Register now to get rid of these ads!

Hot Rods Gasser Gasser Gasser!! 1962 Falcon Futura with a Nailhead??

Discussion in 'The Hokey Ass Message Board' started by Chuckles Garage, Dec 16, 2009.

  1. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474

    Rusty
    Member

    thats got to be the baddest Falcon ever!!!!!!!!!!!!!
     
  2. UnsettledParadox
    Joined: Apr 25, 2007
    Posts: 1,107

    UnsettledParadox
    Member

    i noticed it has a plate. by todays standards that means its a daily driver, right? haha

    [​IMG]
     
  3. Saxxon
    Joined: Dec 14, 2008
    Posts: 1,834

    Saxxon
    Member

    This thing is so cool it has me looking long and hard at my Brothers 62 falcon sitting beside my Scout. He has visions of a pro-street race / street car. I'm thinking gasser style with a blown 472 caddy motor
     
  4. UnsettledParadox
    Joined: Apr 25, 2007
    Posts: 1,107

    UnsettledParadox
    Member

    good thinking. pro street is gold chainer slang for all show, no go
     
  5. Chuckles Garage
    Joined: Jun 10, 2006
    Posts: 2,365

    Chuckles Garage
    Alliance Vendor

    Thanks man! That is high praise! I've seen the stuff you build, rad.

     
  6. Chuckles Garage
    Joined: Jun 10, 2006
    Posts: 2,365

    Chuckles Garage
    Alliance Vendor

  7. Love this thread! Keep coming back every week or 2 for more little tidbits like this water neck:

    [​IMG]

    Really cool idea about tapping into the back of the heads for water; I've always wanted to put the radiator in the trunk of an open car to clean up the front - great idea!

    -Bill
     
  8. S.F.
    Joined: Oct 19, 2006
    Posts: 2,895

    S.F.
    Member

    that thing is badass
     
  9. Falcon Gasser
    Joined: Aug 29, 2007
    Posts: 940

    Falcon Gasser
    Member

    We need to set up a benefit so you can travel East and share this with the crowd out here, pictures are not enough anymore. Ah yes the life of being able to use your vehicle year around.

    Jon
     
  10. Chuckles Garage
    Joined: Jun 10, 2006
    Posts: 2,365

    Chuckles Garage
    Alliance Vendor


    Jon!

    Awesome Idea! Hahaha.....heck....I'll even drive it to the East Coast if there is enough gas money.
     
  11. Thats bitchen.....
     
  12. Great concept.
    Excellent execution/fabrication.
    Fantabulous documentation!
    This build brings sanity to the world and balance to The Force.
     
  13. resqd37Zep
    Joined: Aug 28, 2006
    Posts: 3,215

    resqd37Zep
    Member
    from Nor Cal

    Dude I'm stoked to have seen this car in person today. Thanks for taking the time to let me look it over and it was kool to meet you. It left a lasting impression on me. I'm feeling the need for more HP in my next build.

    James
     
  14. Clik
    Joined: Jul 1, 2009
    Posts: 1,969

    Clik
    Member

  15. Chuckles Garage
    Joined: Jun 10, 2006
    Posts: 2,365

    Chuckles Garage
    Alliance Vendor


    It was cool meeting you James! Stop by anytime!



    PS......there's newer threads on the car too!


    http://www.jalopyjournal.com/forum/showthread.php?t=499935
     
  16. Saxxon
    Joined: Dec 14, 2008
    Posts: 1,834

    Saxxon
    Member

    My brother is no Gold Chainer by any stretch of the imagination. If you knew him you would realize how funny that thought is. He'll keep it real. The Falcon will certainly NOT be a poser with a 547 BBF in it. He simply wanted a pro street style car that could be street driven as well as rip of a 10 second pass on demand. But he wanted to do it with comfort and modern safety. ie: Mustang II front end rather than a straight axle. Besides, he's keeping things old school with his 60's altered style 49 Prefect build this summer
     
  17. Chuckles Garage
    Joined: Jun 10, 2006
    Posts: 2,365

    Chuckles Garage
    Alliance Vendor

    Part 3 of this build is HERE
















    .
     
