Register now to get rid of these ads!

oklahoma chrome plating "larrys plating"

Discussion in 'The Hokey Ass Message Board' started by slider, Feb 16, 2005.

  1. slider
    Joined: Oct 9, 2002
    Posts: 29

    slider
    Member

    Anyone here from Oklahoma know what happened to larrys plating. Had some parts there and he closed up I guess. The parts where home made so no great loss but I'd still like to get them if I could. BTW anyone know of a good chrome shop in sw Oklahoma or northwest Texas?
     
  2. polisher
    Joined: Jul 28, 2002
    Posts: 651

    polisher
    Alliance Vendor

    And another one bites the dust !!
    We're getting fewer and farther between.
    Best of luck on your parts.
    Don't know anybody in Texas, closest I'd recommend is Advanced in Nashville Tn.
    They are pretty good.
     
  3. Larry T
    Joined: Nov 24, 2004
    Posts: 7,921

    Larry T
    Member

    Slider,
    I'm right across the river from you in Vernon. Was Larry's in Lawton?
    As far a Platers go, a lot of folks here like Show and Go in Dallas. I'm sending a batch of Panhead parts to Houston to be plated at Speed & Sport. I've heard some pretty good things about them, I'll let you know how it turns out.
    Hope you get your parts back,
    Larry T
     
  4. asillymick
    Joined: Oct 7, 2003
    Posts: 151

    asillymick
    Member
    from OKC

    How big of stuff are you wanting to plate? I guy up the street from my called Diversified plating told me he stands behind all of his work. He just can't do bumpers. He even said that replating pot metal is no big deal. Look him up it is on OKC on Penn and Main Street.
     
  5. slider
    Joined: Oct 9, 2002
    Posts: 29

    slider
    Member

    I"m makings some nerf bars for the front of my 46 pick up need that chromed and the handles for the hood if i can find another one. Any chance you have a phone# or address?
     
  6. deadelvis
    Joined: Aug 28, 2003
    Posts: 116

    deadelvis
    Member

    There's a new shop in Mannford, OK that I've heard is doing great work. I was told he had a big set up and could plate just about anything size wise. I don't know the name of the shop but it's a small town. I'm sure a quick phone call to city hall would get you a number.

    Again I don't know first hand but I've sure heard a lot about the guy in the last couple of months.
     
  7. CURIOUS RASH
    Joined: Jun 2, 2002
    Posts: 9,635

    CURIOUS RASH
    Classified's Moderator


    Slider,

    Haven't seen you on here in a while. Sorry to see you're still in Altus!;)

    You need to hook it over to Flat-Top Bobs in Wellington Texas. Just do it before the ticks kick it up again.

    I had my grill re-chromed here in Tulsa but that dude is gone now also, so I'm no help.

    DeadPelvis, you OUTSIDERS takin care of OUR boy Weef?

    Don't************* over there!

    RASHY
     
  8. asillymick
    Joined: Oct 7, 2003
    Posts: 151

    asillymick
    Member
    from OKC

    Here you go Diversified Plating Ltd
    Phone: 405-236-0545
    2109 W Sheridan Ave
    Oklahoma City OK 73107-7035
    He had a 53 Chevy grill that he had just got done and it was purty! Better then some of the***** I have seen come outta bigger shops.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.