History Lowered 32 and model a picture thread

Lets see some really low model a's and 32's. Full fendered or High boy!

 

You haven't looked? This place has been going 15 years or so and there are lots of Deuce and A bone threads. In fact there's a model A one in the first half dozen pages or so, plus HRP's current 32 thread.

 

My latest build, also my avatar, 48" tall!! I've got 4" of ground clearance, has not been a problem thus far, over 5,000 miles.

 

2.5" ground clearance... You asked for REALLY LOW! This is Static and driven all over. No bags, no switches, no fat b&#ches....

 

As previously stated,there are several threads showing both Deuces and Model A's.

The trucks front splash apron was a little less than 3' with a lot of dent's and scrapes. HRP

 

No bags, no switches, no fat b&#ches....

THAT MADE ME LAUGH! GOOD ONE.

 

That is perfect!

 

3" to pan

 

I'll play, here's my 29 steel body, glass fenders, mild 350 with a 700 R4, PW, AC

 

That pick up is so cool, building a rhd flathead powered 30 closed cab myself hope it looks half as good as yours when finished.

 

FORD GTA 48 ?

 

4in ground clearance

 

About 4", not enough for a armadillo...

 

Here is mine

 

one more try not as low as some

 

another view?

 

What green is that? What a perfect stance..... I'd give a kidney for that car! [emoji41]

 

Long and low ....

 

So much for "FULL FENDERED" as the OP was asking for ,.... Eh ?

 

Back from my International tour courtesy of our Uncle........ I was/am 6'2"...

 

I am not sure what the name of the green is. the car was already painted when I got it. got a small can of paint for touch up with the car. it is a Limco/Basf Paint. on the can it just says FM-Green stock # 79616 . it is a base coat/clear coat acrylic enamel.. that was not available here in Alaska, but the paint store had it in their catalog in NASON machinery and equipment acrylic enamel. the code on the can reads---Car: BASF Code : 79616 Color: Green that is about all I can tell you. there is a color that is very similar that is a stock model A color ( can't remember the name just now ). a lot of people at first did not like the color, but the more you look at it , it grows on you, at least it does for me. I like it more and more every time I shine it up, especially when the sun is shinning on it. and buy the way for what it cost me I probably could have bought a kidney. was not sure if I was ever going to finish my 29 roadster because of health reasons, so I bought this as a 90% finished project. still working the bugs out of it . was a "new" build when I got it only had 4 miles on the odometer. got almost 400 now. I will keep plugging away on the roadster, I would like to finish it, but being retired and bad back and knees has slowed down the progress. The coupe is all Ford. y-block eng. 9"rear ford trans., 36 dash& gauges

 

Here is my brothers 1928 and my 1929.

 

I think if you look back at the OP's post he say's full fendered or high boy,just saying. HRP

 

And,..... sadly,.... I stand corrected....

 

Here's mine.