Hot Rods HAMB A Tudor Club - lets see them!

Oh Hell yeah, I'm jumping in!
I just chopped mine 4" over the weekend. I'm running a '64 318 poly and 3x2's

 

Boy, there are some nice model A Tudor projects happening out there and great to see guys are still posting their pic's.
Nice to see some of the chassis work that is going under them as well.
I just took delivery of my 32 repro rails for my next tudor project, going to be a little so getting started but I hope to get some pic's out soon.

 

Here is my '28. Started with a nice rust-free body and added everything else new as I went along.



Here's how it sets today. Just need to finish plumbing, wiring, floors and hardware.

 

Nice work Jeff, love the extra safety added to the door latches!
I hope that panhard bar sits level when the body weight is on.

 

Someday i will have the perfect tudor, wait and see guys!

 

I'd believe it, you guys from WA sure love your hot rods.

 

it's a figment of his imagination. and he don't know how to use a camera.right Marty.

 

Somme cool pic's on this thread.I guess i better throw my two cents in,so heres mine

 

best pic of my '29 i could come up with right now. need to get out there and take some better ones.

here's me and tomcat46 channeling the body over the '28 buick frame she's going to reside on. power will be a dual quad 461 olds with a switch pitch 400 trans and an olds posi rear. will get the '38 caddy flatty when i can afford to build it though

 

Ok, here's my two heaps. I will hopefully start the build up this winter if I can get the garage sale crap out of the garage!

 

I like it!

 

Here's my '28 that I've been plugging away at for the last seven-plus years! Started with a bare '30 frame. It has an "A" rearend with 3:54's, '39 top loader with later gears including 16/28 main/cluster, and an 8BA with 59A front bits (dist., pumps, generator and double sheave pulley). Am using '84 Fiero front seats and a '92 Mazda MPV seat for the rear. F-1 steering box and '39-'41 style juice brakes all around. Built my own exhaust system which includes headers and "A" torque tubes behind the Cherry Bombs. Still in the mockup stage. Regards, Dave.

 

Dont forget to join the Flathead Cadillac Club as well you are mixing in fine company with that combination.

 

Nice combination Dave, like to see more progress pic's as it happens.

 

My tudor is an ex chookhouse,hope to join the 30 coupe crew soon.
nothing fancy,but all mine.

 

Yeah why not..........here's my shitter, again.

 

It's back see post # 25

 

Here's mine

Injected 5.0L Ford with C4



Chris

 

Hey Chris that is a real sweet looking vehicle or should I say hot rod.
Is that a 30 visor on it?

 

Bit of an update on mine (posted back on page 1). Found a good frame, and have z'ed the rear 5", and made up a trans mount for the 39 box I now have. I've got the motor and trans mounted in the frame. Just found a new Chassis Engineering 4" dropped beam at a great price, also a pair of 39 spindles and steering arms made for a dropped axle. Sorry, the fecking camera appears to have taken a dump and I'm kind of loathe to buy another. I figure the $$$ are better spent on parts.

 

Yep - good spotting!
A 30 Visor worked into a filled roof.

Chris

 

Yea, I'm in...no pictures as yet. Just bought a complete '31 Tudor in WI and am trying to get it home. Will post more when I get it down here.
Glenn

 

Where are you guys running your gas tanks and how many gallons can you carry?
Mine is under the floor between the diff and tranny with a cut out for the drive shaft.
I can carry 23 1/2 gallons.

 

Answer to a gas tank PM:
The 1st pic shows the drive shaft cut out and you can see in the lower part of the pic a piece of fuel hose I installed to allow the fuel level to balance on both sides of the cut out.
The 2nd pic shows the tank to your left and how it clears the 4 bar, there is a lot to be said for parallel 4 bar set ups as the triangular style takes up all the useable tank space.
Russ.

 

you were very lucky to find a heap in just that particular shape.
dan

 

i cant compete with the rest of you , but i built , painted , upholstered & drive mine everyday yr round . love my fenders ! .. steve

no pic , cant seem to get it to come here ..............

 

No competition here Steve, hot rodding is about building it good and doing it your way, I also love those fenders.
A daily driver, you got tobe happy with that, living the dream!

 

Well heres mine, still under construction.

Running sbc 400, 700r4 trans, and 9 inch with 4.11's and chopped 5.5 inches.

 

man i want a banger A!