Great job! Only those who have done a full strip and prime will know the amount of work between those pics.
https://www.ebay.com/itm/3647634551...MI3t3bp7zwkAMVayvUAR1fABAOEAQYBiABEgLkV_D_BwE This is the pedal ***embly i bought and then I got a Willwood compact master cylinder.
I’ve been busting but on customer cars and this weekend decided to tinker on my own stuff for a bit so I drug the Y block out of the corner and stated to put together a list of everything I need to make it run. I also saw something I wanted to try on my manifolds with graphite but I also decided to take it one step further and smooth them while I was at it.
A got some time on the engine lately and got the other manifold finished along with hours of sanding and polishing bringing these valve covers back to life. I also got a package from Nystrom Performance with my fuel fittings to get the carbs linked together.
I see where you have a 8'' chop How tall are you? Im 6'4'' so Im thinking 5'' on mine without a seat lowering. TIA
Im 5'11" and I have a caravan seat. The seat frame sits about 4" off the floor. I have plenty of room to be comfortable. I'm not sure what the distance is from the floor to the top of the seat and I will say I'm slouched back a good bit the way I have it set up.
The Jalopy Journal
