Register now to get rid of these ads!

Technical No Name Headlights???

Discussion in 'Traditional Hot Rods' started by Crew Chief, Mar 19, 2026.

  1. Crew Chief
    Joined: Jan 28, 2020
    Posts: 146

    Crew Chief
    Member

    He you all, a friend of mine bought my 34 Ford Pickup project a few years ago and finished it pretty quick. He did not use the lights I found at a swapmeet and instead went with Guide 682 lights. Do any of you know who made these? There are no markings on it except SAE. They are not cone shaped like the 682s. They are flat like a skillet on the back side. Unique and I have never seen another pair like these since. I think he may want to sell them but not sure yet. If you all know who made them, or what they went on, please let me know.
    Thanks
     

    Attached Files:

    41 GMC K-18 likes this.
  2. alchemy
    Joined: Sep 27, 2002
    Posts: 23,057

    alchemy
    ALLIANCE MEMBER

    Show the mounting bracket on the bottom, and the way the ring is attached.
     
    41 GMC K-18 likes this.
  3. Crew Chief
    Joined: Jan 28, 2020
    Posts: 146

    Crew Chief
    Member

    I don't have access to the lights but if I remember they were just like the Guide type. I'll see if I can get a photo tomorrow.
     
    41 GMC K-18 likes this.
  4. Crew Chief
    Joined: Jan 28, 2020
    Posts: 146

    Crew Chief
    Member

    Here are some more photos of the headlight buckets to see if someone came figure out who made them or what they were used on.
     

    Attached Files:

  5. Tow Truck Tom
    Joined: Jul 3, 2018
    Posts: 3,617

    Tow Truck Tom
    ALLIANCE MEMBER
    from Clayton DE

    If I had to commit to guess, I'd look toward a commercial large hauler
     
    Crew Chief likes this.
  6. alchemy
    Joined: Sep 27, 2002
    Posts: 23,057

    alchemy
    ALLIANCE MEMBER

    Pretty sure the screw tab ring attachment is not Guide/BLC. But the upper bulb housing sure has their style.
     
    Crew Chief likes this.
  7. goldmountain
    Joined: Jun 12, 2016
    Posts: 4,923

    goldmountain

    Why would it matter what they came from? If a 7" seal beam fits, use them.
     
    dirt t likes this.
  8. rusty valley
    Joined: Oct 25, 2014
    Posts: 4,428

    rusty valley
    Member

    Some Guide buckets have the name stamped into the bucket instead of tags rivoted on. Look close at the rear center
     
    Crew Chief likes this.
  9. Crew Chief
    Joined: Jan 28, 2020
    Posts: 146

    Crew Chief
    Member

    The owner is not on the HAMB but plans to sell them probably on Market Place, therefore wants to describe them the best he can.
     
  10. Crew Chief
    Joined: Jan 28, 2020
    Posts: 146

    Crew Chief
    Member

    I'll have him check it out.
    Thanks
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.