Register now to get rid of these ads!

Goodbye, HAMB

Discussion in 'The Hokey Ass Message Board' started by av8, Dec 21, 2003.

Thread Status:
Not open for further replies.
  1. av8
    Joined: Mar 3, 2001
    Posts: 1,716

    av8
    Member

    This old guy is out of here. I tried to responed to one of the HAMBS's favorite folk, JimA, but Ryan would not let me speak unkindly about the wonderful JimA. My comments were blocked again and again. JimA, of course, is permitted to say whatever he chooses to say.
     
  2. Before you go running off Mike, I would talk to Ryan and get the real scoop. I dont think he was censoring you. If anything he would kick out Jim first. [​IMG]
     
  3. Deuce Rails
    Joined: Feb 1, 2002
    Posts: 2,016

    Deuce Rails
    Member

    I don't know what happened.

    All I do know is that you're a great source of inspiration. Remember this post?

    Don't pack up your toys and refuse to play now!

    --Matt
     
  4. FWilliams
    Joined: Apr 24, 2001
    Posts: 1,986

    FWilliams
    Member

    now THIS sucks.
     
  5. Hang around man- its all good.....it'll get better.
     
  6. DrJ
    Joined: Mar 3, 2001
    Posts: 9,419

    DrJ
    Member

    Hey Mike.
    I see this post;
    "Let's see if I get this -- JimA discovers some neat concept years after it was accepted by the folk for whom it was intended, and slow Jim gets credit for the wonderfulness of his late discovery. Is that about right?"

    By you on that thread.
    Was there more?
    You sure it's just not a glitch in the system at one end or the other made your post go away?

    I doubt Ryan edited your post, if he did he'd say so as he always has in the past.

     
  7. 19Fordy
    Joined: May 17, 2003
    Posts: 8,313

    19Fordy
    Member

    Hang around cause when the going get's tuff, the tuff get going. Your're tuffer than that and have much to contribute.
     
  8. hotrodladycrusr
    Joined: Sep 20, 2002
    Posts: 20,765

    hotrodladycrusr
    Member

    I don't have a clue as to what the fuck is going on but I'm not a happy camper hearing this! [​IMG]
     
  9. Zeke
    Joined: Mar 4, 2001
    Posts: 1,716

    Zeke
    Member

    If Ryan is actually censoring you I doubt you'd be the only one to go. Honestly I really don't think that's the case. Ryan can speak for himself.

    Now I have had in the past thread responses that I posted never show up. It happened a couple of times for what it's worth.
     
  10. Dirty Dug
    Joined: Jan 11, 2003
    Posts: 3,721

    Dirty Dug
    Member

    Say it ain't so
     
  11. scarliner
    Joined: Sep 3, 2003
    Posts: 622

    scarliner
    Member
    from Macon Mo.

    Av8, I have'nt been here all that long,but I have become familiar with your posts and it seems to me that you are a hot rodder at heart and know your stuff.I would hate to see you leave,due to these facts.Surely what ever the problem is,it can be worked through.Stick around,theres a lot of good here.
     
  12. dondanno
    Joined: Mar 20, 2003
    Posts: 679

    dondanno
    Member

    I dont know whats up, but I am with dirty dawg on this one...Danny
     
  13. shoebox72
    Joined: Jan 24, 2003
    Posts: 1,489

    shoebox72
    Member

    I think it was just a technical glitch, If Ryan edited the post would'nt it say so at the bottom of the post? Don't jump the gun AV8, I'm sure there is a reasonable explanation.

    Billy
     
  14. Rooster
    Joined: Jan 14, 2002
    Posts: 355

    Rooster
    Member

    I can say for the record that I'VE been censored in the past. I ALSO have the conviction of my own thoughts and THE SENSE OF HUMOR to accept that I DO NOT OWN THE RIGHTS TO THIS BOARD and sometimes may say things which are Unacceptable, due to these convictions. I am a mere participant. I accept without reservation, Ryan's right to clean up any offensive language or modify a reply. ALL posters at this site are or should be aware of this. I would assume, aV8 would be. It would be sad to see him leave, but we ALL know that this "garage" is somewhat of a a commnity affair, should try not to start flame wars, and respect it's owners right to manage it.
     
  15. 286merc
    Joined: Mar 3, 2001
    Posts: 1,793

    286merc
    Member
    from Pelham, NH

    Mike, give it a rest please. You pulled the same sympathy gambit on RRT not too long ago and on the Fordbarn before that.
    You are a top source of info and guidance but way too sensitive about little shit for crissakes.

    So there I said it; stick around and quit whining!
    Besides there arent many places left to go that are worth anything[​IMG]

    So go ahead and holler at me and get it out of your system. I forget which one of us is older? I turned 63 on the 13th.
     
  16. Rooster, ya dumbass.........you have never been censored if Ryan did not come out and say he deleted a post from you.
     
