Register now to get rid of these ads!

My 60 Elcamino turned fenderless hot rod

Discussion in 'The Hokey Ass Message Board' started by Docfranknstein, Jul 28, 2006.

  1. Docfranknstein
    Joined: Jun 30, 2002
    Posts: 294

    Docfranknstein
    Member

    [QUOTE=41 Dave;Doc, How about some progress/driving video's ? What ever ypu do bring us up to date. Dave, How Ya been? Mark aka Hip and I are looking forward to hitting some shows this year, We intend to get out to the Farmer Boys and hope to meet up with You there and hang out. Here is some progress stuff on the Sonic Needle, I got the carb finger'd out, but still may run the daul Carters and I'm about to polish the other blower and install it, that way I can install the plugs in the oil holes of the one that's on there now, since the show at Gene's I've been working on the cowl vent, I filled in the vents in the center, added a peak in the middle, and covered the windsheild wiper holes with tubbing and added bullets,( see photo) I've also been working on the rear suspension My plan is for air bags back there but for now I'm gonna run cut down coils till I can sort out the plumbing of the Ford bags and pump I've got, I have the car on the lift but will pull it out side in a couple days and take some pix, till then here is a shot from Gene's that I lifted out of WCK's newsletter, and pix of the Camino I got from Gene. Von Doc
     

    Attached Files:

    kiwijeff likes this.
  2. Damn Mike.. As many times that I have walked past that El Camino at the shop , I never really looked at it.. Pretty damn cool.. Maybe it was all the stuff and still life covering it.. I dunno ..

    Needle is looking sharp!! (No pun intended)
     
  3. Zombie57Ranchero
    Joined: Oct 7, 2009
    Posts: 576

    Zombie57Ranchero
    Member

    Hey Leave Rancheros Out Of This! haha :D
     
  4. 23crate
    Joined: Oct 6, 2010
    Posts: 179

    23crate
    Member
    from nz

    slips quietly into the fracar.....

    as a bodyman i can appreciate the amount of work that goes in to a build like this,,,

    there seems to be alot of chat on nose jobs for this .. id just say let Doc do his thing ,, hes done this good so far , the the end is going to create a storm of its own...

    there is vision in this project - amazing work Doc , and if lived in your town id be round to see whats next - often :D
     
  5. hellsgaterods
    Joined: Dec 8, 2010
    Posts: 534

    hellsgaterods
    Member

    kool, i actually like it.
     
  6. bonez
    Joined: Jul 16, 2007
    Posts: 3,487

    bonez
    Member
    from Slow lane

    Great! I love to see the progress on this, loved it since day one.
    The new Elco you got from Winfield is rad too. Do you have any history on it?
    I also never replied to the finned model A post. The rear end treatment is sick.
    Def. love your style.
     
  7. gimpyshotrods
    Joined: May 20, 2009
    Posts: 23,904

    gimpyshotrods
    ALLIANCE MEMBER

    Red wheels?: no.
    Poor construction?: no.
    No floor, or floor made from expanded metal?: no.
    No transmission tunnel?: no.
    Poor quality welds?: no.
    Horribly mis-matched parts?: no.
    Spider webs welded on everywhere?: no.
    Rubber rats?: no.
    Dangerous construction methods?: no.
    Questionable engineering?: no.
    Obscene chop?: no.
    Diesel engine?: no.
    Rat rod?: no.
     
    Scooterville likes this.
  8. HELLVIS
    Joined: Dec 10, 2010
    Posts: 324

    HELLVIS
    Member

    didn't know a diesel engine makes it a rat rod...thats a new one
     
  9. The car looks excellent! I hadn't seen any activity for a while, so it's great to see it active again.
     
  10. bonez
    Joined: Jul 16, 2007
    Posts: 3,487

    bonez
    Member
    from Slow lane

    Anybody callin this a rat rod has no clue whatsoever.
    Sure you cant please everyone, and who gives a crap, but the fact you dont like something doesnt automatically makes it a pile of crap.
    Keep up the good work Doc!
     
  11. SuperFleye
    Joined: Jul 17, 2005
    Posts: 2,054

    SuperFleye
    Alliance Vendor


    Great to see that you got that El Camino Doc! Do you know what the story behind it is?
     
  12. I was wondering about this build. Hey Doc, how's that gas station treating you out there?
     
  13. Stone
    Joined: Nov 24, 2003
    Posts: 2,279

    Stone
    Member

    This is such a great build. Any updates by chance? Any more pictures of the 60 that you picked up?
     