  18. old soul
    Joined: Jan 15, 2011
    Posts: 1,093

    old soul
    Member
    from oswego NY

  19. 2loud2old
    Joined: Aug 15, 2009
    Posts: 305

    2loud2old
    Member

    Your car is the kind of car that many of us dreamed about in the early 60's but had no money or ability. I remember in the summer of '62 we shoehorned a 283 Chevy into a Falcon. Junk yard 283, a set of power pack heads,and a 4 barrel manifold. We actually cut the stock cast iron Exhaust manifolds at the Y and brazed them in the up position because they would not clear the shock mounts. A nasty looking piece of that bendable exhaust pipe routed up and over and down to dual mufflers. One pipe out the back and the other cut off short as not to give away the V8. Stock suspension and a three speed with a floor shifter. I remember us sneaking in to the junkyard and stealing a flywheel,clutch and pressure plate that we looked at that day but couldn't afford to buy. I had just graduated high school and finished a 6 week welding course at Lincoln Electric in Cleveland before going to college in the fall.The guy that owned the car wanted me to weld a set of traction bars up under it to make it look "bad".I told him that the Falcon had coil springs and no frame. Just do it for looks,he said. One fell off the first night just pulling into the Eat'n Park. Green car with stock wheels and tires. Ruined a good economy car, never ran right, and boy were my buddies parents pissed when they found out what he had done to that Falcon. Best of luck with your car!
     
  20. dca-sam
    Joined: Jan 16, 2012
    Posts: 1

    dca-sam
    Member

    Thanks for the before & after photos. My first car was a white '62 Futura. After that I had a red '62 Futura, and seven Falcons in all. They were good cars, easy to work on & maintain on a tight budget. I recall my buddy Ken blowing my doors off with his red '64 SS Impala 396 on I-5 near Portland, OR in 1965 just before I entered Basic at Ft Ord, CA. He entered the Army a year later. The cars are gone, but we're both still around.
     
  21. johnk320
    Joined: Jul 23, 2007
    Posts: 329

    johnk320
    Member
    from Erie PA

    Amen to that, brother! Thanks for serving....
     
  22. 65COMET
    Joined: Apr 10, 2007
    Posts: 3,086

    65COMET
    Member

    My Comet is Pro-Street and NO poser!!! How does 10.4s sound with a small block Ford and Four speed,NO NITROUS or BLOWERS!! It has sat in traffic for hours and not overheated or puked anything out.Stick your 'Goldchain' up your ass!!! ROY.
     
  23. Jims Classics
    Joined: Dec 17, 2011
    Posts: 191

    Jims Classics
    Member

    To each his own but I wish you could find another Falcon body! You have chosen a "rare" 62 Futura high dollar for a sedan, bucket seat car that from the pictures is all there for a restoration. The chrome alone is very hard to find. I have a 62 2dr sedan I restored with a 6 cyl 4 speed. At least what you have is not the high dollar "Sprint' that you chose. NO charge for the sermon. I wouldn't say you are "not of sound mind," you just mis-judged what you do with your Falcon. Jim
     
  24. Chuckles Garage
    Joined: Jun 10, 2006
    Posts: 2,365

    Chuckles Garage
    Alliance Vendor

    Oh man. I'm so glad you showed me the light. What a HORRIBLE thing I have done!

    I hope the 60's economy car gods will have mercy on me!


    Don't fret.....this car was a parts car.....it had the interior removed, a non-original engine, and I sold the good outside trim to a guy restoring another Futura.
     
  25. 65COMET
    Joined: Apr 10, 2007
    Posts: 3,086

    65COMET
    Member

    Rare?There are tons of 62s running around!!! I get that crap from time to time about my Comet!!! It is your car,build it your way!!!!TOO many bitchin old cars tucked away where only the owner gets to see them!!THEY ARE JUST CARS!!!! ROY.
     
  26. 60 ford
    Joined: Nov 23, 2007
    Posts: 1,807

    60 ford
    Member

    I am also using a 62 Futura, bucket seat car for my alterwheelbase build. I looked a long time to find a Futura, I didnt want to use a plain jane Falcon. Oh well to late now. Chuckles I guess we are terrible, I feel awful.:(:(:(
     
  27. Haha...I've gotta check in here once in a while...for posterity.

    I felt FAR worse about having a hand in the destruction of that Nailhead crankshaft than I ever did about taking a grinder or a cut-off wheel to that crusty old Falcon body.
     
  28. 1971BB427
    Joined: Mar 6, 2010
    Posts: 9,075

    1971BB427
    Member
    from Oregon

    I am inspired! Just bought a '63 Falcon Futura, and I plan to ruin it too! It will get a 454 Chevy with Weiand tunnel ram, Super T10, 8.8" Ford rearend, and an Econoline straight axle. Of course I'll chop up the rear wheelwells, and the inner fenderwells up front!
    They bore me to death when they're stock.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.