Register now to get rid of these ads!

My intro: since somebody won't stop bitchin'

Discussion in 'The Hokey Ass Message Board' started by PAPASMURF, Jun 18, 2004.

Thread Status:
Not open for further replies.
  1. I've been lurking here for quite some time, and only recently (as you can see) registered to post. Yes, I have VW's. Yes, I know they are not welcome here. But, I registered so I could PM folks with other interests. I've been around street rods since my brother built his "C-Cab" Model T and a A chassis, with a built flathead engine with Fenton heads, Offy manifold, and 3 Stromberg 97 carbs. I'm building a "composite" car- with a traditional dropped I-beam axle and transverse leaf spring and hairpin radius rods, but on a frame (floorpan, actually) that most of you would not approve of. Yes, I do have respect for a lot of the builders and crafters of cars on this board; they are what I aspire to be. I am NOT repeat NOT trying to convert anyone to my style of car. I've learned a lot from a lot of the posts here, and hopefully will continue to do so. There's been a couple of folks on here that have asked VW related questions, and I have taken the liberty to PM them with answers, in order to keep that brand of car content to a minimum on this board.
    If anyone wants me to log-out and go away, I can do that, as well. But I'll still be "lurking and learning"... [​IMG]
     
  2. RaggedyRacing
    Joined: Mar 6, 2004
    Posts: 77

    RaggedyRacing
    Member
    from UK - SW

    [ QUOTE ]
    I've been lurking here for quite some time, and only recently (as you can see) registered to post. Yes, I have VW's. Yes, I know they are not welcome here. But, I registered so I could PM folks with other interests. I've been around street rods since my brother built his "C-Cab" Model T and a A chassis, with a built flathead engine with Fenton heads, Offy manifold, and 3 Stromberg 97 carbs. I'm building a "composite" car- with a traditional dropped I-beam axle and transverse leaf spring and hairpin radius rods, but on a frame (floorpan, actually) that most of you would not approve of. Yes, I do have respect for a lot of the builders and crafters of cars on this board; they are what I aspire to be. I am NOT repeat NOT trying to convert anyone to my style of car. I've learned a lot from a lot of the posts here, and hopefully will continue to do so. There's been a couple of folks on here that have asked VW related questions, and I have taken the liberty to PM them with answers, in order to keep that brand of car content to a minimum on this board.
    If anyone wants me to log-out and go away, I can do that, as well. But I'll still be "lurking and learning"... [​IMG]

    [/ QUOTE ]

    Amen to that [​IMG]

    did someone mention 'naziwagons'? [​IMG] reminds me of when some guy called my bug a 'nazi staff car' because his girlfriend was eyeing up my beetle [​IMG] bear in mind that i am a 6'5" 18 stone skinhead and at the time was carrying a louisville slugger behind my seat, and a blank firing glock 17 [​IMG] [​IMG] - but instead of violence, i thought it'd be more educational to whup his mundane-o with a 30year old car....

    [​IMG]
     
  3. 46stude
    Joined: Mar 3, 2004
    Posts: 1,718

    46stude
    Member

    It wasn't the VWs that got the HAMB boys ticked off, it was the crappy intro title & a-hole attitude the guy came in here with. Why the Hell should anyone here welcome an a- hole who does an intro so "somebody will stop bitchin"? Its no wonder he got the "go the fuck away" reception. I don't think anyone here wants to run off someone willing to listen & learn. Attitude is everything. I ain't saying new guys should kiss ass- just don't come into Ryan's garage w/ a friggin' chip the size of a bowling ball on yer shoulder.
     
  4. Mass Butcher
    Joined: Sep 3, 2003
    Posts: 361

    Mass Butcher
    Member

    Phew, glad my intro came and went with no backlash, of course i didn't insult the entire board or say I like VW's either. [​IMG]
    To me VW's are like big women.......Or was that mopeds and big women??
     
  5. BigDdy31
    Joined: Jul 31, 2002
    Posts: 1,003

    BigDdy31
    Member

    [ QUOTE ]
    and a blank firing glock 17 [​IMG] [​IMG]
    [​IMG]

    [/ QUOTE ]

    Pray tell, what does one do with a blank firing Glock 17? Pretend to shoot someone? It sounds like having a cut-away demonstration engine in a hot rod. [​IMG]

    Or is it like in that Guy Ritchie movie where the two guys have guns that say 'replica' on the side? LOL

    Not tryin' to jerk your chain, just curious about what a fella does with a gun that don't shoot.
     
  6. ONE: isn't pulling a "blank firing Glock" on someone a good way to find yourself dead?

    TWO: WHY THE FUCK IS THIS STILL ON PAGE ONE?!!
     
  7. Danny909
    Joined: May 28, 2004
    Posts: 52

    Danny909
    Member

    since this post is about shot i guess i'll put in my two pesos.
     

    Attached Files:

  8. hotrodladycrusr
    Joined: Sep 20, 2002
    Posts: 20,765

    hotrodladycrusr
    Member

  9. Nads
    Joined: Mar 5, 2001
    Posts: 11,867

    Nads
    Member
    from Hypocrisy

    Hey I shoot blanks, you assholes.
     
  10. BigDdy31
    Joined: Jul 31, 2002
    Posts: 1,003

    BigDdy31
    Member

    [ QUOTE ]
    ONE: isn't pulling a "blank firing Glock" on someone a good way to find yourself dead?


    [/ QUOTE ]

    It sure as hell is in my house. LOL
     
  11. RaggedyRacing
    Joined: Mar 6, 2004
    Posts: 77

    RaggedyRacing
    Member
    from UK - SW

    ha haahaha [​IMG]

    fuck only knows what i was doing with it! (also bare in mind i was 18 and this in in britain, not dodge city USA like you muthaphuckas, weapons aren't exactly easy to come by)

    i am 99% intimidation after all [​IMG] [​IMG]
     
  12. Paul
    Joined: Aug 29, 2002
    Posts: 16,710

    Paul
    Editor

    [ QUOTE ]
    i am 99% imitation after all

    [/ QUOTE ]
     
  13. Danny909
    Joined: May 28, 2004
    Posts: 52

    Danny909
    Member

    it will more than likely get your ass beat even harder, or pistol whipped harder by the perp your up against!
     
  14. SIXOCAD
    Joined: Mar 18, 2004
    Posts: 113

    SIXOCAD
    Member

    I have a request now that this post is back on the first page again. Can we stop responding to it so it goes away? Please... Nine pages wasted talking about this guy?
     
  15. Morrisman
    Joined: Dec 9, 2003
    Posts: 1,602

    Morrisman
    Member
    from England

    [ QUOTE ]
    since this post is about shot i guess i'll put in my two pesos. [​IMG]

    [/ QUOTE ]



    Ah, so THAT is what a blank-firing-Glock looks like [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.