Site Links Affiliated by Skimlinks.
Register now to get rid of these ads!

Technical Might be why it didn’t run well. 235/fenton exhaust/intake plumbing

Discussion in 'The Hokey Ass Message Board' started by anthony myrick, Dec 6, 2025 at 2:04 PM.

  1. anthony myrick
    Joined: Sep 4, 2009
    Posts: 21,017
    Profile Page

    anthony myrick
    Member
    from Somewherin The Twilight Zone dodododo

    I’m no expert expert on hooking this **** up
    But exhaust gas plumbed into a vacuum port doesn’t seem right IMG_0006.jpeg
    IMG_0005.jpeg
     
    Last edited: Dec 6, 2025 at 2:12 PM
    anthony myrick, Dec 6, 2025 at 2:04 PM
    SHARE POST#1
    Ken Smith, Sharpone, winduptoy and 1 other person like this.
  2. Budget36
    Joined: Nov 29, 2014
    Posts: 15,316
    Profile Page

    Budget36
    Member
    from Oakdale, California

    Poor man EGR?

    Bet it didn’t want to idle well.
     
    Budget36, Dec 6, 2025 at 2:45 PM
    SHARE POST#2
    Sharpone and anthony myrick like this.
  3. Moriarity
    Joined: Apr 11, 2001
    Posts: 37,494
    Profile Page

    Moriarity
    SUPER MODERATOR
    from Mound, Mn USA
    Staff Member

    yup intake heat, supposed to be hooked up like this. I bet that one you pictured did run ****py IMG_6834.jpeg
     
    Last edited: Dec 6, 2025 at 3:09 PM
    Moriarity, Dec 6, 2025 at 2:53 PM
    SHARE POST#3
    tractorguy, Sharpone and winduptoy like this.
  4. anthony myrick
    Joined: Sep 4, 2009
    Posts: 21,017
    Profile Page

    anthony myrick
    Member
    from Somewherin The Twilight Zone dodododo

    Guy I bought it from gave up and put stock stuff back on it. Said he bought it this way
    I’ll plumb it correctly when I use it
    The exhaust plates are sold with 2 and a single threaded hole. Wonder why
     
    anthony myrick, Dec 6, 2025 at 3:05 PM
    SHARE POST#4
  5. Moriarity
    Joined: Apr 11, 2001
    Posts: 37,494
    Profile Page

    Moriarity
    SUPER MODERATOR
    from Mound, Mn USA
    Staff Member

    I never ran those. They bark the loudest when the 2 sides are totally separate , hooking that heat plate up lets the 2 mix together and takes the sharp crack out of the exhaust tone....maybe the one with just one tapped hole is for guys like me who want their cars LOUD, only hooked up to one of the headers....
     
    Last edited: Dec 6, 2025 at 3:30 PM
    Moriarity, Dec 6, 2025 at 3:12 PM
    SHARE POST#5
    Sharpone, anthony myrick and winduptoy like this.
  6. Doublepumper
    Joined: Jun 26, 2016
    Posts: 1,816
    Profile Page

    Doublepumper
    Member
    from WA-OR, USA

    Wow...another one to add to the, I've seen it all listo_O
     
    Doublepumper, Dec 6, 2025 at 5:21 PM
    SHARE POST#6
    Sharpone, anthony myrick and winduptoy like this.
  7. Hotwyr
    Joined: Apr 20, 2008
    Posts: 182
    Profile Page

    Hotwyr
    Member
    from loveland, CO

    What Moriarity said. I've never run a heated intake, although some say it's an absolute necessity. Maybe in colder climates and vehicles driven daily.
     
    Hotwyr, Dec 6, 2025 at 6:06 PM
    SHARE POST#7
    anthony myrick, winduptoy and Moriarity like this.

Share This Page

Register now to get rid of these ads!
Top

Archive

Support

Support The Jalopy Journal - Contact Us - Log In

Subscribe

By Email - RSS
-
Our Affiliate Link Policy

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.