Hot Rods I may have a trade in the works

I have a fellow that wants to trade my Plymouth for a 1964 Dodge station wagon, it needs floor work and the brake have to be gone thru but its 64 and its a station wagon.I will keep you all posted to what happens.MERRY CHRISTMAS to all you fellow H.A.M.B.E.R.S on this board.Bruce.

 

Merry Christmas Bruce! Sounds like just maybe..... we can talk about your next project here legally.... lol

 

Hi. As much as you like wagons go get it done and end this year a high. Or if it takes a week start next year that way. Good luck with the trade. Jimmie

 

Fingers crossed.

 

I saw one with a early camaro front bumper it really streamlined it.

 

I hope you have a successful trade! Merry Christmas, Gary

 

Look for rust up under the dash at the underside of the cowl panel, especially at the outer ends. These cars tended to plug up the cowl drains and would collect debris and water that entered thru the cowl vent grille at the base of the windshield. If the front floors needed rust repair this might be the reason why.

Happy hunting. These cars are otherwise fairly bulletproof.

 

Bruce, good luck with the trade, 64 dodge is a good looking wagon.

Frankie 47, camaro bumper is pretty interesting, is there a roll pan behind the factory dodge bumper or do you think they made one. Trying to picture it.

 

Merry Christmas To All
Bruce I Hope you Get it I have been Banned on the ebay Motor's Board


Just my 3.5 cents

Live Learn & Die a Fool

 

Good hunting Bruce , dont settle for less than what you already have.

 

Hope it works out for you, and is in better shape than you think it is.

 

remember, if what you can easily see is bad beware of what you can not see - trade with open eyes -

 

Bruce! Merry Christmas to you and all on the mountain. Looked it up to get a look at the body style. Couple of pics.


Let us know what the tail light treatment looks like.

 

Hope it works out for you Bruce, ‘64 Chrysler products are rad, I may be biased though....


Sent from my iPhone using H.A.M.B.

 

Hoping it works out in your favor Bruce. Merry Christmas to you and your family . Don't be a stranger.

 

Not a bad looking wagon. Mechanically those are pretty simple and easy to work on. I go along with the seriously check for rust suggestions though. Being as they are uni-body you have to check the substructure real close too.

 

Good to hear that you’re still kicking’.
Hope the trade is in your favor.
Merry Christmas from the frontier.

 

I think that they are uni-body, if so check to bottom up.

 

Bruce, I know how much you like wagons so I wish you all the luck in making the trade, that's from one wagon guy to another.

That would make for a fantastic Christmas present for you my friend! HRP

 

I'm thinking Ramchargers push car.

 

Those are VERY cool wagons

 

This reminds me of a white with red trim '64 Dodge wagon that belonged to a young lady I knew. Her boyfriend at the time had gotten into trouble with the law so she went to the jail to visit him. Somehow, she managed to lose her keys and left the car at the jail. I went there later to hot wire the car to drive it back. Had to explain to the security guard why I was hot wiring a car at the jail.

 

Sorry just can't remember, but I think it was on here and not a station wagon but a coupe or sedan.

 

I'm thinking a hopped up 440/727 combo with rear tires as large as will fit under the wheel wells with black steel rims and poverty hub caps. Guaranteed to surprise an OT racer at the corner of walk and don't walk. But that's JMO. Regardless of how you build it it will be cool. Long roofs rock. Looking forward to photos when you get it home.

 

Very cool Bruce. Hope the deal works in your favor. Merry Christmas.

 

Bruce, very cool wagon, I hope it works out well. What does the 64 have for power? V8 or Leaning Tower of Power? Either one would be awesome. Kinda funny, the older I get, the more I appreciate a fine six.


Sent from my iPhone using The H.A.M.B. mobile app

 

Where do we stand Bruce? HRP

 

Yea, what Danny said. You have us curious now.

 

...Paging @Bruce Fischer over...