  17. I have posted or made a reply to a post and know that I have hit the send button to never see the message hit the board. I never thought Ryan had deleted/blocked or censored me. I always assumed that my message is floating somewhere in cyberspace? I have seen replies to questions come in before the actual question made it to the board???? I'm sure it is just a glich in the system. If not...this is a real PISSER! [​IMG]

    AV8 have you talked to Ryan about this or is this just an assumption? [​IMG]

    Rooster are you sure you are the same guy I met in Swanton? [​IMG]
     
  18. yorgatron
    Joined: Jan 25, 2002
    Posts: 4,228

    yorgatron
    Member Emeritus

    you need to lighten up a bit and quit being such a grouch.you've lashed out at people (myself included) for real and imagined slights many times in the past.if all you want out of the hamb is to get your ass kissed then by all means leave.jimA has suffered far,far more abuse than you ever have or will,and he sticks it out with sense of humor intact-george
     
  19. burndup
    Joined: Mar 11, 2002
    Posts: 1,938

    burndup
    Member
    from Norco, CA

    Just because JimA can't stand on his own two legs doesn't mean he should have any help.

    HINT! HINT!

    Mr Bishop, you're not going anywhere, thats an order! [​IMG]
     
  20. El Caballo
    Joined: Mar 3, 2001
    Posts: 6,332

    El Caballo
    Member
    from Houston TX

    Mike Bishop, stand down and cool off. Please do not go away.
     
  21. Skate Fink
    Joined: Jul 31, 2001
    Posts: 3,472

    Skate Fink
    Member Emeritus

    Ryan has always seemed to be a VERY fair guy. I doubt that he has busted anyone's chops for no reason. I'm sure it all must be a misunderstanding......hang around!
     
  22. Levis Classic
    Joined: Oct 7, 2003
    Posts: 4,066

    Levis Classic
    Member

    aV8 - Please dont leave - you are a inspiration to many. After reading your book I was obsessed with building many traditional hot rods. You are a HUGE source of knowledge and we would be VERY saddened to see you leave. Talk to Ryan and find out the scoop.
     
  23. hatch
    Joined: Nov 20, 2001
    Posts: 3,667

    hatch
    Member
    from house

    Baby please don't go...baby please don't go...baby please don't go, down to New Orleans...cuz I love ya so...baby please don't go......The preceding announcement was NOT for AV8....I just like the song.
     
  24. Rooster
    Joined: Jan 14, 2002
    Posts: 355

    Rooster
    Member

    T-Man et al, polease The REAL issue here is helping Mike Bishop accept that sometimes we say things... We should all TRY to get along, despite occasional personal differences. Ryan and I had a laugh over the singular time, among many I wish I'd have HAD an editor, and somehow the "PhoneBITCH" wasn't a party to it. I remember a line way back, check yer ego at the door, and welcome...


    [ QUOTE ]
    Rooster, ya dumbass.........

    [/ QUOTE ] So let's just leave that as a mutually returnable sentiment.
     
  25. sodbuster
    Joined: Oct 15, 2001
    Posts: 5,065

    sodbuster
    Member
    from Kansas

    Mike,

    I alway's look foward to what you post and I sometimes miss a few so that I have to "Search" your name to find stuff that I missed.

    [ QUOTE ]
    It was a great idea and has been a very successful "experiment/exercize", Ryan. I've been dazzled by so many neat threads, from ideas to fully fledged projects, with some excellent methods and tips along the way.

    I confess to having nothing important to offer because everyone has already seen all my "white rabbits" and I'm a week away from an interesting, fresh how-to that I've planned to post in a series of related threads very soon.

    The HAMB is truth and beauty! The HAMB lives!



    [/ QUOTE ]

    Chris Nelson
    Kansas
     
  26. WZ JUNK
    Joined: Apr 20, 2001
    Posts: 1,898

    WZ JUNK
    Member
    from Neosho, MO

    Please take some time to think about this problem. I have seen many cases of misunderstandings on the internet. Most of the problems were caused by people who do not communicate their thoughts well when typing. I value your insight and your knowledge and I do not want to lose it.
     
  27. Unkl Ian
    Joined: Mar 29, 2001
    Posts: 13,509

    Unkl Ian

    Some of us decide which threads to read based on the subject line.
    On select occasions,I will read the thread,or ignore it,based on who posted it.
    I always make a point of reading AV8's posts.

    Your friends will miss you Mike.
     
  28. JamesG
    Joined: Nov 5, 2003
    Posts: 5,249

    JamesG
    Member

    This is really bumming me out..... Come on guys its only three days till Christmas!
     
  29. Jeezus what an EGO!
     
  30. Flatdog
    Joined: Jan 31, 2003
    Posts: 1,285

    Flatdog
    Member Emeritus

    Mike, I really hate to see you leave here, but I also understand that a man has to do what he feels he must do. You're one of the reasons I landed here, I'll personally miss you.
     
Thread Status:
Not open for further replies.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.