Register now to get rid of these ads!

Film at 11:00!

Discussion in 'The Hokey Ass Message Board' started by RIZ, Aug 26, 2004.

  1. Flat Ernie
    Joined: Jun 5, 2002
    Posts: 8,406

    Flat Ernie
    Tech Editor

    What? No intro police? Where's Rashy when ya need him? [​IMG]

    This isn't gonna be like Scribe getting fed up & quitting is it?

    Seriously, good job with the mag - you will be missed there.

    [​IMG]
     
  2. MIKE-3137
    Joined: Feb 19, 2003
    Posts: 1,578

    MIKE-3137
    Member

    Ha, always wondered what happened to Scribe...
     
  3. LIMEY
    Joined: Nov 5, 2002
    Posts: 1,987

    LIMEY
    Member

    Good luck with whatever you do & welcome, hope this doesn't mean R&C is going tits up....i kinda like that mag.
     
  4. kentucky
    Joined: Jun 12, 2004
    Posts: 1,006

    kentucky
    Member

    You will be missed, if not by the folks who bankroll the mag then by the ones that actually read it. I sure hope it doesn't turn into the Goldchainer's Digest [​IMG]

    Screw them, share some of that tech with us HAMBers!
     
  5. OGNC
    Joined: May 13, 2003
    Posts: 1,194

    OGNC
    Member Emeritus

    Man Riz, I am glad to see another one of the good old boys getting out from under the thumb of that place. Seems like a lot of the old-school guys (guys who where there back when I worked there) are getting out before the wheels come completely off the train.

    Heck in the past couple years they have lost Cameron Evans, Randy Fish, Scribe, Shane Reichardt, Kevin Wilson, Dan Sanchez and those are just the people who QUIT that i can think of off the top of my head. That doesn't include all of the people that have been let go (like dumbass Jerry Dexter). Pretty soon there isn't going to be anybody over there who can say that they even remember Tom Mcmullen or Ken Yee-- except RF. Some day he'll end up owning that place some how.
     
  6. atch
    Joined: Sep 3, 2002
    Posts: 6,194

    atch
    Member

    bad for R&C...

    good for H.A.M.B...

    (welcome)
     
  7. Tony
    Joined: Dec 3, 2002
    Posts: 7,350

    Tony
    Member

    Hi Riz.

    First off, good luck!

    Second, i think R/C and a LOT of other's are gonna miss your work.
    I know i will.

    Welcome to the HAMB and stick around..
    I look forward to maybe BSing with you on here..

    Tony...
     
  8. fab32
    Joined: May 14, 2002
    Posts: 13,985

    fab32
    Member Emeritus

    Hope the move proves benificial to you. I'm sure there are going o be a lot of folks sorry your not there anymore. I've always believed that when you close one door another opens up. I'll be pulling for things to turn out OK for you.

    Frank
     
  9. Django
    Joined: Nov 15, 2002
    Posts: 10,198

    Django
    Member
    from Chicago

    I've not been a subscriber for as long as some on here (only about 5 years) but the last couple years it seems every issue gets better and better. Sorry to see you leave.

    Now on to more important questions... where the hell have you been all this time and why are you just NOW joining up?? [​IMG]
     
  10. Damn... and R&C was just gettin' good again... [​IMG]
     
  11. Scotch
    Joined: May 4, 2001
    Posts: 1,489

    Scotch
    Member

    Thanks alot Court..!

    ...don't worry though...I might be right behind Riz in the exit line..

    ..this used to be a pretty cool job...but it's lacking one thing...it rhymes with funny...and it starts with m...

    Scotch~!
     
  12. Riz
    Hate to see ya go. I was just gettin' ready to drop you a note.
    On the other hand glad to see you're here. No intro necessary unless you aren't the real Rizzo. [​IMG]
    welcome friend,
    the Pknbner [​IMG]
     
  13. Skate Fink
    Joined: Jul 31, 2001
    Posts: 3,472

    Skate Fink
    Member Emeritus

    .........OK all you asskissers.........make the bitch do an "Intro!" Fair's fair!

    Just KIDDING! Rod & Custom has been my favorite magazine since the late 50's. It has gone through many changes over the years as have most of us. I had stopped reading it for a long time. I just got back into it the past few years. Probably the only "newsstand" magazine I buy regularly. Never really thought about it, but I guess it IS owed a lot to the leadership?? I was sad when Rick Amado left, but the "quality" was still there. Looks like I won't have to hunt through the grocery stores anymore.
    Still got Kustoms Illustrated, Rolls & Pleats, Rev, Magneto and I hope......Wrench.
    Thanks for the memories and wishing you all the best! (from one more ass kisser!) [​IMG]
     
  14. RATSO
    Joined: Oct 28, 2002
    Posts: 20

    RATSO
    Member

    Hey Court,
    Hope all is well. Got your message, I'll give ya a shout soon.

    To all the rest of ya, thanks a bunch for the kind words it means a lot to me. I'd hoped to get R&C back to the way it was when I stood by the newsstand waitin' for the new issue to hit, but I finally realized after nearly nine years (I mis-calculated earlier) that it was like shovelin' shit against the tide. Anyway, not sure the new gig will allow me enough time to HAMB it up very often, but I will poke my head in once in a while -- maybe just enough so I don't keep forgetin' my damn log in!

