.
     
  29. MIKE-3137
    Joined: Feb 19, 2003
    Posts: 1,578

    MIKE-3137
    Member

    Guy standing next to my old 37 Ford slantback sedan says "so this is the roadster you're building, wow!" ahh nope..sometimes it aint even worth the effort to explain.
     
  30. must be a southern thang , that was one of my momma's favorite sayings!! and a good ass whoopin in front of GOD and everybody was one you would never forget!!:eek:
     
Thread Status:
Not open for further replies.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.