The Jalopy JournalFeatured Threads Archive
-
Projects A on 32 rails
Finally got started on another project. 1930 model A on 32 rails. Seems like we are making progress super fast with this being a pre fab frame this time and not all hand made. Took me a probably a... -
Projects '34 Five Window Ford Coupe Build
New to the H.A.M.B and wanted to share what I brought back from Oklahoma and the progress on the build. I have always liked the look of the '34 Five Window Ford Coupe. My Daddy told me once... -
Sold: 1936 Ford Truck
1936 Ford Truck
1934 frame, 1936 grille, 1935-1936 cab chopped 4” channeled 5”
Rebuilt 1965 425 cui Olds engine and TH400 transmission
Offenhauser 360° intake and valve covers
Aluminum Radiator,... -
Event Coverage Grand National Roadster Show 2016
Well, we are a little less than two months away from the start of the Grand National Roadster Show for this year(January 29th-31st). As the anticipation builds I thought I would throw this thread... -
1933 ford 3 window
listing this for a buddy, if you're interested give Earl a call at 760-728-8957
33 3 window, metal work 100% finished ready for final body work, titled 33 frame, Nottingham grille, 3 piece hood,... -
Hot Rods Cost of project cars
I hear folks complain about how much it costs to get involved in our hobby pretty often. Then I see this ad in the classifieds for a 39 sedan and extra parts for $1500 and I wish I were 40 again.... -
Folks Of Interest bad seller
Ok. A month ago I bought a hood top for a 32 ford from Stickshiftkutoms for $200.00 ,a member here on the HAMB. After three phone calls and many emails to see where my hood top was all I got... -
1923 Ford Model T roadster t-bucket hot rod
Built in 2008-2009 by Blaise Kendall in Pennsylvania
Custom 1-1/2" x 3" frame - drilled and sleeved
1/4 elliptic 4 bar rear suspension with trackbar
Camaro rear w/ 3:08 posi & drum brakes - finned... -
Hot Rods The Belly Button Bucket Build Thread
INTRODUCTION:
This will be the build thread documenting my 1924 Ford T bucket, which I began building in March 2012. The gathering of parts dates back to 2009 or 2010, though; so I... -
Art & Inspiration My latest car related project
I found this while digging with an excavator at work.
I have this posted on another site and thought since it is automotive related I would try it here.
If you have seen this on the other... -
'35 Chevy Std Real steel delivery Lower price With some spare parts 6/5/2017
New wood main rails, and cowl. All from Dennis Antler. Super nice interior. Power steering, windows. Tinted glass. 350 / 4 bolt main, .30 over. 350 Turbo, Ford 8" rear. All new. 3500 miles on the... -
Art & Inspiration Hamb Tag Toppers
Now that the Hamb tag toppers are once again available why not show them off? HRP
![[IMG]](proxy.php?image=http%3A%2F%2Fimg.photobucket.com%2Falbums%2F1003%2Ftinkerbb%2Fmy%2520old%25201932%2520tudor%2520sedan%2F078-1.jpg&hash=18aa4f828fafd57b102bcd6eb2b017a7)
...
-
Art & Inspiration Low Budget Builds
Guys lets see your low budget builds if theres any out there in HAMB-land.
Dont have to be pretty but just honest drivers. -
Technical EZ Wiring
I have an EZ Wiring harness and am not real pleased with it. Need some help guys. Can't find all the wires that go to the headlight switch.Is there one for the headlights? Also am trying to wire... -
1928 Ford Model A roadster
1928 ford original steel body & frame with rumble deck lid.
Rebuilt 1936 ford 21 LB Motor, with adjustable lifters, aluminum heads, new 97's carb, rebuilt generator, starter, fuel pump, new... -
Technical *** December 2015 Banger Meet - Naughty but good at it ***
Here is the banger link list:
For the HAMB banger newbies, here are some links to a lot of banger info:
Flat Ernie maintains the monthly link list. Every month is listed:... -
Technical ? Of Old 6 Cylinder Engine Reliability
Here is a topic, that no doubt gets "hashed out" very often whether it be a Chrysler Flathead, A Chevy Stovebolt 6, or... -
Technical Starting my first '32 frame.
I have an original '32 frame with both crossmembers in place.No rust or pitting. I have an original K member. When I placed the K member in the frame I found someone had welded 1/4 plate to the...
![[IMG]](proxy.php?image=http%3A%2F%2Fwww.jalopyjournal.com%2Fwp-content%2Fuploads%2F2015%2F12%2Fleader.jpg&hash=b783eb99613ffd2625c68ca372877b3b)
Page 863 of 952
