1952-59 Ford Headlight/ taillight

Hello ! I am in the final phase of the connections, only here I am lost for the connections on the switch foot and on the switch light! Can you tell me how to plug in the headlights, taillight and ? What wires go on witch foot and switch light?With a sketch would be nice!!
Thank you soo much !!

 

This is for my 54 Ford customline !!!!

 

This should help you, go to post #518 and the ones that follow it https://www.jalopyjournal.com/forum...ne-daily-driver.1027219/page-18#post-12641103 There are diagrams and pictures.

 

Part of a 1955 Diagram. I don't know how that compares to the 1954 wiring.

 

If I recall correctly, he used a universal harness so the stock diagram may not help. When you use a universal harness they are almost always GM Chevy coded this requires wiring in a jumper wire to work on a Ford switch. See Post # 525 https://www.jalopyjournal.com/forum...ne-daily-driver.1027219/page-18#post-12641103

 

This shows the lay out of a Rebel 9+3 kit as several members over the years have used.

 

I used an aftermarket harness, but the OG schematic was still handy. All the nifty stripes on the Ford steering column bundle were gone... but there were only around 10 wires to identify.

 

Kool, I have my front and rear lights, turn signals and stop lights, but I have a night light that doesn’t work or everything works