The Jalopy JournalFeatured Threads Archive
-
Event Coverage 6th Annual Texas Nostalgia Nationals June 6th!!
Make plans this weekend to attend the 6th Annual Texas Nostalgia Nationals in Grand Prairie, Tx. Saturday June 6th Drags are open to 1972 and older cars and trucks....
-
Technical Contactor in welder went out. Is that due to lots of tack welding?
My Hobart Ironman 210 took a dump! Needs a new contactor and range switch. 3 hrs labor + parts = $660! Ouch! I've had it for 3 years and have done quite a bit of welding with it.
My question:
Is... -
Steel Model T "Tub" body, Fiberglass T bucket body, T bucket frame
Real steel 1923 Ford Model T body with windshield frame and dash. Body is just tacked together in its current "Tub" form and could easily be shortened into a bucket or roadster type body. Sold... -
Hot Rods what caused this?
brand new motor mount, average small block, in a '57 chevy pickup. passenger side. -
Projects Gold Metal Flake
Hello all,
I just got done spraying gold metal flake on my dash and having a issue here.
The dash was originally based in a 3 stage gold and then gold flake over the top of that. The problem... -
Event Coverage Photos from Roy Brizio's 30th Annual Shop Party & Open House
Here are the Photos that I took at the Roy Brizio 30th Annual Shop Party & Open House.
The event had a great turn out. The place was packed full of Hot Rods and people. It was a great day to see... -
Hot Rods 2 Gas Gauges on one sender?
In order to eliminate the gas filler on my 'glass '31 chopped sedan delivery, I'm considering a 2 gallon Moon tank in front of the grill shell with a high volume fuel pump to transfer the gas from... -
1931 Ford Hot Rod *Price Drop!
1931 Ford Tudor Sedan chopped 3 1/2"
1954 Dodge Red Ram 241ci Hemi, Powerglide Trans, 8" rear, disk brake front end
Less than 5k miles on the motor. $21,000 obo. Might be willing to trade towards... -
Projects 1928 Model A project
I'm gathering parts for a build of a roached 1928 Sport Coupe depression-era banger . I'm torn between a full-scale old-school build or leaving it in as-is condition, sans the stock... -
sold please delete
1964 C10 SWB Patina!! Clear title. Super straight body with minor rust. Couple pinky holes in rockers, some minor rust coming thru on the floor along the inside door... -
1938 Willys 2 door sedan
![[IMG]](proxy.php?image=http%3A%2F%2Fi246.photobucket.com%2Falbums%2Fgg87%2Fblown392%2F005_zpsvxllzgm3.jpg&hash=7a645b373181997499166ff98cfefd7e)
1938 Willys 2 door sedan body. (no chassis) Includes doors, running boards, deck lid, very hard to find rear...
-
Event Coverage Hot Rod Reunion Bowling Green 2015 (Who is going)
Well I did a search to and did not find a thread.
Just curious who is going? I got my tickets this week.
We will be coming in on Wed afternoon and leaving on Sunday morning.
It is our annual "GUY... -
Technical were can i get pistons for a 331 hemi
hello all i'm going threw my first early hemi rebuild the block is currently at a shop and the cylinders are getting boring hopefully soon does anyone know if they make higher compression pistons... -
Customs Bringing our 1939 Ford Deluxe coupe out of 35+ years Hybernation
This story involves engines, cars, and dreams.
My 39 Ford and I were born the same year. I've had a few updates and way back before I bought the old coupe in the summer of 1972 it had a SBC engine... -
Hot Rods Question on applying Bondo
Every time I sand bondo after applying it I( undercut it) creating a pocket where the bondo is.This usually occurs on curved surfaces.The bondo of course sands faster and easier than the metal... -
Technical Just Scored an Edelbrock X-F8 now what?
Howdy to all out there in H.A.M.B. land! here's the low down, I have a falcon based Ranchero that I am planning on getting back on the road. The engine is not very traditional, and I would like to... -
Technical Night Glow
Does anyone know when gauge clusters started getting painted with glow in the dark paint? I can't really tell but mine is original and almost looks like it did glow at some...
Page 925 of 950
