FLATHEADS let's see them and be proud and flaunt them

Well I did a search for the great flathead and really didn't turn up much. I know a bunch of guy and gals are running them.. So let's see them .. I'm getting ready to toss one in a 31 Vicky and trying to decide to Soup Her Up or keep her in Stock clothing..
Sp please tell us about it and what goodies your running
thanks John

 

here are a few of mine

 

Merc crank .060 over, Mild Isky cam, Offy 400 heads, ported, mild relief,
(valve pocket transfer area only), balanced, adj lifters, Mallory electronic.

 

Here's mine.



Flatman

 

Here's my 48 tudor power supply........


[/IMG]

 

Every great flathead needs a little work first!

 

Soup it up,make it pretty and dependable and have fun with it. ....Bob

 

Here's mine.

 

flattie w/ edmunds 2x2.

 

i dont have any shots without my hat on!!sorry!

 

that`s funny ! because I have been there ? long live the flathead !!!!!!!!!!!

 

here is my old beater ! been floging on this motor since 91, I hate to touch it ? it run`s so good ! ran a 16.15 at the last drag race , and go`s well over 110 on the highway , came out of a 51 merc that was rebuilt with only 500 mile`s on it . flathead`s still rule the earth !

 

woop`s

 

This one is going in the T.

 

Here's a flathead

 

i like this shot of Buicks38 ( jerry's ) flattie in his roadster, i lifted the pic from the hemmings website coverage of the gathering of the faithful show. even though the pic doesn't show much of the flathead, it show's enough. mike

 

Before I put the McCulloch blower on it..........

 

A pic I took in NZ in 1972 or 3 It's in a 31 roadster owned by Norris Wright..........

 

Took this in NZ about 1977? Head covers were made in NZ by Berry & Chung speed equip'.

 

I saw this at the last TyRods show. When's the last time you saw a Judson blower in person?

 

With blower.....

 

This one's going in my '34 truck this summer. Probly run stock heads for now. Those shiny ones are expensive.

 

here is mine in my 53 ford p/u. i have since added a chrome gen cover.

 

Here's a few pics of mine....three 97's on an Offy manifold, Isky #88 Cam, Adjustable Johnsons, Dual Point Mallory,.....like that.....hooked to a '39 three speed top shifter, torque tube and banjo soon to have 3.54 gears in it! Flat-Power!

Brucie

 

Any additional information about that blower? That's wild.

 

Two of my favs

 

My preference in flatheads is 6 in a row. Here's 308 inches of
Hudsons finest...

 

No current pics of the motor, but I've got this... my motor is mostly stock, .030 over, 2110 Holley, MSD ignition, Red's headers.

 

How about a vid of one running?.....2x94's on a Thicstun manifold, Waggot heads and home made headers.




Binga