Hot Rods Ford t5 forward lever idea

Looking for ideas to put a Ford t5 on my flathead without the need to put a s10 tailshaft housing ,i end up searching for a remote lever and try for example that opel corsa c lever

 

I'm using a remote shifter with the original shift lever.

 

how about this tremec tko trans from ford svo parts, 3 position shifter, and look like this when done[. used center position for 37 ford with stock seatATTACH=full]2858281[/ATTACH]

 

Is the car already built and you just want to do an upgrade? If you are just now building the car, don't get in too big of a hurry to move the shifter forward.
My son is building a '31 coupe with a T5, and we put an S10 tail housing on the Ford world cl*** T5, based on always hearing that it is necessary. We did it before installing the engine and transmission in the ch***is. When we finished the ch***is and put the body on, we couldn't reach the shifter. It was way too far forward and we had to put the Ford parts back on it.