    All my best to all of the best. riz
     

    Attached Files:

  15. plmczy
    Joined: Aug 3, 2001
    Posts: 2,408

    plmczy
    Member

    Good luck Riz on your next job. I sure hope R&C stays the way it is [​IMG]. later plmczy
     
  16. scarylarry
    Joined: Apr 24, 2001
    Posts: 2,547

    scarylarry
    Member

    Well I just got my re-up notice from R&C..guess I dont have to send that one in now! Good Luck Riz
     
  17. 38pickup
    Joined: Aug 11, 2004
    Posts: 1,109

    38pickup
    Member

  18. hotrodsnguns
    Joined: Apr 3, 2004
    Posts: 545

    hotrodsnguns
    Member
    from Fresno, CA

    [ QUOTE ]
    Well I just got my re-up notice from R&C..guess I dont have to send that one in now! Good Luck Riz

    [/ QUOTE ]

    My thoughts good luck, with your talent luck is not needed!!!!
     
  19. [ QUOTE ]
    [ QUOTE ]
    Well I just got my re-up notice from R&C..guess I dont have to send that one in now! Good Luck Riz

    [/ QUOTE ]

    My thoughts good luck, with your talent luck is not needed!!!!

    [/ QUOTE ]

    YEAH, ME TOO!!! Wait a minute, I work there now! And so does Tim and Damon who've done the great work you have enjoyed for the last two years ass well. But I guess without David Lee Roth Van Halen never was the same either [​IMG]
     
  20. scarylarry
    Joined: Apr 24, 2001
    Posts: 2,547

    scarylarry
    Member

    So JimA, Tim and Damon are the ones we REALLY should be wishing the good luck to!! [​IMG]
     
  21. Well you lasted longer than a lot of others Jim.

    A little scitzo-fraidaya - Riz and Ratso?? Guess we won't see you back east for Reinbeck/Burlington. Any hints on your next career? Gonna stay out there in lala land?

    Well glad I got to see you to say hi at Louisville. I'm sure our paths will cross again. Yell if you need anything for your freelancing endeavors.

    Dennis and Sue
     
  22. Spike!
    Joined: Nov 22, 2001
    Posts: 2,733

    Spike!
    Member

    Someone give me a job..I want to suck from the corporate teet...Oh wait..No I don't. Guess that means my Jalopy Showdown coverage won't make it in R&C. Oh well.

    So, Riz, whats the new gig?

    Spike
     
  23. Nads
    Joined: Mar 5, 2001
    Posts: 11,875

    Nads
    Member
    from Hypocrisy

    Oh well, there goes R&C. Riz, I gotta thank you for putting out a damn fine magazine. I looked forward to it every month whilst you were the editor, I'm sure it will turn to shit now. I'm hoping it doesn't because it's got a proud heritage.
    Say what you will about OSR and CKD, as of right they're the only rags that speak to the average shadetree yahoo, albeit in some foreign rockabilly tongue.
     
  24. SanDiegoJoe
    Joined: Apr 18, 2004
    Posts: 3,519

    SanDiegoJoe
    Member

    Oh, well - you will be happier away from the Primedia Monster... I know that Courtney was.

    You really made a differnece @ R&C... really cut down on the mass produced hot rod shit and turned the focus on the home built (real) rods... Thanks for good reading and pix... Let us know where you land.

    I might just have to let me subscription laps...
     
  25. El Caballo
    Joined: Mar 3, 2001
    Posts: 6,332

    El Caballo
    Member
    from Houston TX

    You had what I would consider an abbreviated stay there, too bad. Any ideas on who will be taking your place?
     
  26. Good luck to you - you will be missed. I totally dig the RPU. [​IMG]

    I really miss the old Petersen Publishing. Have not talked to Damon since he was with Super Chevy.

    Maybe talk to the short guy that runs that other little publishing company. I always liked he and Ralph Panico(sp?).
     
  27. RATSO
    Joined: Oct 28, 2002
    Posts: 20

    RATSO
    Member

    Hi Dennis, It was good seeing you, as well. I'll make sure to stay in touch and I'm sure I'll take you up on your offer, I'm looking forward to being able to freelance for an array of titles.

    See ya on the road!
     
  28. Thirtycoup
    Joined: Jul 21, 2002
    Posts: 1,197

    Thirtycoup
    Member

    hey riz...you turned that rag into a mag, great job. welcome to the board and best of luck man, look forward to seeing you around here. later, mike
     
  29. 36couper
    Joined: Nov 20, 2002
    Posts: 2,014

    36couper
    Member
    from ontario

    Sorry to see you go.
    I vote for Jim A to replace you.
     
  30. Hackerbilt
    Joined: Aug 13, 2001
    Posts: 6,250

    Hackerbilt
    Member

    Sorry to hear about Primedia and R & C's loss. I guess we the readers will be the real losers on this one!
    Don't know ya...well, I sorta feel like I do, due to your high profile in the mag...but I gotta say I think it's gonna be a rough ride without you!

    Keep the faith!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.