Pics of my 53 Chevy

I would like to share some photos of my project. It's a 53 Chevy 3600 with a 261. I made some modifications and have a few more in mind. I hope to be on the road next summer. Here is the site for my photos.
http://s281.photobucket.com/albums/kk209/Chevy_3600/?start=0

 

I gotta say that serpentine belt system is awesum and I think we are going to need more info on that! PAUL

 

Very unique custom pulley system.

Looking at your pics, I noticed copper lines to the full flow filter.
Are those compression fittings?

I used to have double-flared copper lines on my 261 during break in, but for peace of mind switched to custom made hydraulic lines from my local NAPA store.

Unlike copper, the 2400lbs rated hydraulic lines and m***ive fittings will last as long as the engine.
I have pics of them in my signature link.

I only post this, cos the rest of your build and engine looks very solid and well thought out.
Great job!

 

2400lbs, you must have a REALLY high pressure oil pump! I have a 54 Chevy I'm building. I used copper on my filter as well with double flairs. When it came time to reattach the oil pressure gauge I reused the original copper tubing since it was still good after 54 years, I think copper to the filter will last longer than the motor. Besides, copper looks cool on an old engine, which brings me to the next subject.
I like the serpentine system too, well thought out and very well done, but it looks too modern on that engine imo.

 

I'd be more worried about that fram filter than those compression fittings.

 

Didn't even notice the fram filter...
Wix or Napa Gold (same filter made by Wix) is a better and safer choice.

 

I agree. That would make a great tech article.