Register now to get rid of these ads!

Technical Little tips and tricks for garage hobbyists.

Discussion in 'The Hokey Ass Message Board' started by Ron Brown, Jul 30, 2019.

  1. atch
    Joined: Sep 3, 2002
    Posts: 5,943

    atch
    Member

    People do all sorts of weird things. My father (RIP) did almost everything right handed. Except golf. Did that left handed and pretty well at that.
     
  2. I'm mostly lefthanded but I try to use power tools - especially grinders, drills and saws - righthanded because the lock buttons are made for righthanders. Lefties have a tendency to grip those buttons inadvertently and then get torqued out of our grip when they catch on something and keep going when we've tried to let go of the trigger.
     
  3. Boneyard51
    Joined: Dec 10, 2017
    Posts: 6,597

    Boneyard51
    Member

    That’s me! I am right handed, but give me anything with a handle…I grip it left handed! I found out about this in high school base ball! My coach noticed my left hand grip , but I was on the right side of home plate. So he told me to get on the other side! I could bat equally poor on either side! lol





    Bones
     
    Robdski, Algoma56, 29A-V8 and 4 others like this.
  4. deathrowdave
    Joined: May 27, 2014
    Posts: 4,134

    deathrowdave
    ALLIANCE MEMBER
    from NKy

    Changin hands is like a new date !
     
  5. seb fontana
    Joined: Sep 1, 2005
    Posts: 8,876

    seb fontana
    Member
    from ct

    That would be me also!
     
    29A-V8, Boneyard51, vtx1800 and 2 others like this.
  6. Six Ball
    Joined: Oct 8, 2007
    Posts: 6,433

    Six Ball
    Member
    from Nevada

    I never could figure out left-handed guitar or fiddle players. You are already doing the hardest part with your left hand. I've never see a left-handed accordion player flip one over and play it upside down & backwards.
     
  7. b-body-bob
    Joined: Apr 23, 2011
    Posts: 637

    b-body-bob
    Member

    I used to think that too until I started playing and found fretting is the easy part unless you're just strumming. My two cents is it's all about the picking hand.
     
    29A-V8, Sharpone and RodStRace like this.
  8. Tow Truck Tom
    Joined: Jul 3, 2018
    Posts: 2,688

    Tow Truck Tom
    Member
    from Clayton DE

    Whoa,,, I got the split duty hands too.
    I find that things I was taught ( like baseball ) are right hand.
    Eating and writing lefty, since I taught myself. ( Mom was sick Dad was a drunk )
    But if I need a glove I'll just put it on the hand I need regardless.
     
  9. RodStRace
    Joined: Dec 7, 2007
    Posts: 5,851

    RodStRace
    Member

    29A-V8, Sharpone and b-body-bob like this.
  10. Six Ball
    Joined: Oct 8, 2007
    Posts: 6,433

    Six Ball
    Member
    from Nevada

    Only been playing since I was 7. (72 years) Guess I never noticed. Not very good maybe I'm left handed? :eek: Both hands are screwed up now but I can fingerpick better than I can press strings.
     
  11. RodStRace
    Joined: Dec 7, 2007
    Posts: 5,851

    RodStRace
    Member

    Better than me, I've tried to play a few times over the years and never got past the first few lessons. :(
     
    seb fontana, Six Ball, 29A-V8 and 2 others like this.
  12. lostone
    Joined: Oct 13, 2013
    Posts: 3,247

    lostone
    Member
    from kansas

    My youngest son (24) is ambidextrous, he shoots bow lefty, shoots guns righty, writes with both.

    As a kid I used to love to watch him draw and color, he'd take 2 different color crayons, one in each hand and go back and forth between them coloring his pics.

    My middle daughter is lefty, my oldest boy is right, so I guess the youngest decided to be both....

    ...
     
  13. partssaloon
    Joined: Jan 28, 2009
    Posts: 736

    partssaloon
    Member

    Drill press chuck key, instead of a chain put a magnet on the side of the case, slap the chuck key on it.
     
    jet996, alanp561, Six Ball and 5 others like this.
  14. hrm2k
    Joined: Oct 2, 2007
    Posts: 5,208

    hrm2k
    ALLIANCE MEMBER

    Been a few years since this was posted. I believe this fits the thread
     
  15. Excellent idea, simple and functional.^^^^^^^
     
  16. BuckeyeBuicks
    Joined: Jan 4, 2010
    Posts: 2,729

    BuckeyeBuicks
    Member
    from ohio

    BEEN THERE,DONE THAT!!!
     
