Hot Rods ***Finally Got a real Hotrod! The "666" Coupe!***

THANKS...

 

Really *****in Bob

 

GO Man GO! I love this bad *** old hot rod.

 

That car looks so much better! Are the wire wheels under the Moon disks or were the wheels up dated?

 

I remember this car with the chevy 6 from 1 of Pork chops first drives in it .hard to believe it is the same car. looks like a lot of improvements from every one that has owned it & it just keeps getting better

 

So happy for you, this has been a fave of mine since I first saw it.

 

New drama.....
After the Hotrods on the Tarmac show, everybody in the show was invited to lunch on PCH. I was following a few Hotrods, missed the turn, so I turned at the next street, a little aggresivly, and when I got to the next stop sign, the car swung to the left, then the right! I went OH ****!!! Turns out the bracket on the Panhard bar broke. It's way too thin! Might be okay for the "Drive twice a year, Streetrods", but I drive mine everyday. I'm gonna stop by my buddy, Ron Cambra's shop tomorrow and have them make me one that's 1/4" thick. And i'll have them cut me a triangular gusset to beef it up. Think it might have been flexing back n forth. At first I thought it might have been my welds! haha Never would have heard the end of that....

 

Glad you got a handle on that Bob, I am considering beefing mine up as well. I have had no problems even on the **** *** bumpy roads here in Pa., but....

 

The roads here are pretty bad too. It's heaven when you're on a smooth road or freeway...That bracket was the weak link, so it should be much better...

 

Just picked up some great Bomber seats yesterday! Their really cool...not like those Speedway ones. Also picked up a new carb. It had a 750 dbl-pumper Holley, but I changed it out for as 600 Edelbrock. Seemed to be starving, so I just picked up a 750 Edelbrock. Holley is good for haulin ***, but not good for a daily. Leaked all the time, and wouldn't start in the morning....even after changing out the gaskets. I'll post some pics when put the stuff in.

 

My used Holley double pump 650 doesn’t leak. Been on the 56 since the early 2000’s.

 

This is what my Bomber seats look like.

 

Well....didn't say they ALL leak. Mine leaks....

 

Nice seats Bob. Will look killer in the car!

 

Thanks. The ones in there now are 67-68 Camaro buckets. These will look much better. Need to mount them right. Hopefully they'll be lower so I can see out better.

 

I bought mine from Hellsgate Hotrods, they look identical to yours. If so they offer mounts and adjustable sliders.

 

I THINK THESE ARE THE SAME MAKER. HE GAVE ME THE MOUNTING BRACKETS. IT WILL TAKE SOME TINKERING TO GET THEM AS LOW AS POSSIBLE.

 

Looks great!

 

Love it!

 

Should have the seats and new carb all installed saturday. WOO HOO! Stay tuned for some pics....Also, plan on putting a spacer on my front spring. Not enough clearance and I really don't want to cut my frame.

 

BRACKETS THAT CAME WITH THEM DON'T WORK. NOT EVEN CLOSE TO THE EXISTING HOLES. NOT GONNA USE THEM... I PLANNED ON BOLTING THEM DIRECTLY TO THE FLOOR ANYWAYS.

 

HERE'S WHAT THEY LOOK LIKE...

 

THEN I USED SOME SKATEBOARD WHEELS FOR SPACERS.

 

FIRST INSTALL. HAD TO GO BACK AND MOVE THEM BACK 3". COULDN'T PUSH THE CLUTCH IN, LOL.

 

THE FIRST TEST FIT...SURE WISH THIS THING WASN'T CHANNELED!!! YOU CAN SEE WHERE MY SHIFTER IS. THAT DIDN'T WORK EITHER. HAD TO LEAN FORWARD TO PUT IT IN 1ST & 3RD. CUT IT OFF AND REWELDED IT .

 

Looks good, but now your skateboard will throw sparks when you try to ride it.

-Abone.

 

Looks good Bob, should be able to $$ out of the Camaro seats since they're 1st gen.

 

I just envisioned his board up on blocks..

 

Yeah, but it sure gives that car a *****in stance!

 

HAHA....FUNNY! They came off a skateboard a pinstriper gave me for helping him out at Ink n Iron, years ago.
Thanks B4U...