The Jalopy JournalFeatured Threads Archive
-
Technical Enlarging SBC Combustion Chambers?
In my quest to find a short block to my liking, what I have come across is the ZZ4/6 from GM. It’s just a rotating assembly, no cam, etc, but a new block, forged crank, hyperuetic flat top... -
1953 DeSoto 53 De Soto
Have to part with the DeSoto. Was going to do the stereotypical pull the running 276 HEMI out of it and put it in a Model A one day but due to my current situation and a lack of ambition that's... -
Projects Finally throwing the blankets off
Don't know how many of you saw the '64 El Camino custom I got back on the road for a widowed member of our car club, but finally delivered it back to her today. Even more interesting than the Elco... -
1932 Ford Five Window Coupe
***SOLD***
Henry steel 1932 Ford Five window Coupe. Been sitting in storage for 50+ years. Original sheet metal. Cowl Vent, and Roof Insert still intact. Original glass in amazing shape. All... -
History My Grandfather's 32 Roadster, A True 50's Hot Rod
Some of you may have seen my post on the Roadsters Only page on Facebook about my grandfathers roadster. It was suggested that I go to the HAMB to share this cars story and our progress as we get... -
Projects Am I crazy for wanting to build a banger?
Okay, let me preface this with "this isn't a build thread" (that will come later). This is more of a feeler discussion about a new project.
So... here's a little taste of what I want my... -
Features HOT ROD CHRISTMAS
Ho! Ho! Ho!
Merry Christmas, Happy Christmas, Seasons Greetings, Feliz Navidad, Happy Hanukkah, Happy Ramadan & Kwanzaa, Happy Holidays or whatever you call it..
Get your Southern Redneck... -
1940 Pontiac coupe
I have a 1940 pontiac coupe I’m looking to sell . The car is really solid and would be a good start to a rod or a custom . Has all the hard to find trim as well . Has 6cylinder which does t appear... -
Art & Inspiration Friday Art Show
Test n tune and Launch from a snow bank....
Post up your work...
-
Technical Inconsistent oil pressure
I have been driving my model A with a 54 331 hemi since 2019 on average 6 months out of the year. Last year I notice my oil pressure gauge reads 50-60psi on initial start up then after driving for... -
Technical I gave them a chance (3 fuel pumps later)
This goes all the way back to when I engine swapped my girl friends 56 210 Chevy from a 235 to a 283. I wanted things to look as near stock so I went with a (original looking) stock replacement... -
Technical NO LEGROOM
I have a '34 Ford pickup that was built for dwarfs. No legroom. I'm an old guy and tried bomber seats but no bueno. I'm sure others have had this problem. I've searched everywhere but most seats... -
Hot Rods Torque wrench
Hi, need to do a job that requires 150 ft. lbs. of torque. Not sure if I trust my old torque wrench. Anybody have a good brand to purchase ? -
1946 Ford Convertible ****SOLD****
****FOR SALE**** 1946 Ford convertible Super deluxe. Car is 99% complete, Nice original sheet metal with good gaps. A few small holes in trunk floor and driver side front floor. Doors have never... -
1932 ford roadster
1932 ford roadster -
Projects Building my first Traditional hot rod Need help
So been thinking about building a traditional Hot rod for some time now and finally got one!!! Well A pile of parts that is...hahaha. Looking for some advise, I have some decent parts to get... -
Technical ?Fitting old hubcaps to modern rims?
I have some 1940 ford 10.5” hubcaps that I want to use. I have ford 5x4.5 lug pattern and 16” crown vic steel wheels. I could use a 17”or 18” wheel but not smaller than 16”. The hubcaps dont fit... -
Projects "Saving" a Studebaker
This is about the “saving” of an abandoned automobile… You see, I’ve got an affliction regarding my want of saving all the old cars. Now of course I know well & good that I can’t actually do that,...
![[IMG]](proxy.php?image=https%3A%2F%2Fwww.jalopyjournal.com%2Fwp-content%2Fuploads%2F2022%2F12%2Fthunder.jpg&hash=16a23d6c3e495d8c722c2c24a64ef7d8)
...
Page 183 of 975
