Projects front speader bar for Model A chassis

Making some changes on my hot rod truck that has a model a ch***is. Anyone know if a 32 spreader bar will fit in a model A ch***is? I hate to buy one to find out, especially if its shorter than an A ch***is. Can deal with it if its longer but thought I would check to see if someone knows? Thanks, C-dog

 

Dang! just solved my own problem by looking at the picture I posted. If I put a spreader bar in the ch***is it will go right across the bottom of the grill shell and look stupid in my opinion! Guess its a case of being too close to the problem to see the solution. Dont need no stinkin spreader bar!!! Sorry for the post guys!

 

According to wescott's frame drawings, the model A is longer, measuring 25 1/4.

 

Here's a 32 spreader bar on my '30 Model A.

 

Make your own. I made mine out of a piece of stainless tube I got from a dairy supply house. It was used tube and I paid a buck a foot for it. I think it was 2 1/2 or 3 inches in diameter. Then I covered it with the bumpers..... go figure.