ol skool rodz #5

[ QUOTE ]
Jason, I am trying to get my post count up, plus I need some excitement in my life. I appreciate your support bro.
Jimmy White

[/ QUOTE ] 118 posts..... you need to get out of the shop a little more.....I'll drive my pile up when its done and check out the shop.....and no I wont trade it for your coupe

 

[ QUOTE ]
[ QUOTE ]
Is Bo Huff in this issue?

[/ QUOTE ]

How come I never heard of that guy until the OSR crew started hanging from his sack?

[/ QUOTE ]

Maybe coz you've had your head up your..... err, you haven't been paying attention.

[ QUOTE ]
The way they tell it youd think the guy was Ed Roth or Barris.

[/ QUOTE ]
Hell I live a bazilion friggin miles away with a whole ****load of water in between no les and not only do I know who bo Huff is, I know his cars are a lot better looking that much of what's come from the Barris shop since 1960.

But then again I also know who Buick59 is, so i guess that just makes me a friggin smart****!

 

[ QUOTE ]

Now, I'm not saying I dig everything that is contained in OSR but personally I think it is one of the better mags for traditional rods/customs readily available that is affordable.

[/ QUOTE ]
I'll second that.
[ QUOTE ]
OSR unfortunately gave itself a reputation by running two consecutive issue's with Bo Huff vehicles in them and now the mag has been labeled. I didn't like it too much either,

[/ QUOTE ]
I quite appreciated it, but that's coz I'm a long way away and the last time I saw those cars one was partly built and the other still sitting in a feild. So I was kinda chuffed to see how they turned out and I'm looking forward to seeing more.

I love Barris Bros stuff but agree with Buick59's comment in respect of the overexposure of the Barris Shop and the cars built there.

[ QUOTE ]
Not only that but if someone doesn't like the magazine they don't need to buy it or read it.

[/ QUOTE ]Amen Brother!

 

[ QUOTE ]
but you know that there are 50 guys on this board who can build cars better in their sleep...

[/ QUOTE ]
So how come they aren't being featured in any of the magazines I read?

[ QUOTE ]
and to talk about grammar: OL SKOOL RODZ... gimme a ****ing break...

[/ QUOTE ]
Sure beats the **** out of "STREET ROD BUILDER".

 

[ QUOTE ]
****ing OSR, what a blight huh?
A bunch of inbred yahoos, that's what they are, I bet you guys could put out a much better magazine.
I'll sit back and wait.

[/ QUOTE ]Geez Nad's i hope yer not hangin by yer nuts waitin fer that to happen.

 

[ QUOTE ]
i wanna see a WACKY **** centerfold !!!!!!

[/ QUOTE ]

Nekkid and hangin by his nuts!

That's sure to have these guys yellin, "Bring Back Bo Huff!"

 

[ QUOTE ]
Why hasn't anyone mentioned the fact that Mike's photography work is raising the bar as to the graphic content of the mag?

[/ QUOTE ]
Coz that's nowhere nere as much 'FUN' as ****canning another man's hard work or the guy himself for simply defending his work. Man, imagine what a great ****fight could be had here if a few others knew how to drive a Kodak as well as Mike and submitted their stuff for publishing.

 

[ QUOTE ]
i'm staying out of this one...

[/ QUOTE ]

I wanted to, but need to increase my post count in order to catch up with Jim A and earn my promotion to 'Old Skool HAMBer.'

 

[ QUOTE ]
On the subject, I managed to take a look at American Rodder the other day, issue with the rat rods of Paso feature, what a **** magazine its become,

[/ QUOTE ]

Pleeeeese, don't get me started on that. My biggest fear is they've bought back Rodder's Digest only to screw it up the same way.

 

[ QUOTE ]
Nothing wrong with loving that stuff, but don't make anything with shiny paint the enemy.

[/ QUOTE ]

****, with no windows or s***ched in upholstery and shiny paint on one side, primer on the other, I feel like a crossdresser?

And I haven't yet decided if it's finished or not.

 

damm Carps!!!!!!! You ben drinkin some coffe or what?!?!?!?!

Am I goona see ya at the Salt this year? Also Here is a pic of one of Bo's latest. I dunno If it will get finished.....the customer has run out of money.....and Bo is having to lay some people off at the shop.

 

another for Carpy!

 

Holy **** Mike!! Is that RoseBobs merc?? That looks awesome coming from a guy in Utah who builds ugly cars..

Jimmy whats up from slc, anytime you want to fly me out I will will work for a week. hell I will sweep floor in your shop just to learn some more skills....

"Jason, I am trying to get my post count up, plus I need some excitement in my life. I appreciate your support bro."

thats some funny ****..

 

[ QUOTE ]
damm Carps!!!!!!! You ben drinkin some coffe or what?!?!?!?!

[/ QUOTE ]
Busy week, running on adrenalin.

[ QUOTE ]
Am I goona see ya at the Salt this year?

[/ QUOTE ]
That's still the plan, lookin shaky but still the plan.

[ QUOTE ]
Also Here is a pic of one of Bo's latest. I dunno If it will get finished.....the customer has run out of money.....and Bo is having to lay some people off at the shop.

