New old stock,Kearney heads

I have recently acquired several sets of Kearny cylinder heads fitting 1933-34 and 1935-36 Ford V8’s. I bought them for a pretty decent price and want to pass them on in the same way. They currently cost around $1600+ for a set. I am selling them for $1250 including shipping to lower 48. If you need a set of heads for your flathead, then these are for you. It’s not likely you’ll find any new heads for this low price again. Ask anyone who knows Kearny heads and they’ll tell you these are great heads. If you’re doing a restoration, then you need these heads.You can contact me at lowride@hotmail.com if you have any questions or want to order a set(s) of heads. Currently the heads will be shipped from Maine, until I get a chance to relocate them back to my home inVirginia. I am not a dealer, just a guy in the right place at the right time, passing on a good thing.
Note; the 33-34 heads are numbered correctly but do not have the (ford) script on them. Non script heads were correct for both 33 and 34. I believe the script was only on later 34 heads. These heads are machined for domed pistons, use with flat topp pistons will result in lower compression.
I will also have available a few sets of reproduction "Bohnalite" aluminum racing heads. The originals were used on the Ford 1934 Indy car entry. A nice touch for a vintage rod. Photos available upon request.