Register now to get rid of these ads!

History NHRA Junior Stock

Discussion in 'Traditional Hot Rods' started by colesy, Aug 12, 2007.

  1. The66GSNut
    Joined: Mar 31, 2010
    Posts: 30

    The66GSNut
    Member

    Actually we are building the 65 Skylark Gran Sport tribute car that was from Reynolds Buick.... Pete Reynolds is still there and Don his son is too... we are building the car and it will be on display at Reynolds Buick in West Covina in Oct 2010 ..if all goes well.. Spencor lyons is around we have talked to him too..and hopefully waiting on a color photo of the 65 GS that Pete Reynolds rolled and totaled coming home from the race track on a slippery off ramp off the I 5 in 1965. I can post some pics of the car if you would like to see... Don and Pete are very excited about this project it should be one hell of an event !!
     
  2. Chuck Norton
    Joined: Apr 23, 2009
    Posts: 775

    Chuck Norton
    Member
    from Division 7


    Sounds like a marvelous affair has been planned. I'll walk over there and check it out.

    Thanks,

    c
     
  3. Paul Ceasrine
    Joined: Mar 31, 2010
    Posts: 387

    Paul Ceasrine
    Member
    from Wilton, CT

    Jimmy,
    I'll try posting the photo again. Can hardly see info on car, but looks
    like Lazar or Laser Auto Sales.
    Also, in 1966 at some AHRA tracks, they permitted dual-carb set-ups (factory kits)
    to be utilized in stock class. AHRA would just re-factor the HP. Check out Detroit Dragway photos.
    66' Buick GS with dual-carb set-up (#Y48 code from the 425 Wildact) running in C/SA
    versus a Holley-carbed 66' Mustang 289 HI-PO K-Code car. Both would normally run
    in D/S.
    Paul
     
  4. The66GSNut
    Joined: Mar 31, 2010
    Posts: 30

    The66GSNut
    Member

    C,
    I will let you know when it happends...

    J

    I will get some pics posted of the restoratoin



     
  5. The66GSNut
    Joined: Mar 31, 2010
    Posts: 30

    The66GSNut
    Member

    Paul...I couldnt find the Dertriot Dragway pics..is there a web site or a link?..yeah see if you can load that canadian one up too!!



     
  6. POPSTAGE2
    Joined: Jan 23, 2008
    Posts: 70

    POPSTAGE2
    Member
    from Wisconsin


    C,
    "So far" we plan on being there with Pop's original Kenne-Bell/Reynolds Stage2 test car.
    Do you recall this car?

    Sorry for being a little O/T...

    Then...
    [​IMG]

    Now...
    [​IMG]
     
  7. The66GSNut
    Joined: Mar 31, 2010
    Posts: 30

    The66GSNut
    Member

  8. Chuck Norton
    Joined: Apr 23, 2009
    Posts: 775

    Chuck Norton
    Member
    from Division 7

    Yes. It was a commonly seen at local strips. I seeing it often at OCIR.

    c
     
  9. Motor Wheel Spyders. :D Buick should have installed these wheels from the factory! Great original design. Hardly anything before or since has looked as good.
     
  10. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    Cool-looking wheels but heavy as heck as I've been told. That's okay, I'm a "form over function" guy (most of the time) and would mount 'em on my car if I had a set!

    Pete
     
  11. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    [​IMG]

    If I had to guess, I'd say this is Englishtown, NJ.

    Pete
     
  12. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

  13. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    Can anyone I.D. this Poncho?

    [​IMG]

    Pete
     
  14. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

  15. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    I've seen pictures of this car before but don't have an I.D. who this is?

    [​IMG]

    Anyone?

    Pete
     
  16. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    Another unidentified flying stocker. :) Maybe you Left coast boys can I.D. him.

    [​IMG]

    Pete
     
  17. Paul Ceasrine
    Joined: Mar 31, 2010
    Posts: 387

    Paul Ceasrine
    Member
    from Wilton, CT

    Hey Pete,
    Again nice stuff (Attic gifts?)
    That Brainbeau Olds 4-4-2 in B/S, looks like 1967. Is that the one Doc Burgess
    from up our way got in 1968, and ran in D/S. Re-painted white, and lettered
    'Black Arrow'?
    He beat that 400 engine to death, before selling it.
    PC
     
  18. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    Nah, Paul...just "web finds." :)