  14. Docfranknstein
    Joined: Jun 30, 2002
    Posts: 294

    Docfranknstein
    Member

    Well, I took the Sonic Needle to the scales, DMV needed a weight cert to complete My reg, the first place I went was the truck stop up the road and the car was to light for them to get a weight on, so then it was off to Lancaster with help from My Buddy Mad Jack( thanks for going along with My crazy plans), the car weighs 2520, now I can finish the reg on this one and take the next one to the scales (Hey Jack what Ya do'in next weekend?), I already have had the Winfeild Camino fired up and it sounds great, My Son T.J. is helping Me with it and We are gonna share the car err truck We will call it the Solar Flare, T.J. is almost done strip'n and prime'n It and We have got it roll'n on wide whites and chrome reverse wheels,and it sits lower now, We will try and take more pix soon. Von Doc
     
  15. burnin53
    Joined: Mar 22, 2009
    Posts: 597

    burnin53
    Member
    from cuba,n.y.


    ....then.......where is your build thread?
     
  16. Carguy1965
    Joined: Dec 14, 2008
    Posts: 168

    Carguy1965
    Member
    from Illinois

    Would love to see some photos of the El Camino from Winfield's!

    Thanks!
     
  17. Docfranknstein
    Joined: Jun 30, 2002
    Posts: 294

    Docfranknstein
    Member

    I've been trying to post photo's, but the attachments box no longer has a box to click, before I would click that box then click manage attachments, but that is gone, what gives? I have been thinkin it was My computer but now I don't think it is, I made a neat set of skirts for the Winfeild Camino but can't post the photo's. what to do? Doc
     
  18. 40FordGuy
    Joined: Mar 24, 2008
    Posts: 2,907

    40FordGuy
    Member

    WOW,....... I'd never have thought those would make a radical custom, when I had mine in '60 !!!!!! Keep us posted,...That is way cool !!!!!!!!!!!!!

    4TTRUK
     
  19. 40FordGuy
    Joined: Mar 24, 2008
    Posts: 2,907

    40FordGuy
    Member

    Truly an original !!!!!!!!!!!!!!!!!!!!!!!

    4TTRUK
     
  20. yetiskustoms
    Joined: May 22, 2009
    Posts: 1,932

    yetiskustoms
    Member

    wow. very roth/ 60s show car vibe.
     
  21. mrconcdid
    Joined: Aug 31, 2010
    Posts: 1,156

    mrconcdid
    Member
    from Florida

    What's up doc?

    How bout some updated pics

    Godspeed
    MrC.
     
  22. Hdonlybob
    Joined: Feb 1, 2005
    Posts: 4,134

    Hdonlybob
    Member

    Reading the title of your post I thought...Hmmmmmm :rolleyes:
    But after looking at the pics...WOW...I really like it, and talk about out of the box...nice job !
    Cheers.....
     
  23. Docfranknstein
    Joined: Jun 30, 2002
    Posts: 294

    Docfranknstein
    Member

    OK My photo posting problem is My puter, I will try and post some new pix with My Daughters puter tomorrow. Von Doc
     
  24. 60galaxieJJ
    Joined: Dec 24, 2009
    Posts: 1,525

    60galaxieJJ
    Member

  25. redlinetoys
    Joined: May 18, 2004
    Posts: 4,302

    redlinetoys
    Member
    from Midwest

    Still subscribed and looking forward to updates. Love the car so far!
     
  26. KustomCars
    Joined: Jul 31, 2011
    Posts: 3,550

    KustomCars
    Member
    from Minnesota

    Sweeeet! Looking forward to updates also!
     
  27. Hey Doc, i need an update. Its been far to long, and this is up there with my fav HAMB builds. I need a fix!
    Still got pic sharing issues? Go get a free photobucket account, and share em from there. Its real easy.
    Cant believe someone refered to this as a rr.
     
  28. t-town-track-t
    Joined: Jan 11, 2006
    Posts: 884

    t-town-track-t
    Member
    from Tulsa

    What ever happened to this car? am I the only one who wants to see it finished???
     
  29. Jay Ess
    Joined: Oct 18, 2007
    Posts: 438

    Jay Ess
    Member
    from New York

    Certainly Not! Thanks for bringing it to the top.

    js
     
  30. 75SSShovel
    Joined: Aug 8, 2012
    Posts: 71

    75SSShovel
    Member
    from Idaho

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.