[/ QUOTE ]
MAN! That puppy looks ****** awesome! Hope I can make it to the shop to check it out if'n I do get to B'ville. Hey, if ya see Bo, tell him his package is still here all ready to roll, all I gotta do is get offa my **** and get it to the post office. It's kinda grown from what it started as, but there's some stuff in there I know he'll appreciate and it'll fit his collection of other weird and kool stuff.

Mebbe, I need to hand deliver it?

 

[ QUOTE ]
another for Carpy!

[/ QUOTE ]
AWE **** man, now look what ya done, ya made me piss in my pants!

 

Good lord carps, you've got some pent up energy up inside you dude. Are you sure you're not a hummingbird?

Lemme tell you something, I think Rodder's Journal is the pinnacle of automotive publications but I sat down to read it last night and it's full of mistakes.
In fact there's a disclaimer on the editorial page of an enormous spelling mistake from the previous issue.
Kudos to them for admitting fault but you're gonna have to repeat this for the next issue.
We all make mistakes, when OSR does it it's painful, but nowhere near as much as when Rodder's Journal does, because they are, and should be held to a higher standard.

In fact all of the magazines on the stands that generally cater to us have mistakes in them, feature cars withstanding.

There's no excuse for shoddy wordmanship, pay attention will you?

Hey Mike, that car above just made me pee.

 

You know you have a pretty good life,if stuff like OSR are annoying you?

 

Another loud-mouth jack*** newbie bites the dust. Next!

 

I love "Ol Skool Rodz" They have put my punk *** 'lil brother up there on the cover with heavy hitters like JJ, Steve Bonge, & Bo Huff. Anybody bad mouthing a Magazine that would do that, and puts down my esteemed colleauge: Mr. James White, has no business here.

 

[ QUOTE ]
If ignorance and bliss ruled, your comment would make you king!!! Maybe you should think before you speak! What gives you the right to p*** judgement on SLC, or anywhere for that matter? Have you ever lived here?


[/ QUOTE ]

Someone needs to cool down! It was a ****ing joke! If I got that mad everytime someone poked fun at New jersey I would have a ****ing heart attack.Some folks are just way to serious!

 

"Anybody bad mouthing a Magazine that would do that, and puts down my esteemed colleauge: Mr. James White, has no business here."

thats right, I forgot that Har**** owned this place and has the right to tell everyone who stays and who goes.

Reality Check, It is just a magazine. You guys are acting like someone ****d your dog and killed your wife. Most of you should be worried about the rusty hulk that hasnt moved from your driveway in two years then about an opinion that you dont like.

Jeeeez Get a life.

 

You might want to double-check that yourself...our OnionVille buddy went above and beyond the magazine rant to throw personal accusations at someone many people, obviously including myself, know and respect very well. Has nothing to do with any magazine anymore. And last I checked, the only rusty thing sitting in my drive is the fender off my Panhead--want it?

 

I'll take it , what's it look like ?

 

****...unless you like bobbed FL fenders that weigh 30 pounds (seriously) with a license/taillight bracket welded on underneath?

 

I think Slamchop is a *** and just trying to get a rise outta everybody... maybe he should make his own mag???? Nah his wife wouldnt let him :}

-Bigdaddy

 

[ QUOTE ]
I think Slamchop is a *** and just trying to get a rise outta everybody... maybe he should make his own mag???? Nah his wife wouldnt let him :}

-Bigdaddy

[/ QUOTE ]What BIGBABY??? whos tryin to get a rise?,and how did I put down the mag?I like the mag,my point is if you a have a rod you bought and did not build it than say that.....other guys are just talkin ****.....just like you are right now.....tough guy

 

the diffrence is ill come over and talk it to your face.. you owe me money pay up chump....... I did like the ***** in the front pages on your old truck... and you should be happy no one knows jason sharp.. they know billy lane.. so you got a truck you built in a mag.. you should be happy.. and we all know the real price of the build $3800.00 you just pumped him dry for the 12,000 he said it took to build it

-Bigdaddy

-Bigdaddy

 

[ QUOTE ]
Good lord carps, you've got some pent up energy up inside you dude. Are you sure you're not a hummingbird?

[/ QUOTE ]
Yup, been absent for too long, and I need to get my post count back up, since it seems there's a compe***ion and i like a compe***ion. Hummingbird? Nah, more like a Kookaburra.

Which begs the question, if the Kookaburra is native to and only found in Australia, how come they are heard in the background of every Tarzan movie ever made?

 

Boy didn't this thread get away!!!

[ QUOTE ]
In fact there's a disclaimer on the editorial page of an enormous spelling mistake from the previous issue.


[/ QUOTE ]
And I almost pissed my pants when I read how Alex Xydias was impotent! Didn't know TRJ worked that hard (no pun intended) for their stories!

Question: When does TWO articles cons***ute too much coverage of one man's working life in building kustoms?

Congrats Bo, on the ink. I was impressed with this guys stuff from the moment I saw Carps vid which he copied for me a coupla years back.

OSR: keep it up.

Peace out brothers!

 

BigDaddy, You have a big mouth,which just cost you your dillusional money I owe....You think your cute and all,still livin at home with ma and pa,on the Hamb with your tough guy,Im into hotrods sales pitch....if only they knew the bullschitt like I do......... to bad the Hamb doesnt have a filter for the posers........