Model a door measurement needed

Looking for some measurements on a 31 model a slant window 4 door.

I have no bottom on my doors and just looking for a rough measurement from the bottom of the window to the bottom of the door.

This is the better of my doors

 

There is a corner left on one of the back doors isn`t it?? measure from the belt line to the bottom of one of those doors and it will be the same. Then drop by the shop and look a wiener`s car and see how the bottoms are shaped.

 

Not much left off the rear doors wither... I can make a good guess at it. I figured his car would be different but its the perect time seeing how the doors were off the car.

 

I have a late 31 Murray fordor in storage. I'll try to get over there tomorrow and measure it out for you with some pics. If not Friday then I'll try next week.
Terry

 

about 27.5 inches.

 

I'll see if I can find time this weekend. Dad has a clean original 31 Slant window. I'll try to get some measurements with pics for reference.
Scott

 

8 1/16 from the bottom of the door to the bottom of the lower front door hinge. I figured there'd be no confusion if I used this reference point
(see pic)

or

22 1/2 from the bottom of the door to the bottom of the belt line.

Terry

 

Appreciate the help.

Thanks Jason