Projects Glass '32 5 Window

Wishing you many years of happy Hot Rodding retirement.

 

Thanks.
It's been a week retired, love it. Working on building permits, might break ground as early as next week. Will post as soon as I can, New Meadows and retirement is awesome!!!!!

 

View attachment 3908616 It's been a busy 9 days. They break ground on our new house on Monday. Found a 2008 GMC in Spokane. Drove up and bought it from a wonderful women who had lost her husband awhile back. Deal went so well we are invited back and got a hug before we left. Great truck, this is the newest I have ever driven, comfortable and good on gas. Started getting some parts for the 32. Any good gl*** guys out there? Recommendations near Idaho

 

Five window gl*** body, New Age in Conn. gets good reviews.


Phil

 

Bob's Cl***ic Auto Gl*** in Blachly, OR supplied the gl*** for the '31. Very knowledgeable and helpful

 

Thanks I will check him out!

 

If you find a good gl*** guy, but does not have patterns for 5w, I have all original gl*** for 5w to make patterns from. I realize your body is chopped, but if there is anything I have that would help, let me know.

 

Thanks I'll keep you in mind when I get ready. Thanks again!!

 

Well, it’s been awhile. Forms are being poured as we speak. One day closer to getting back to my coupe. This time away has given me time to come up with new ideas for the coupe. So far we love New Meadows, today it’s 90 degrees in Star near Boise, where we sold our house , it’s 77 degrees here. Guess I won’t be needing Air conditioning for tooling around up here! I can get used to that. Time to go to the house sight and see what’s going on. Thanks

 

The framing is started today, parked my truck on the new garage floor. Found these old pics from 1964 at Maple Grove Dragway and some from Irwindale from the early 70's.

 

Cool photos, nice to see you are making progress on your other project.

 

Miss working on the coupe! Been looking for gauges and maybe a cowl vent kit! Would like to find a 60’s Dixco tach, had one in my 57’ Chevy! Read thru my entire thread! Sure got a lot of great comments! Soon as I can I will resume the build with all the details! Retirement gives me more free time, getting accustomed to that!

 

Thanks, how’s your ride doing?

 

I’ve had a major issue with the transmission so that has been ****ing up all my time and cash. However, I have just returned from 2 1/2 weeks holiday in California and had a great time, got to some rod events and collected a few more parts. Hope to be back on track with the coup soon

 

Sounds serious! Hope it doesn’t wound your wallet too much! House is coming along great , most of the walls are up and the roof trusses go up in 2 weeks along with the heating and plumbing! Sounds like you enjoyed California, might do the swing thru Califorrnia to Vegas and back up thru Utah once the coupe gets finished. Do you have the cowl vent in yours and if so how much do you use it?

 

Decided to go with Mooneye gauges! Any comments on them would be appreciated. Had a Dixco tach in the 60’s and their half sweep tach looks just like it. Heard about some plastic issues?

 

Also need input on cowl vent. Is it a must or would a fan under the cowl do the same thing! Maybe a better method, my back window is fixed! Maybe a couple vents in the floor behind the bulkhead with a push pull control? Anybody!!

 

New Age Motorsports will sell you a complete cowl vent kit to gl*** in. Really like the one in mine but I am still building so no driving experience.

SPark

 

A cowl vent is always a plus in any car, speaking from experience.

 

Sounds like I need to look into this more! What do you do when it rains?

 

Close the vent. There should be a place for a seal and a drain. Most definitely hook a hose to the drain and route it out. I have cowl vents in all my cars and love them.

 

Thanks

 

It has a recess the lid closes against and there is a rubber seal between the lid and that recess for a seal.

SPark

 

A cowl vent and a roll down back window will make your car much more comfortable, way better than rolling down the side windows. This is from 5 years experience.

 

I bought a Brookville roadster cowl top and vent and had a local gl*** guy router out and gl*** it into the cowl on my gl*** body. Trimmed a couple of inches around the vent hole and put the rest in the s**** pile. Expensive yes but you end up with a proper steel cowl vent. Only thing missing was the vent handle and Vintique or Bob Drake have them.
Essential thing to have in the Summer.

 

Thanks for your responses! Wonder what would happen if I reversed the opening and took advantage of the high pressure area just in front of the windshield, like a cowl induction hood on a Camaro or Corvette? Just saying!!

 

I've been thinking about adding something in all the space at the top of the firewall under the cowl lip.

 

Split, is it too late to fab up a roll-down back window? I have a cowl vent in my coupe, but to be honest I seldom use it! With the windshield open and the rear window down (a bit or all the way - depending on the need) there is more than enough air flow to keep me cool. There is a small matter of bugs in yer teeth on the highway.. but you'll get them through the vent as well!

Dave

 

I do like the clean look with no vent, I have the stainless hood hinge and SoCal makes a spear to finish the hinge line on the cowl! The top radiator shroud would need the trim to complete the line. I was thinking about a vent or two behind my aft bulkhead on the belly skin, like the top cowl vent, to let the air out under the car when the windshield is open for air. Might be a fun project when the time arrives!! Any comment will be appreciated!! Positive or negative!

 

Spent the last two days in Boise with my kids and wife! Had fun, worked on my sons 2007 Monte Carlo SS with 58000 miles. Went to the storage facility to move more stuff up to New Meadows, Idaho. Took this pic!