Pay it foward = free parts for HAMB members

I keep coming across this while looking for other stuff, and thought of this post in the driveway, tonight: a very-good-condition driver's side arm rest for a '57 F100, or maybe you can make it fit your ride. I'll pitch in shipping, make it absolutely free. This is one of the types of Threads that makes the HAMB so full of heart, btw.

 

Humbolt Cat,
I am sure that will fit my '59 and I could use it, I'll take it if no one else has.
Thanks
I guess I'll have to look around for some more stuff to throw up here.

 

Hey yer in Atwater, went to college in Turlock. You got it, Rusty Gem, glad to help.

 

Its a shot in the dark, but anyone have a used chrome spoon pedal? Doesn't even need to be chrome. Shot in the dark. Great post.

 

Such a great idea! Here's my contribution...

Pay it forward parts:
*windshield and small back window for a 55-59 Chevy/GMC truck (small chip on pass. side of windshield); pic1 pic2 - pick up only
*4 speed transmission for larger Chevy/GMC truck 50s or 60s?; pic1 pic2 - pick up only
*misc. parts for 55-59 Chevy/GMC truck including defroster vents, gas tank straps, headlight bezel; pic1 pic2 pic3
*rebuilt Carter carb off of a 1947 Chevy 216 pic

Looking for (all for a 55-59 Chevy/GMC longbed stepside truck):
*tail lights
*any 4x4/NAPCO parts
*patch panels for door bottoms and cab headliner (where visors and radio speaker mount)
*4 speed for a 1/2 or 3/4 ton
*wiring harness

Thanks!

 

Received pistons from Dads1954 (FAST shipping!) and will be sending out the Carter carb to 6inarow by hopefully this weekend.

Bump to the top! Let's keep this going!

 

Thanks to Reverendcolin super fast for a free part ! ! ! I updated my contribution list on page 17 and I will also offer up:

(2) 1941 Chevy 6 lug car rims for pick up only
(1) 50's? Chevy radio for parts

 

I could use the 6 volt stuff if you still have it, mainly the positive ground pump and headlight bulbs.

I have a new set of foxcraft 68 ford fender skirts to offer up, with all mounting brackets and in the original boxes. Jim

 

It just came to me: I'm the most recent to get my part and post. I got an adapter for an old hemi fuel pump and this all started with a hemi fuel pump. Irony?

 

What Holley 4 barrels do you have?

 

I've got some 64 fairlane door shells 2 fronts and 1 rear drivers side door and station wagon rear folding seat in the Victorville,ca area if anyone need them. PM me

 

i have a heavy duty 40's steering box. Culumn is cut foot up still have column. steering arm is still on but arm puts cut off. May be worth something to someone. Its free just pay shipping. Just to give ya an idea of size the diam of the steering arm spline to spline is 1.5"
its a beast come pick it up

Also have a 1936 chevy steering arm

Hupmobile windshield posts too

 

Ive got a back glass for a 50 Chevy 4 door I think? it was about a inch too big for the coupe I was working on If any one can use it you can have it but ya gotta pick it up

 

cast iron power glide from a 56 chevrolet...its yours come get it.

and I have a rear window for a 60 impala , nice and clear you can have that too.

 

I forgot to post...
Got a chop-saw in need of repair fro 48Fordnut.
Sent 1 of my 2 sets of FE headers I had listed to Bloodyknucklehill.
Everything else in my original post is still sitting in my garage floor. I'll repost with a longer list next time I get time to clean some more

 

hell, i could make you one of those,doesn't look too hard to make,i've got some 32 ford spindles for a template even....is the hole on the top tapered? to use a tapered 11/16" ford ball joint?

 

PM me

What I need:
Carter W-1 carbs
63 Grand Prix or Bonneville hood

Free for the taking:
49 chevy 16" truck rims
49 chevy truck axle
62 Rochester carb

 

Have some misc 46/47/48 stainless, come get it

 

Thats ford stainless

 

I'm interested in the stainless, how much do you need for shipping? Zip's 95519

 

No longer running an FE motor, I have various parts in very good condition. FE parts ain't cheap, wanted to donate to the 352-to-428'ers in need.
I have some parts with very little mileage, like a fairly new oil pump, I two dizzies - one w/ a good cam lobe but really tight (stock '72), the other a FoMoCo aftermarket that's more loose but worn cam lobe. Got caps, plug wires, at least a new condensor, a mix-match kit's worth, really.

 

some one on here asked me for skirts I have them out off storage pm me with your info.....
they have been promised so if it wasn't you don't contacted me

 

i pm'd you about the other 2 carb adapters..

 

PMed you back.

 

I've got an old Mopar Overdrive or M6 transmission.

Not sure just what it is. But have been told it was an OD.
I got this when I picked up a 55 Chrysler parts car. It was in the back seat and not the transmission that was for the car.
I don't know if it's good or not. I figure it may be good for parts.
If you're interested, contact me.
This is a pick up only. I won't palletize it, pack it or ship it.

Here's some pic's on Photobucket:
http://s151.photobucket.com/albums/s154/reverendcolin/tranny/

 

If anyone in the northwest needs a Chrysler 361 w/aluminum torqueflite I have them but you have to pick them up. Engine ran fine a couple of years ago when it was pulled out of a 57 DeSoto. I think it's a 61-62 engine. Also have a 56 F100 rear axle, complete, 3.90 gears, u-haul. I have a cherry picker to load with.

 

Still trying to get rid of the 2 '57 Chevy 2 door sedan doors + other misc. 55-57 stuff. Also O/T '67 Olds Cutlass doors rusty but good glass and regulators&vent window assemblys. 348 or 409 big truck water pump assembly and a HUGE clutch. Come get it in Gettysburg PA.33-34 Ford radiator also. Doesn't anyone else want this stuff?

 

looks like an old Gyro-matic

 

whoa!! do you have any trim for a 55 210? I've been looking for a decent hood bar and surrounds. I have to go through stuff I have to see what I can offer up

 

Pm sent. Also my buddy is checking on those specific pieces for you.