Olds rocket book/parts suggestions?

Hey guys,

I am picking up that 50 Olds with the 303/Hydro next spring, but I would like to plan the build up and find some parts over the winter.

Are there any good books on building Rockets? I have no experience rebuilding an OHV. (flathead guy, kinda)

What are some good sources for rebuild kits/speed parts?

Thanks,
topdeadcenter

 

Doc Fromahader (sp?) did a build up series of a early-mid 50s Rockets in Custom Rodder about 18 months ago ( it was called "Lead Rockets".
I've seen a fair few shop manuals on EBay if they are of any help.
Also in Ebay I've seen stacks of inlet manifolds 4x2, 3x2s etc. One of the guys here has a whole collection of those.. forget who though.. might of been foiledagain ??

 

I photo copied that Lead Rockets series. It's a good series for a rocket build up. I could send you a copy if you want.

Rocketeers

 

That would be awesome. I sent you a PM with my address.
Which motor is the build-up on?

TDC

 

It's a 324 build up. As for parts you may need try Egge machine, Fusick's, Kanter or good old Ebay. Pick up a copy of Hemmmings, lots of parts in there also.

 

Peter,
Its not scannable is it ? I wouldn't mind a copy down here too, I have some good info here that the dude at Rocket science (Ron) sent me a couple of years ago, from memory its copied and able to be emailed its more about Hop up and improvements (352 Ford Pistons and 4 inch bore) and what you need to do.... lemme know if you need it for the web site etc.

 

In a sister magazine he did a buildup on a 394. if you need a 3x2's or a 2x4 intake , i have some, as well as a 2x2 setup with or without carbs. rockett88 has seen some of the stuff on my walls, but it keeps changing every so often.

 

Lakes has some pretty cool treasures! Bill, I think it's almost I came down for another visit.
TDC, I just copied a set for you, gunna stuff em in an envelope and send it off today.