    Pete
     
  19. Paul Ceasrine
    Joined: Mar 31, 2010
    Posts: 387

    Paul Ceasrine
    Member
    from Wilton, CT

    Pete,
    One more thing.
    The 1966 photo.
    That little 65' Plymouth Signet 273 behind Jere Stahl's car.
    The hardtop Signets were 100lbs. heavier than the V-100/V-200 cars.
    The 273/235HP Signets ran in F/S, the 235HP V-Series ran in the more competitive E/S.
    Look at that Signet, no exterior side mirror, no radio antenna, and probably
    heater delete. Trick lightening for 1966. Well, maybe he kept the heater in the car,
    Valley Motors located in Altoona, Pa. Winter came early in that town.
    Wonder if Jere got the idea to run a 66' Valiant 273/235HP by looking at that car near him.
    You know, they are very beautiful. Another one of those cars that does a 360 around the
    'ugly meter'.
    PC
     
    Last edited: Jun 21, 2010
  20. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    Paul, you're a very good detective and historian. Keep it up!

    Best regards,

    Pete
     
  21. 56sedandelivery
    Joined: Nov 21, 2006
    Posts: 6,695

    56sedandelivery
    Member Emeritus

    I always thought the Motor Wheel Flys' were very light weight, as in "fly"-weight.Anyone? Butch/56sedandelivery.
     
  22. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    Oh yes, the Motor Wheel Flys were lightweight, especially the magnesium versions of those wheels as seen on Glidden & Allen's, Gapp & Roush's, Richie Zul's, etc. Pro Stockers of the mid-1970s. The Spyders--just the opposite. Still, they look cool!

    Pete
     
  23. P426
    Joined: Mar 28, 2009
    Posts: 1,023

    P426
    BANNED
    from New Jersey

    One more pic for tonight...

    [​IMG]

    Pete
     
  24. Don't know if the Flys were any lighter than the Super Tricks but I would pick them over the Cragars anytime just for looks!:D
     
  25. OLD-OLD TIMER
    Joined: Aug 25, 2009
    Posts: 38

    OLD-OLD TIMER
    Member
    from indiana

    Picture 6701
    Looks like Dragway 42 West Salem Ohio
    Maybe a Anderson Pontiac car That Indian chief on the rear quarter
    looks like the one on the 62 tempest SD

    old-old timer
     
    Last edited: Jun 21, 2010
  26. The66GSNut
    Joined: Mar 31, 2010
    Posts: 30

    The66GSNut
    Member

    I'm thinking its New England Dragway... I met the guy that raced that car...there is a clone built but..the original car was found by the man who raced it a few years ago...I hear he is selling it...didnt want to finish the restoratoin.
     
  27. Paul Ceasrine
    Joined: Mar 31, 2010
    Posts: 387

    Paul Ceasrine
    Member
    from Wilton, CT

    Brainbeau Olds loved New England Dragway,
    Great pictures of them running against Bob Gaudreau in the C/S 66' GTO 'Tin Tiger'
    sponsored by 'Paul Dodge Pontiac'
    (2) Tri-carbed GM cars.
    Then in 67', in B/S with the single-carbed 400' GM-engines.
    Roy Hill, one of the first Pro/Stockers to market Motor Wheels, on his 70'
    Pro/Stock Duster.
    Hey Pete,
    Whats with that 65' 289 Falcon running in B/S. The only way he could have run that, if it was a 289/271HiPo. Only 7 of them were made, all in Canada. Unless he just
    did a home remedy.
    PC
     
    Last edited: Jun 22, 2010
  28. BadNews
    Joined: Dec 7, 2009
    Posts: 96

    BadNews
    Member

    All the front Fly wheels were magnesium and all the rear Fly wheels were
    aluminum. They were the "fly weight" wheels of their time. I'm not sure about the Spyder wheels though. Never cared much for them. Just a personal opinion. No offense intended. Don't look too bad on the rear of some vehicles, like this Buick.
     
  29. biscaynes
    Joined: Mar 16, 2008
    Posts: 1,647

    biscaynes
    Member

    great picts pete, another 327/350hp '66 chevy II, similar to jenkins A/Stocker.
    car has been restored to it's prelettered condition. saw it featured in 1 of the car mags in the last few years, my CRS won't let me remember which one though.

    [​IMG]
     
    Last edited: Jun 22, 2010
  30. Paul Ceasrine
    Joined: Mar 31, 2010
    Posts: 387

    Paul Ceasrine
    Member
    from Wilton, CT

    Biscaynes,
    The little red caboose was out of Waterloo, New York.
    Mac-Merrit Chevy-Buick sponsorship out of Geneva, NY
    Don't think anybody could figure out what was in that post car at first.
    Big complaint, were those skinny baloney-skin front tires really legal!
    PC
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.