Register now to get rid of these ads!

New guy from the Ottawa Valley (Ont,CDA)

Discussion in 'New to the H.A.M.B.? Introduce yourself here!' started by Ferguson777, Mar 11, 2008.

  1. Ferguson777
    Joined: Mar 4, 2008
    Posts: 56

    Ferguson777
    Member

    Bob Ferguson from the Ottawa Valley (eastern Ontario), CDA. In my early 50s – been into hot rods since I was 13. Had tons of vehicles over the years including 55 Chev Sedan delivery, 49 Ford w/flat head V8 w/offy intake, 38 Plymouth, 48 Chev coupe w/350-350, 46 Dodge p.u Bob …. plus a few V-Dubs including a Karman Ghia and a double cab transporter. :eek:
    Currently building a 54 F100 mild custom (list of mods as long as your arm). Have been a regular on the FTE site for about 4 years but have lurked here a little bit off and on.

    My preference leans to mild customs – chopped tops, nosed, decked, frenched, very little chrome….subtle body mods. Love 48 to 51 GM fast backs and sedanettes (and 53/54 Studes) but the 54 F100 will likely be my last build ……

    Later,

    :cool:
     
  2. Hotrodbettie
    Joined: Jun 14, 2007
    Posts: 122

    Hotrodbettie
    Member
    from Arlington

    hey there! Welcome!!!!!!!!!!
     
  3. screwball
    Joined: Mar 5, 2001
    Posts: 1,763

    screwball
    Member

    welcome from more eastern Ontairo so you have been around a bit do you remember Valley Classics and Ottawa Street Rods run up in Almonte?. Got any pics of your domestic stuff see if I reconize any of it.
     
  4. Ferguson777
    Joined: Mar 4, 2008
    Posts: 56

    Ferguson777
    Member

    Screwball,

    Although I'm only 6 miles from Almonte, I havn't been to their show in years. We have a pretty good one here in Carleton Place around 6/25 every year - about 350 vehicles and I always do Merrickville. I try to do cruise night in Kanata 2 - 3 times every year, but other than that just hang with the boys here in C.P. at their "cruise" night.

    Mine is still 2 years from being road worthy. Got a long way to go.....:(
     

    Attached Files:

  5. Ferguson777
    Joined: Mar 4, 2008
    Posts: 56

    Ferguson777
    Member

    Here's a better shot of it -
     

    Attached Files:

  6. hi Ferguson 777;
    welcome aboard from down by London, On..The home of Nostalgia drag racing..(ONDR)
    I used to hang out at the FTE site, but sold the F100 several years ago.
     
  7. graverobber63
    Joined: Sep 8, 2004
    Posts: 4,134

    graverobber63
    Alliance Vendor

    Welcome from Nepean!
     
  8. 52 csb
    Joined: Mar 14, 2008
    Posts: 429

    52 csb
    Member

    What are you running in yur truck eh
     
  9. Ferguson777
    Joined: Mar 4, 2008
    Posts: 56

    Ferguson777
    Member

    What am i running for a drivetrain, you asked?

    1990 5.0L with an AOD.

    Mildly warmed up - Truck intake with spacer and cam for low end torque. Ported and polished intake and heads plus windage tray and roller rockers for efficiency. Shorty headers and a shift kit. While the engine runs SD-EFI, I am using a harness from the Detail Zone with the early Mustang ECU to fire it sequentially rather than batch or bank fire.

    Certainly not a powerhouse but at $4.50 plus per gallon and the new, serious penalties for what they now term street racing, those days are gone. :(
     
  10. Welcome from West Georgia.
    Cooter
     
  11. cammer427
    Joined: Jan 17, 2009
    Posts: 83

    cammer427
    Member
    from Canada

    Hi Bob, I'm from the Ottawa Valley as well. Good to find more HAMBers from my neck of the woods!
     
  12. Chief 53
    Joined: May 25, 2009
    Posts: 5

    Chief 53
    Member
    from Canada

    Hi Bob
    Welcome from Stittsville
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.