Hey Guys, We had a 2004r built for my dad's 55 with a lockup kit installed that just requires one 12v wire. Unfortunately something is wrong with the trans build and it doesn't build any more pressure than 50 psi. So out went the rebuilt trans and in went the 2004r from my old Monte Carlo SS until the tranny guy fixes the new one. So we just need a quick toggle switch for the lockup action for the trip to back to the 50's. We don't need anything fancy as the hopefully fixed rebuilt trans with the lockup kit will be coming and going in a bit later this summer. The plug on the trans has three wires coming out of it. Does anybody know how to wire it up to a toggle switch to lock the converter? Thanks!