Register now to get rid of these ads!

Merc 53 V8/flathead stock runs with truck tranny mounted,with 1917 Hup hot rod project

Discussion in 'Parts For Sale' started by dana barlow, Oct 7, 2021.

  1. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    City: Miami

    State: Florida
    Price: $7000
    Dropped $ 3000,see notes !!;):D

    Very UNIQUE type hot rod/kind of a kit?
    Have cool hot rod project,I'm never going too finish @ 80yo next year for me.
    Very low price is set at $ 4000. Or less if not all.
    Lets talk!
    Merc. Flathead v8 an truck 4s tall shifter tranny < got it as one running unit from a guy that added a 5.0 to his truck,that before him,someone added the Merc. Flathead V8 too truck..
    *****Or make a engine choice>= I can give a Ford OHV "Y" Block V8 with it/not running but turns so good to rebuild,have Ford auto- trans for it also. Or 390FE,or 5.o/302,you pick witch type engine you wish or make offer on one?. I was planning on using the Flathead V8,but its up to you what type engine.
    So with other then flathead V8<I keep it; an you pick any OHV v8
    Asking $3000 ,w OHV V8 an all parts.

    This is something a little out side the box= Extra cool rod when completed your way !!.
    1917 Hup cowel,and dash,tilt windsheild< no glass in it,head lights an stands,pair of arm shocks,38 Ford front axle n 48 spindels n new pins in box,backing plates,new vega steering box ,enouh box tubing for full frame an lot of stuff for build,ect. Doors an rear of cockpit are only drawings,and EZ to fab=Hup was flat sheel metal with simple bends let you make cockpit any size needed for comfort. MUST Pick up Miami*****< no shipping.........Bill of sale for parts. Will run motor if you wish to see/hear. LOt n lots of parts for this project are to go with it ! Extra engines,if interested,make offer.
    Too many parts too take pic of,so here are some high lights. [/ATTACH]
     

    Attached Files:

    Last edited: Jul 26, 2023
    1Nimrod and gary macdonald like this.
  2. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Frame ,,steel box tube 2x3.5 x 1/4in. thick,2 of 16foot +
    upload_2022-1-6_13-45-16.jpeg
     
    Last edited: Jan 6, 2022
    1Nimrod and gary macdonald like this.
  3. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Big savings of both time an $ to hunt this many parts up.
    Plus a very UNIQUE hot rod,too build your way.
    With a OHV V8, asking $2000
    Lets talk.
     
    Last edited: Jan 24, 2022
    1Nimrod likes this.
  4. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Bottom line;
    With OHV engine V8-$2000 for cool hotrod you can build, kind of like a kit,most parts already found!
    Lets talk $,Miami Fla pick -up,305 ----221----4872
     
    1Nimrod likes this.
  5. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    UNIQUE :D Hot rod,too build your way. Kind of a kit almost.
    Or just use the parts anyway ya like.:p
    Engine choice ? Any one of 4 types,SBF 5.0, Ford Y-block V8 w autotranny or for extra $1000,running Ford/Merc.
    Flathead V8 with pic-up tranny {tall shifter}on it.
    Also have 2 big block Fords "FE"s Thunderbird 390's I think,but I don't know about FE's
    Need to move this stuff.;) All or part of.
    Make offer.:cool:
     
    1Nimrod and gary macdonald like this.
  6. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    All,or part,make offer on what you want ?
     
  7. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Super buys here,,,will talk,but you most pick up,if I got box n ship/cost is x3 over all,,, to cover PITA
    Can add 471superchager project for a "Y" into kit type buy. Whit a "Y"engine
     
    1Nimrod likes this.
  8. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    You need this ! or most of it!!!
     
  9. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Do this your own way,or kind of like I had in mind!
    Big save in time an $
    Make offer,pick up in Miami Florida,will help load your,pick-up or trailer,after cash in hand.
     
    1Nimrod likes this.
  10. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    This stuff should be owned n used by some one with hot rod desire,make offer{ I'm not looking for a lot},must be picked up at my home with, at least a pickup truck-
     
    1Nimrod and gary macdonald like this.
  11. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    I'm at 80 yo,now an not ever going to build this.
    Thought I would years back.
    These parts are a super start on a max cool ROD.
    Make offer. 305
    221
    4872. leve massage,if not picked up.
    I will call back if massage is left
     
    Last edited: Dec 13, 2022
    1Nimrod and alanp561 like this.
  12. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Back up !!! :),good buy ,all kept in side garage.
     
    1Nimrod and gary macdonald like this.
  13. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Be a bit out side the box,build with this great set of parts at a low cost,be cool !
    There no way I can do this now at my age an time limits,have fun with it !
     
    1Nimrod likes this.
  14. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

  15. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Get a great start on your next cool rod,or just added some extra zap to what ever your working on.
    Make offer,on what you need
     
  16. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    It took a few years,to find these parts,to build a great hotrod,that could be very cool rod. Do it your way.get the parts at a great low $ n save lots of time also.

    The Ford V8 5.0 is still here,and 2 Big Block Ford FE. V8s Still have a number of other V8 Y- blocks ,all great for rods.
     
    Last edited: Jul 26, 2023
    1Nimrod likes this.
  17. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Lets make a deal on all or parts you like best, Have some Ford Y-blocks an speedparts. Plus other Ford engines/5.0/2 FE T-bird V8s{no T-bird alum covers,I use those.}
    engine1.jpg engine2.jpg
     
    Last edited: Jul 26, 2023
    1Nimrod likes this.
  18. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    All this stuff is harder to find now,plus cost more,I need it sold,ask
     
  19. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    The Ford FE 390s are sold.
     
    Last edited: Dec 10, 2024
  20. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Sold off the Ford 5.0/ 302.
    So still have a number of Ford Y-blocks,an a Ford auto tranny that fits -Y< about a 64 ?
    Hubba hotrod ,still 4 sale.
    [​IMG]
     
    1Nimrod likes this.
  21. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Build your self a hotrod,thats not cookie cutter.
    This 1917 Hup can be super cool,come get it 4 low $s
    Look it over an make offer. with Y-block V8,or Merc FH as power !
     
    bondojunkie and 1Nimrod like this.
  22. dana barlow
    Joined: May 30, 2006
    Posts: 5,412

    dana barlow
    Member
    from Miami Fla.

    Come get it,an make your own wild hot rod.. Save your self a lot of $ n timme hunting cool parts.
    Way more stuff then you think..cash rules:D,ya need at lest a long bed pickup to haul home.
    Going on 84yo,I'm not doing this one,wanted too,but can't !
    Your gain,your way...:cool:
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.