    29A-V8, Boneyard51 and Sharpone like this.
  17. choptop40
    Joined: Dec 23, 2009
    Posts: 5,636

    choptop40
    ALLIANCE MEMBER

    me likey....
     
    29A-V8 and Sharpone like this.
  18. BuckeyeBuicks
    Joined: Jan 4, 2010
    Posts: 2,729

    BuckeyeBuicks
    Member
    from ohio

    With enough practice you can manage to gain a stroke, I am told;)
     
    alanp561, 29A-V8 and Boneyard51 like this.
  19. Sharpone
    Joined: Jul 25, 2022
    Posts: 1,618

    Sharpone
    Member

    Good idea, I’ll be building one, the way I do it now I always end up with some on the floor.
    Dan
     
    29A-V8, hrm2k and Boneyard51 like this.
  20. hrm2k
    Joined: Oct 2, 2007
    Posts: 5,208

    hrm2k
    ALLIANCE MEMBER

    We got those bins as a freebie. Blue ones are long and the yellow about 3/4 length. The depths in the bench are set for the size of the bin. If we had it to do over, we would have bought all the same depths.
     
    29A-V8 and Sharpone like this.
  21. atch
    Joined: Sep 3, 2002
    Posts: 5,943

    atch
    Member

    That sounds good at first blush. However, most of us, sooner or later, will misplace the key. With the chain it's impossible to misplace it. Both of my drill presses have a little hole at the back to put the key "handle" in. Again, if that was what I used I'd misplace it occasionally.

    I prefer the chain. The key is always there. Always.
     
    29A-V8, Six Ball, TagMan and 3 others like this.
  22. atch
    Joined: Sep 3, 2002
    Posts: 5,943

    atch
    Member

    20241108_150043.jpg Sandblasted, rattlecanned, and hung over a bench across the shop from the main bench where the rollaround toolboxes are.
     
    Last edited: Dec 30, 2024
  23. atch
    Joined: Sep 3, 2002
    Posts: 5,943

    atch
    Member

    Here is my "tape tree" that I made about 30 years ago. Just a couple of 2x4s with nails in them. Brought it with me 24 years ago when I moved. Everyone that reads this will have a different way to store tape but this works for me.

    20241230_125808.jpg
    20241230_125801.jpg
    20241230_125756.jpg
     
    Rawrench, X-cpe, Six Ball and 8 others like this.
  24. Marty Strode
    Joined: Apr 28, 2011
    Posts: 9,406

    Marty Strode
    Member

    I often wondered how a left handed person could shift 4 speed or a column shift for that matter.
     
    SS327 and Sharpone like this.
  25. The left handed driver holds the wheel on course very steady- no jerking the wheel, just banging gears with the right hand!
     
  26. Sharpone
    Joined: Jul 25, 2022
    Posts: 1,618

    Sharpone
    Member

    Being right handed, if I was left handed and had to shift with my right hand or if I visited a place where they drive on the wrong side of the road and had to shift left handed I’d be grinding gears until they fit.
    Dan
     
  27. Dedsoto
    Joined: Jan 7, 2014
    Posts: 338

    Dedsoto
    Member
    from Australia
    1. Aussie HAMBers

    it's really no different, driven both LHD and RHD floor shift and column shift, what catches me out is indicators and wipers switching sides of the wheel on late model stuff
     
    Tow Truck Tom, alanp561 and Sharpone like this.
  28. RodStRace
    Joined: Dec 7, 2007
    Posts: 5,851

    RodStRace
    Member

    Being left handed in this world means having to adapt. Then consider the automotive-centric space here. Most people will do most tasks with their dominant hand, but will be forced to use the other on certain tasks. V8 spark plugs, is an obvious example. This tends to force you to develop some degree of skill in both hands. Being ambidextrous is not common, but as seen in previous posts, some people switch hit.
    https://www.rd.com/list/facts-ambidextrous-people/
     
  29. Sharpone
    Joined: Jul 25, 2022
    Posts: 1,618

    Sharpone
    Member

    Says you. You can probably walk and chew gum at the same time. Lol
    Dan
     
  30. Any time I use an auto pistol or rifle I'm glad to be right handed. Most every firearm in this category I can think of ejects to the right of the shooter. Plus safe/fire switches, charging handles, and mag release buttons are mostly for right handed people.
    Dad used to say ''if you think you're ambidextrous, try shaving left handed ''. I never did. Don't like bleeding!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.