Hot Rods Question regarding 63 Econoline Kingpin

Hello Hamb'rs;
Say question if someone could help please.
Friend asked me to rebuild some Spindles for a guys Chevy Gasser. They are 63 Econoiline. Pressed out the bushings from the knuckle and could smell loctite. Looking closer saw they were not factory and were someones turned up bushings that had been Knurled also.
So my worry is that someone may have also messed with the bores. Possibly also altering Kingpin inclination.
Does anyone know the OD of the bushing?? Thought I was just going to be getting the Moog kit and get these babies back together quick. Hoping this doesn't turn into a freebie job that I have to spend a bunch of time on getting back together correctly.
Thank for your consideration
Luke

 

post some pics - some specs on speedwaymotors.com

 

This should help.
http://econoline.org/axle_front.php

 

Thank you jalopy I didn't think about speedway having that number but low and behold. Thank you very much can measure those bores up when get back to shop. Have a good day bud.

 

Thank you John. Great site especially having the Kingpin numbers.
You guys just made my job easier. HAMB so happy to be apart of group.